Synthesis,isolation and characterization of methyl levulinate from cellulose catalyzed by extremely low concentration acid

A direct synthesis of methyl levulinate from cellulose alcoholysis in methanol medium under mild condition (180–210 °C) catalyzed by extremely low concentration sulfuric acid (≤0.01 mol/L) and the product isolation were developed in this study. Effects of different process variables towards the catalytic performance were performed as a function of reaction time. The results indicated that sulfuric acid concentration, temperature and initial cellulose concentration had significant effects on the synthesis of methyl levulinate. An optimized yield of around 50% was achieved at 210 °C for 120 min with sulfuric acid concentration of 0.01 mol/L and initial cellulose concentration below 100 g/L. The resulting product mixture was isolated by a distillation technique that combines an atmospheric distillation with a vacuum distillation where n-dodecane was added to help distill the heavy fraction. The light fraction including mainly methanol could be reused as the reaction medium without any substantial change in the yield of methyl levulinate. The chemical composition and structural of lower heavy fraction were characterized by GC/MS, FTIR, ¹H-NMR and ¹³C-NMR techniques. Methyl levulinate was found to be a major ingredient of lower heavy fraction with the content over 96%. This pathway is efficient, environmentally benign and economical for the production of pure levulinate esters from cellulose.     

High sensitivity chemiluminescence enzyme immunoassay for detecting staphylococcal enterotoxin A in multi-matrices

In this study, detection of staphylococcal enterotoxin A (SEA) in multi-matrices using a highly sensitive and specific microplate chemiluminescence enzyme immunoassay (CLEIA) has been established. A pair of monoclonal antibodies (mAbs) was selected from 37 anti-SEA mAbs by pairwise analysis, and the experimental conditions of the CLEIA were optimized. This CLEIA exhibited high performance with a wide dynamic range from 6.4 pg mL⁻¹ to 1600 pg mL⁻¹, and the measured low limit of detection (LOD) was 3.2 pg mL⁻¹. No cross-reactivity was observed when this method was applied to test SEB, SEC1, and SED. It has also been successfully applied for analyzing SEA in a variety of environmental, biological, and clinical matrices, such as sewage, tap water, river water, roast beef, peanut butter, cured ham, 10% nonfat dry milk, milk, orange juice, human urine, and serum. Thus, the highly sensitive and SEA-specific CLEIA should make it attractive for quantifying SEA in public health and diagnosis in near future.     

Laboratory Studies of Depressurization with a High Concentration of Surfactant in Low-Permeability Reservoirs

To solve the problem of high pressure of water injection in low permeability reservoirs, a high concentration of surfactant system was developed in this article. With the solubilization of oil in aqueous surfactant solution as a criterion, a formula was screened from anionic and nonionic-anionic surfactants, and the optimal depressurized system was obtained as follows, 13.3% surfactant HEX +2.23% n-propanol +4.47% n-butanol, the solubilization capability being up to 0.66 g/g. This system had good salt tolerance, and it exhibited water external microemulsion in the range of of 1 to 200 g/L NaCl. Core flooding results show that this high concentration of surfactant system formed water external microemulsion with the residual oil in the core, reducing the displacement pressure over 35%. Meanwhile, the effects of concentration and injection volume on depressurization were also investigated. It is indicated that a good depressurization effect was achieved after injecting 1 pore volume of the system with the salt concentration of 100 g/L.     

内蒙五牧场矿区11号煤层原煤大分子结构特征及其形成机制

在对内蒙古自治区呼伦贝尔市伊敏盆地五牧场区11号煤层原煤工业分析、元素分析、¹³C-NMR、FT-IR、XPS等分析基础上,获得了煤大分子结构中碳骨架信息、脂肪结构以及含氧官能团类型及比例、氮原子的存在形式和比例等结构信息。以此为基础,构建了煤的大分子结构模型,并应用 ¹³C-NMR预测软件ACD/CNMR predictor 对其进行了修正, 获得与实验核磁共振谱图吻合较好的大分子结构模型。大分子结构的芳香结构单元以苯、萘、蒽、菲为芳香结构单元,数量分别是1、2、2、1,醚键、氢化芳环以及邻位亚甲基作为连接芳香结构的主要桥键;氧原子以酚羟基、羰基、羧基的形式存在,数量分别是7、3、2;氮原子分别以吡啶和吡咯的形式存在,甲基和脂肪短链分布在芳香单元的边缘。与相邻矿区的褐煤及相近变质程度的神东长焰煤的比较发现,其形成机制主要是在高温低压环境下,热演化过程中快速失去各种含氧官能团,导致短链脂肪类物质的形成,而低压环境则有利于热演化过程中形成的各种小分子物质逸散导致自由基的缩聚,形成较大的芳香结构单元,但是直链脂肪类物质的存在具有位阻效应,不利于芳香结构单元的定向排列,导致所谓的"化学成分成熟超前于其结构成熟"现象。     

The effect of terminal chain modifications on the mesomorphic properties of 4,4′-disubstituted diphenyldiacetylenes

The typical sidewalls produced in the fabrication of protrusion electrodes are proposed to create a low voltage (4.5 V_rms) and high transmittance (93%) blue-phase liquid crystal display (BP-LCD). The tilted electrodes produce a strong horizontal electrical field that reduces the operating voltage considerably. The common problem of the ‘dead zones’ is solved by reflecting the light onto the electrodes. In order to estimate the phase retardation of the reflected light, a ray tracing simulation program for anisotropic mediums has been developed. The proposed device is more competitive than vertical field switching based BP-LCD and also, has the advantages of protruded in-plane-switching structures. These facts make this technology a potential candidate for the next generation of BP-LCDs.     

