The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

Morphology and crystallization of blends of linear low density polyethylene with a semiflexible liquid crystalline polymer

The morphology and the crystallization behavior of blends of linear low density polyethylene (LLDPE) with an experimental sample of a semiflexible liquid crystalline polymer (SBH 112 by Eniricerche, Italy) have been studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and scanning electron microscopy (SEM). The blends possess a two-phase morphology, due to immiscibility of the two components. SEM observations show that dispersion of the minor SBH phase is favored at low (相似文献   

黑腔靶X光转换,输运的定量测量

为了测量黑腔靶X光引光效率、转换效率,我们设计了相应的分解靶(泄漏靶)实验,1989～1992年在″神光″装置上共进行了四次漏靶分解实验,利用灵敏度作了绝对标定的平响应X光二极管对漏靶注入孔、引光孔流出的X光角分布进行了测量,测出了x光角分布,得到了黑腔靶X光转换效率为50％～60％,引光效率约6％,为以后辐射驱动内爆研究的理论计算和靶的优化设计提供了重要的数据。     

Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

IDENTIFICATION OF LANOSTANES AND THEIR POSSIBLY GEOCHEMICAL SIGNIFICANCE IN BIYANG DEPRESSION

In the study, a series of C_(30)-C_(32) lanostane homologs have been identified from Eogene source rocks and crude oils of Biyang depression in Henan Province, China. Based upon the geochemical investigations and simulating experiments, the idea that the generation of lanostane may mainly be related to the specific original organic inputs and low maturity has been proposed.     

水滑石焙烧产物Mg（Al）O为载体的Pt催化剂的正己烷临氢反应性能

制备了以水滑石焙烧产物－Ｍｇ－Ａｌ复合氧化物为载体的Ｐｔ催化剂，并考察了它在氢存在下的烃类转化反应性能，表明此类催化剂具有比一般的Ｐｔ／Ａｌ２Ｏ３更好的正己烷脱氢环化和异构化反应活性和选择性，更低的氢解反应活性。分别制备了以Ｈ２ＰｔＣｌ６、Ｐｔ（ＮＨ３）４（ＯＨ）２和Ｐｔ（ＮＨ３）４Ｃｌ２为浸渍剂的催化剂，其中以用Ｐｔ（ＮＨ３）４Ｃｌ２和Ｐｔ（ＮＨ３）４（ＯＨ）２制备的催化剂的脱氢环化反应和异构化     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

过渡金属对分子筛担载Pd催化剂上CO氧化性能影响

分别采用共浸和连续浸渍法制备了一系列添加过渡金属的Pd-M-Ox-NaZSM-5(M=Cr，Mn，Fe，Co，Ni，Cu，Zn，Mo，Zr等)负载型催化剂．以CO氧化为探针反应，考察了不同制备方法对CO氧化性能影响，结果表明共浸法制备的各催化剂其活性明显优于连续浸渍法．详细考察了反应温度、Fe含量、氢气预还原、空速以及水蒸气等对共浸Pd-Fe-Ox-NaZSM-5催化剂上CO氧化行为影响，并应用XRD和XPS等手段对催化剂体相结构和表面状态进行了表征．结果表明：加入Fe2O3可明显提高Pd/NaZSM-5催化剂活性，且催化CO氧化的转化率随反应温度及Fe含量增加而增加；空速增加以及H2预还原作用导致Pd-Fe-Ox-NaZSM-5活性有所降低；催化剂对水蒸气较为敏感．XRD测试结果表明催化剂中Pd组分处于较高分散状态，以红铁矿形式存在的Fe2O3的引入，促进了Pd物种在NaZSM-5载体上的分散．表面XPS分析证实Fe2O3与Pd物种间存在较强的相互协同作用，且催化剂表面Pd物种处于较高氧化状态．Pd的高分散及其与Fe2O3的相互协同作用是共浸催化剂具有高活性的关键因素．     

SAPO-34分子筛骨架稳定性的研究

利用差热分析，原位ＸＲＤ技术，高温条件下的焙烧和水蒸气处理并关联其催化性能变化，研究了ＳＡＰＯ－３４分子筛的热及水热稳定性，差热分析结果表明，ＳＡＰＯ－３４的骨架破坏温度高于１３００Ｋ，原位ＸＲＤ跟踪研究证实，ＳＡＰＯ－３４分子筛原粉在高温焙烧以除掉有机胺及随后的降温过程中无明显的骨架破坏；而焙烧型ＳＡＰＯ－３４在空气中放置一定时间后，水分子吸附微孔中明业降低样品的ＸＲＤ峰强度，且降低幅度随放置时