Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

尖晶石构造LiCu0.5Mn1.5O4的合成及其在水溶液中对Li^＋的抽出／嵌入反应

尖晶石构造ＬｉＣｕ０．５Ｍｎ１．５Ｏ４的合成及其在水溶液中对Ｌｉ＋的抽出／嵌入反应董殿权钟杰柳敦雷刘亦凡＊（青岛化工学院化学工程系青岛２６６０４２）关键词尖晶石，Ｌｉ－Ｃｕ－Ｍｎ复合氧化物，合成，锂离子交换１９９７－０９－１７收稿，１９９７－１２－２...     

Vibrational Spectroscopic Study on Ion Solvation and Association of Lithium Perchlorate in 4-Methoxymethyl-ethylene Carbonate

Solvation interaction and ion association in solutions of lithium perchlorate/4-methoxymethyl-ethylene carbonate （MEC） have been studied by using Infrared and Raman spectra as a function of concentration of lithium perchlorate. The splitting of ring deformation band and ring ether asymmetric stretching band, and the change of carbonyl stretching band suggest that there should be a strong interaction between Li^＋ and the solvent molecules, and the site of solvation should be the oxygen atom of carbonyl group. The apparent solvation number of Li^＋ was calculated by using band fitting technique. The solvation number was decreased from 3.3 to 1.1 with increasing the concentration of LiClO4/MEC solutions. On the other hand, the band fitting for the ClO4^- band revealed the presence of contact ion pair, and free ClO4^- anion in the concentrated solutions.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Evaluation of PTMSP membranes in achieving enhanced ethanol removal from fermentations by pervaporation

The use of membrane processes for the recovery of fermentation products has been gaining increased acceptance in recent years. Pervaporation has been studied in the past as a process for simultaneous fermentation and recovery of volatile products such as ethanol and butanol. However, membrane fouling and low permeate fluxes have imposed limitations on the effectiveness of the process. In this study, we characterize the performance of a substituted polyacetylene membrane, poly[(l-trimethylsilyl)-l-propyne] (PTMSP), in the recovery of ethanol from aqueous mixtures and fermentation broths. Pervaporation using PTMSP membranes shows a distinct advantage over conventional poly(dimethyl siloxane) (PDMS) membranes in ethanol removal. The flux with PTMSP is about threefold higher and the concentration factor is about twofold higher than the corresponding performance achieved with PDMS under similar conditions. The performance of PTMSP with fermentation broths shows a reduction in both flux and concentration factor relative to ethanol-water mixtures. However, the PTMSP membranes indicate initial promise of increased fouling resistance in operation with cell-containing fermentation broths.     

Zwei neue Silicat-Chloride mit zweiwertigem Europium: LiEu3[SiO4]Cl3 und Li7Eu8[SiO4]4Cl7

Two New Silicate-Chlorides with Divalent Europium: LiEu₃[SiO₄]Cl₃ and Li₇Eu₈[SiO₄]₄Cl₇ LiEu₃[SiO₄]Cl₃ was prepared by reaction of LiCl with Eu₂SiO₄ and Li₇Eu₈[SiO₄]₄Cl₇ from Li with Eu₂O₃, SiO₂ and LiCl. The crystal structures of LiEu₃[SiO₄]Cl₃ (Pmna, a = 946.95(13); b = 699.52(8); c = 1 368.0(2) pm; Z = 4; R1 = 0.0325, R2_w = 0.0642) and Li₇Eu₈[SiO₄]₄Cl₇ (P2₁/c; a = 851.85(5); b = 948.62(7); c = 1 679.0(2) pm; β = 96.221(8)°; Z = 2; R1 = 0.0352, R2_w = 0.0744) were determined from four-circle diffractometer data. LiEu₃[SiO₄]Cl₃ contains [Li(SiO₄)₂] units and LiCl₆ octahedra while in Li₇Eu₈[SiO₄]₄Cl₇ larger ?lithosilicate”? groups are found. In both structures, the Eu²⁺ ions are coordinated mostly eightfold by O^2? and Cl^? ligands.     

Alkylidinphosphane und -arsane. I [P ≡ C?S]−[Li(dme)3]+ – Synthese und Struktur

Alkylidynephosphanes and -arsanes. I [P ≡ C? S]^?[Li(dme)₃]⁺ – Synthesis and Structure O,O′-Diethyl thiocarbonate and bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide dissolved in 1,2-dimethoxyethane, react below 0°C to give ethoxy trimethylsilane and tris(1,2-dimethoxyethane-O,O′)lithium 2λ³-phosphaethynylsulfanide – [P≡C? S]^? [Li(dme)₃]⁺ – ( 1a ). Apart from bis(trimethylsilyl)sulfane or carbon oxide sulfide, dark red concentrated solutions of λ³-phosphaalkyne 1 are also obtained from reactions of carbon disulfide with bis(tetrahydrofuran)-lithium bis(trimethylsilyl)phosphanide or with the homologous lithoxy-methylidynephosphane ( 2 ) [1]. The ir spectrum shows two absorptions at 1762 and 747 cm^?1 characteristic for the P≡C and C? S stretching vibrations. The nmr parameters {δ(³¹P) ? 121.3; δ(¹³C) 190.8 ppm; ¹J_CP 18.2 Hz} resemble much more values of diorganylamino-2λ³-phosphaalkynes than those of bis(1,2-dimethoxyethane-O,O′)lithoxy-methylidyne-phosphane ( 2a ). As found by an X-ray structure analysis (P2₁/c; a = 1192.6(16); b = 1239.1(19); c = 1414.8(26) pm; β = 105.91(13)° at ?100 ± 3°C; Z = 4 formula units; wR = 0.064) of pale yellow crystals (mp. + 16°C) isolated from the reaction with O,O′-diethyl thiocarbonate, the solid is built up of separate [P≡C? S]^? and [Li(dme)₃]⁺ ions. Typical bond lengths and angles are: P≡C 155.5(11); C? S 162.0(11); Li? O 206.4(17) to 220.3(20) pm; P≡C? S 178.9(7)°.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Recovery of 177Lu from Irradiated HfO2 Targets for Nuclear Medicine Purposes

A new method of production of one of the most widely used isotopes in nuclear medicine, ¹⁷⁷Lu, with high chemical purity was developed; this method includes irradiation of the HfO₂ target with bremsstrahlung photons. The irradiated target was dissolved in HF and then diluted and placed onto a column filled with LN resin. Quantitative sorption of ¹⁷⁷Lu could be observed during this process. The column later was rinsed with the mixture of 0.1 M HF and 1 M HNO₃ and then 2 M HNO₃ to remove impurities. Quantitative desorption of ¹⁷⁷Lu was achieved by using 6 M HNO₃. The developed method of ¹⁷⁷Lu production ensures high purification of this isotope from macroquantities of hafnium and zirconium and radioactive impurities of carrier-free yttrium. The content of ^177mLu in ¹⁷⁷Lu in photonuclear production was determined. Due to high chemical and radionuclide purity, ¹⁷⁷Lu obtained by the developed method can be used in nuclear medicine.