纳米级碳导电剂的种类对licoo2电化学性能的影响

碳纳米管;锂离子电池;正极;倍率容量;导电剂     

Electrical Properties of Polycrystalline Lithium Chloroboracite Prepared by the Sol-Gel Method

The electrical properties of polycrystalline lithium chloroboracite, Li4B7O12Cl, prepared by the sol-gel method were investigated in connection with their structure. Li4B7O12Cl pellets were prepared with different amounts of hydrochloric acid or ammonium chloride. The kind and amount of the chlorine source affected the formation of by-products (Li2B4O7, LiCl, a glass phase) and the morphology of the Li4B7O12Cl pellets. Thus their conductivity, which is dominated by grain boundary response owing to the high porosity of the materials, was also affected. The formation of Li2B4O7 as a by-product led to a higher activation energy and lower conductivity. In those pellets in which Li2B4O7 did form, an increase of the amount of glass phase led to higher conductivities.     

偏钛酸型锂离子交换剂固相合成反应动力学

偏钛酸型锂离子交换剂固相合成反应动力学钟辉＊郭灵虹（成都理工学院应用化学系成都６１００５９）（四川联合大学分析测试中心成都）关键词偏钛酸锂，离子交换剂，合成，固相反应动力学１９９７－０８－２５收稿，１９９７－１２－１０修回四川省应用基础研究基金资助项...     

Molar volumes and ion pairing of lithium halides in alcohols

The concentration dependence of the apparent molar volumes of lithium halides (and electrolytes in general) in alcohols (and solvents permitting association in general) is, in the first instance, due to changes in the degree of association and to the inherent difference between the apparent molar volumes of the ions and of the ion pairs. Previous publications on the molar volumes of electrolytes in organic solvents, disregarding altogether ion pairing, appear to be incorrect. Data from the literature for lithium chloride and lithium bromide in normal primary alcohols and several branched alcohols from C₁ to C₈ and data from our laboratory for lithium halides in 1-hexanol and 2-ethyl-1-hexanol served for the determination of φ _V and φ _E . Electrical and structural contributions to the values of these functions for the ions and for the ion pairs are discussed.     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

One‐Shot Double Elimination Process: A Practical and Concise Protocol for Diaryl Acetylenes

A variety of diaryl acetylenes were obtained in good yields when lithium hexamethyldisilazide was added to a solution of arylmethyl sulfone, aryl aldehyde, and chlorodiethylphosphate in THF. In this one‐shot process, a number of transformations such as aldol reaction, phosphorylation of aldolate, and double elimination of the resulting β‐substituted sulfone proceeded successively to afford the desired acetylenes. The one‐shot process was accelerated by the substitution of halogen atoms on the phenyl groups, and unsymmetrically substituted diaryl acetylenes were obtained without contamination of the dehalogenated products. Diaryl acetylenes with other substituents such as CF₃, ethoxycarbonyl, dimethylamino, TMS‐acetylene groups, as well as pyridinyl and thienyl moieties were also accessible with this method. However, methoxy‐substituted compounds were obtained in moderate yields under the same conditions, but the yields were increased when lithium diisopropylamide was used instead.     

Recovery of pyridine from aqueous solution by membrane pervaporation

Three different membranes, based on poly(dimethylsiloxane) (PDMS), cation-exchange material and poly(vinyl alcohol) (PVA) respectively, were tudied for the separation of pyridine-water mixtures by pervaporation. The PDMS membrane was preferentially permeable to pyridine and the other two were selective towards water. Three membranes showed different permeation performance, allowing the application of the technique to the separation of feeds of different composition. The temperature profile of the permeability suggests that it is possible to carry out the operation at an elevated temperature in order to achieve high productivity. A combination of the three types of membranes was designed for the production of anhydrous pyridine from dilute pyridine aqueous solution by pervaporation.