酞菁配合物对锂-亚硫酰氯电池正极的催化作用

合成过渡金属酞菁配合物MPc(M=Mn(Ⅱ),Fe(Ⅱ),Co(Ⅱ),N i(Ⅱ),Cu(Ⅱ)),研究MPc及其中心离子对L i/SOC l2电池正极的催化作用,并提出相关催化机理.     

LiCaBO3的合成和LiBO2-CaO二元体系相图

某些无水硼酸盐具有熔点高、耐潮解、损伤阈值高、光学透过波段好等优点,在材料科学领域中一直受到人们的注视。陈创天等首次得到新型紫外倍频材料—低温相偏硼酸钡。之后,又合成了具有倍频效应的晶体材料α-LiCdBO_3。     

聚二巯化合物正极材料的合成及性质的初步研究

固态电池发展至今，许多比能量高、贮存性能好的新型电池产品不断涌向市场，而目前广泛用于正极材料的大多数物质是层状化合物［１］，如聚乙炔，聚苯胺等化合物，它们贮存能量的方式主要是通过插入化学反应来实现，本工作将合成一种高分子材料——２．５－二巯基－１，３...     

Li/富锂钒青铜(Li_6V_6O_(15))二次电池正极材料研究

近年来,人们对二次锂电池的正极进行了不少研究。许多过渡金属氧化物或硫化物,如V_6O(13),Li_(1+x)V_3O_8,TiS_2,MoS_2等被认为是较好的正极材料。Pistoia等研究了Li_(1+x)V_3O_8钒青铜的电化学性能得出,当Li浓度高时,由于电子定域作用使电荷屏蔽效应     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

金属锂二次电池锂负极改性

本文综述了金属锂二次电池中提高锂负极性能的研究进展。分别介绍了以下改性方法:对金属锂表面进行预处理,使其表面预先形成性能良好的固体电解质界面膜,或直接在其表面制备保护膜;在电解液中加入添加剂对锂电极进行表面改性;采用新型有机溶剂、离子液体、聚合物电解质、玻璃态固体电解质、塑晶固体电解质等电解质体系提高界面相容性;改进金属锂电极的制备工艺,如制备金属锂粉末多孔电极和电沉积锂电极、制备全固态薄膜锂电池以及利用物理方法处理锂电极。并在此基础上对今后的发展趋势进行了展望。     

单电子卤键复合体系H_3C…Br—Y(Y=H,CN,NC,CCH,C_2H_3)的作用机制

对单电子溴键复合物H3C…Br—Y(Y=H,CCH,CN,NC,C2H3)的结构与性质进行了理论研究.在B3LYP/6-311++G**水平上计算了稳定构型并做了频率分析.BSSE矫正的相互作用能(EBSSE)和NBO及AIM分析输入的波函数在MP2/6-311++G**水平下完成.复合物H3C…Br—Y中,CH3(供电子体)自由基均提供一未成对电子与Br—Y中Br(受电子体)形成了单电子溴键,此单电子溴键也具有三电子键的特征.单电子溴键的形成导致甲基H的背向Y弯曲和Br—Y键的拉长及红移单电子溴键复合物的产生.考察了电子受体中不同取代基,C(spn)-Br杂化及溶剂的存在对复合物作用的影响,将单电子氢键,单电子卤键和单电子锂键的作用强度做了对比,进一步对Popelier提出的氢键体系中的前三个重要拓扑指标在单电子溴键体系中的重现性进行了探讨.     

药物释放环境对层状复合氢氧化物载体的影响

以层状复合氢氧化物(LDH)为载体用离子交换法制取乙酰苯甲酸(ASP)的插层复合物LDH-ASP, 通过体外释放实验和固相XRD、FT-IR、TEM、TG-DSC及BET-N2比表面积表征, 研究了药物释放环境对载体结构的影响. 结果表明释放环境pH为4.30-6.89时, 载体的层状特征减弱但晶体类型不变; pH为2.48-4.30时, H2PO-4对LDH的嫁接反应引起层状化合物向复杂磷酸盐转化; 随环境pH由6.89降低至2.48, 载体纯度下降, 晶态性征减弱,微孔吸附活性降低.     

Structure of (Me<Subscript>2</Subscript>Cu)Li · 3DME and its oligomers [(Me<Subscript>2</Subscript>Cu)Li · 3DME]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 2–5): a theoretical study

The structures of monomeric lithium dimethylcuprate solvated by three 1,2-dimethoxyethane (DME) molecules (Me₂Cu)Li · 3DME and its oligomers [(Me₂Cu)Li · 3DME] _n (n = 2–5) in the gas phase were studied using the density functional theory. The structures of these systems are compared with that of (Me₂Cu)Li · 3DME in the crystal. It is shown that numerous C-H…Cu and C-H…C hydrogen bonds, as well as C-H…H dihydrogen bonds between DME molecules, which solvate lithium cations, and corresponding dimethylcuprate anions significantly affect the formation and structure of these compounds in the gas and solid phases. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 470–481, March, 2008.