Synthesis,characterization and electrochemical performances of LiFePO4/graphene cathode material for high power lithium-ion batteries

LiFePO₄/graphene (LiFePO₄/G) cathode with exciting electrochemical performance was successfully synthesized by liquid phase method. LiFePO₄ nanoparticles wrapped with multi-layered grapheme can be fabricated in a short time. This method did not need external heating source. Heat generated by chemical reaction conduct the process and removed the solvent simultaneously. The LiFePO₄/G were analyzed by X-ray diffraction (XRD) analysis, scanning electron microscope (SEM), transmission electron microscopy (TEM), magnetic properties analysis and electrochemical performance tests. The LiFePO₄/G delivered a capacity of 160 mAh g⁻¹ at 0.1C and could tolerate various dis-charge currents with a capacity retention rate of 99.8%, 99.2%, 99.0%, 98.6%, 97.3% and 95.0% after stepwise under 5C, 10C, 15C, 20C, 25C and 30C, respectively.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

Electrolytic Formation of Crystalline Silicon/Germanium Alloy Nanotubes and Hollow Particles with Enhanced Lithium‐Storage Properties

Crystalline silicon(Si)/germanium(Ge) alloy nanotubes and hollow particles are synthesized for the first time through a one‐pot electrolytic process. The morphology of these alloy structures can be easily tailored from nanotubes to hollow particles by varying the overpotential during the electro‐reduction reaction. The continuous solid diffusion governed by the nanoscale Kirkendall effect results in the formation of inner void in the alloy particles. Benefitting from the compositional and structural advantages, these SiGe alloy nanotubes exhibit much enhanced lithium‐storage performance compared with the individual solid Si and Ge nanowires as the anode material for lithium‐ion batteries.     

Developments in electrochemical processes for recycling lead–acid batteries

The lead–acid battery recycling industry is very well established, but the conventional pyrometallurgical processes are far from environmentally benign. Hence, recent developments of lead–acid battery recycling technologies have focused on low-temperature (electro)hydrometallurgical processes, the subject of this review, covering modified electrolytes, improved reaction engineering, better reactor design and control of operating conditions.     

In Situ Electropolymerization Enables Ultrafast Long Cycle Life and High-Voltage Organic Cathodes for Lithium Batteries

Organic cathode materials have attracted extensive attention because of their diverse structures, facile synthesis, and environmental friendliness. However, they often suffer from insufficient cycling stability caused by the dissolution problem, poor rate performance, and low voltages. An in situ electropolymerization method was developed to stabilize and enhance organic cathodes for lithium batteries. 4,4′,4′′-Tris(carbazol-9-yl)-triphenylamine (TCTA) was employed because carbazole groups can be polymerized under an electric field and they may serve as high-voltage redox-active centers. The electropolymerized TCTA electrodes demonstrated excellent electrochemical performance with a high discharge voltage of 3.95 V, ultrafast rate capability of 20 A g⁻¹, and a long cycle life of 5000 cycles. Our findings provide a new strategy to address the dissolution issue and they explore the molecular design of organic electrode materials for use in rechargeable batteries.     

Light/Electricity Energy Conversion and Storage for a Hierarchical Porous In2S3@CNT/SS Cathode towards a Flexible Li-CO2 Battery

A photoinduced flexible Li-CO₂ battery with well-designed, hierarchical porous, and free-standing In₂S₃@CNT/SS (ICS) as a bifunctional photoelectrode to accelerate both the CO₂ reduction and evolution reactions (CDRR and CDER) is presented. The photoinduced Li-CO₂ battery achieved a record-high discharge voltage of 3.14 V, surpassing the thermodynamic limit of 2.80 V, and an ultra-low charge voltage of 3.20 V, achieving a round trip efficiency of 98.1 %, which is the highest value ever reported (<80 %) so far. These excellent properties can be ascribed to the hierarchical porous and free-standing structure of ICS, as well as the key role of photogenerated electrons and holes during discharging and charging processes. A mechanism is proposed for pre-activating CO₂ by reducing In³⁺ to In⁺ under light illumination. The mechanism of the bifunctional light-assisted process provides insight into photoinduced Li-CO₂ batteries and contributes to resolving the major setbacks of the system.     

Engineering Carbon Distribution in Silicon-Based Anodes at Multiple Scales

The successful commercialization of promising silicon-based anode materials has been hampered by their poor cycling stability caused by the huge volume change. Integration of the carbon matrix with silicon-based (C/Si-based) anode materials has been demonstrated to be a powerful solution to achieve satisfactory electrochemical performance. This minireview aims to outline recent developments on C/Si-based composites, with the emphasis on the importance of carbon distribution at multiple scales. In addition, the forms of the carbon framework (carbon sources and doping of heteroatoms) have been summarized. Particularly, a novel C/Si-based hybrid with carbon distributed at the atomic scale has been highlighted.