Mechanistic Insights into Copper‐Catalyzed Sonogashira–Hagihara‐Type Cross‐Coupling Reactions: Sub‐Mol % Catalyst Loadings and Ligand Effects

An efficient catalytic system for Sonogashira–Hagihara‐type reactions displaying ligand acceleration in the copper‐catalyzed formation of C(sp²)? C(sp) bonds is described. The structure of the ligand plays a key role for the coupling efficiency. Various copper sources show excellent catalytic activity, even in sub‐mol % quantities. A wide variety of substituents is tolerated in the substrates. Mechanistic details have been revealed by kinetic measurements and DFT calculations.     

Distinct Stepwise Reduction of a Nickel?Nickel‐Bonded Compound Containing an α‐Diimine Ligand: From Perpendicular to Coaxial Structures

A nickel? nickel‐bonded complex, [{Ni(μ‐L^.?)}₂] ( 1 ; L=[(2,6‐iPr₂C₆H₃)NC(Me)]₂), was synthesized from reduction of the LNiBr₂ precursor by sodium metal. Further controllable reduction of 1 with 1.0, 2.0 and 3.0 equiv of Na, respectively, afforded the singly, doubly, and triply reduced compounds [Na(DME)₃] ? [{Ni(μ‐L^.?)}₂] ( 2 ; DME=1,2‐dimethoxyethane), [Na(Et₂O)]Na[(L^.?)Ni? NiL^2?] ( 3 ), and [Na(Et₂O)]₂Na[L^2?Ni? NiL^2?] ( 4 ). Here L represents the neutral ligand, L^.? denotes its radical monoanion, and L^2? is the dianion. All of the four compounds feature a short Ni? Ni bond from 2.2957(6) to 2.4649(8) Å. Interestingly, they display two different structures: the perpendicular ( 1 and 2 ) and the coaxial ( 3 and 4 ) structure, in which the metal? metal bond axis is perpendicular to or collinear with the axes of the α‐diimine ligands, respectively. The electronic structures, Ni? Ni bonding nature, and energetic comparisons of the two structure types were investigated by DFT computations.     

碱液后处理对纳米ZSM-5沸石孔道和酸度的影响

采用XRD、N2物理吸附、NH3-TPD以及TEM、IR和NMR手段,系统研究了NaOH碱液后处理对低硅铝比纳米ZSM-5沸石(Si/Al摩尔比为14.5、晶粒度为20～50 nm)孔道和酸度的影响.结果表明,在碱液中,低硅铝比纳米ZSM-5沸石主要发生限域脱硅,而且低硅铝比纳米ZSM-5沸石的碱液脱硅难度大于高硅铝比沸石.但在适当的碱液处理条件下(碱硅比为0.19～0.35,温度为60～80℃,处理时间为2～5 h)可以在其晶体内产生大量介孔,增加比表面积和孔容;同时增加弱酸和中强酸的浓度,并提高L酸比例.L酸的大量增加主要是由于产生了裸露的骨架铝(≡Alδ+),这与文献的观点有所不同.     

碳纳米管复合微球修饰L-色氨酸及其对LDL的吸附性能

本文以多孔碳纳米管/活性炭复合微球为载体, 以L-色氨酸为配基, 采用环氧氯丙烷偶联法, 制得修饰L-色氨酸的碳纳米管/活性炭复合微球(L-CNTs/AC)。采用扫描电镜、氮气吸附、傅立叶红外光谱、热分析、X射线光电子能谱等对复合微球进行表征;通过体外静态吸附法对其低密度脂蛋白(LDL)吸附能力进行初步研究。结果表明:环氧氯丙烷偶联法可接枝上L-色氨酸。复合微球中碳纳米管加入量越多, 对LDL的吸附能力越强;当碳纳米管加入量为45wt%时, 对LDL的吸附量达4.623 mg·g^-1, 是未添加碳纳米管的2.3倍多。这是因为碳纳米管不仅可促进复合微球中20~100 nm孔的形成, 而且还可促进复合微球配基修饰量的增多, 从而大大增强了复合微球对LDL的吸附能力。此复合微球可望开发成一种新型的血液灌流LDL吸附剂。     

Similarities and Differences of Low Salinity Polymer and Low Salinity LPS (Linked Polymer Solutions) for Enhanced Oil Recovery

Linked polymer solution (LPS) is nano-size particles made of hydrolyzed polyacrylamide (HPAM) cross-linked with aluminum citrate. The propagation of LPS has been compared to non-cross-linked polymers at low brine salinity condition. The possible differences in properties and potentials for oil recovery have been investigated using water-wet and intermediate-wet cores. The target oil for polymer flooding (PF) is assumed to be the portion of the reservoir that has been bypassed by water during waterflooding and not the residual oil saturation in flooded zones. Our recent studies have shown that a positive synergy can be obtained by combining low salinity and PF. It has been claimed in the literature that cross-linking polymer such as colloidal dispersion gels (colloidal dispersion gels (CDG), micron-size aggregates) or LPS (nano-size particles) would extend the application of polymers to also include change in residual oil saturation. The results of this study indicated higher pressure buildup when low salinity LPS was propagated through brine saturated cores compared to low salinity polymer solution. The pressure buildup was even stronger for high salinity LPS injection. In two phase flow experiments, both polymer and LPS under low salinity condition, showed approximately similar propagation and oil recovery potential when injected into water-wet and intermediate-wet cores.