修饰聚合物液-固亲和萃取体系纯化大豆中的组氨酸

聚乙二醇(PEG)6000经亚氨基二乙酸(IDA)修饰后和CuSO4反应,形成PEG修饰聚合物PEG-(IDA-Cu)2 ,与吐温80、磷酸盐混合,构成液-固亲和萃取体系,直接从大豆蛋白匀浆中提取氨基酸.选定萃取条件为磷酸盐摩尔比n(K2HPO4)∶n(NaH2PO4)为4.8∶1,体系pH值 7.70,总盐浓度为1.60 mol·L-1;吐温80的体积分数为10.5%.结果表明该体系对大豆蛋白匀浆中氨基酸的二次萃取率为66.5%,用离子交换技术后继处理,得纯度较高的组氨酸.     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

Immobilized polysiloxanes as stationary phases for high-performance liquid chromatography and solid phase extraction

Polysiloxanes immobilized onto the surfaces of porous silica particles have proven to be good stationary phases for the separation of multiresidues of pesticides and their metabolic/degradation products by reversed-phase high-performance liquid chromatography (RP-HPLC). Similar materials have proven effective for pre-concentration and clean-up procedures using solid phase extraction. The present paper describes the preparation and some applications of several of these packing materials.     

燃煤过程痕量元素动力学机理的研究进展

由于痕量元素在煤中的含量低微、检测困难,加之其原子量一般较大,可能的反应途径多,使得相关的反应机理研究难度极大。本文结合作者的研究成果,介绍了煤燃烧过程中痕量元素化学反应动力学的国内外研究进展,包括痕量元素化学动力学机理的建立;相关的典型实验、计算模拟及其实验验证、动力学机理模型的简化;痕量元素反应动力学机理的完善和发展,包括采用简单碰撞理论、活化络合物理论(亦称过渡态理论,或绝对反应速率理论)对痕量元素化学反应动力学机理的修正;最后指出煤燃烧过程中痕量元素动力学研究的若干方向是: (1)痕量元素反应动力学模型数据库的建立;(2)煤燃烧过程中,主量元素和次量元素的动力学机理的完善; (3)各痕量元素之间动力学研究的开展; (4)实际燃烧过程中痕量元素动力学行为的研究。     

Assignment of chemical shifts in benzohydroxamic acid and structure of its silylated derivatives by 15N enrichment

¹⁵N isotopic enrichment was necessary for the unequivocal assignment of the ¹H NMR lines to the protons in the NH–OH fragment of benzohydroxamic acid, BHXA, C₆H₅CONHOH, in dry dimethyl sulfoxide solutions. The assignment [δ(NH) = 11.21, δ(OH) = 9.01, ¹J(¹⁵N,¹H) = 102.2 Hz, ²J(¹⁵N,¹H) <1.5 Hz], which is opposite to that used by other authors, confirms the assignment extended to BHXA by Brown and co‐workers from the spectra of acetohydroxamic acid. The enrichment allowed also assignment of the ²⁹Si lines in the spectra of disilylated benzohydroxamic acid, (Z)‐tert‐butyldimethylsilyl N‐tert‐butyldimethylsilyloxybenzoimidate (2) and (Z)‐tert‐butyldiphenylsilyl N‐tert‐butyldiphenylsilyloxybenzoimidate (3), and confirmed structure of the monosilylated products, N‐tert‐butyldiphenylsilyloxybenzamide (4) and N‐tert‐butyldiphenylsilyloxy benzoimidic acid (5). Copyright © 2003 John Wiley & Sons, Ltd.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

A method and program for mass quantum chemical calculations of protein—ligand docking complexes

A new fast computational method for mass calculations of docking complexes by the AM1/PM3 semiempirical methods is proposed. The computation time is shortened by at least an order of magnitude compared to alternative schemes of quantum chemical calculations. The root-mean-square deviation of the AM1 calculated energies of formation of complexes from the results obtained by conventional diagonalization procedure is at most 0.4 kcal mol⁻¹. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 418–420, February, 2008.     

Physics in Melbourne

I survey highlights of the practice of physics and allied sciences in Melbourne,Australia, from the 1850s, soon after Europeans first settled in the area, to the present. I note recognizable sites of past and current physical-science activity that may be visited, as well as exhibits of historic items of physics apparatus. I trace the role of physics, in the course of a century and a half, in the evolution of a pioneering settlement into a large city embedded in a modern industrial economy.