铌酸锂晶体性能的组成依赖性(英文)

总结了铌酸锂晶体的各项性能指标,显示了其对晶体实际组成的强烈依赖性.利用化学键模型定量地解释了这种依赖性产生的根源,从而说明了制约该晶体性能提高的关键因素是晶体结构中的缺陷控制.     

Synthese und Struktur von Li3RhH6, einem ternären Hydrid mit isolierten [RhH6]3−-Oktaedern

Synthesis and Structure of Li₃RhH₆ — a Ternary Hydride with Isolated [RhH₆]^3? Octahedra The ternary rhodium hydride Li₃RhH₆ was synthesized by the reaction of lithium hydride with rhodium under a hydrogen pressure of 80 bar. X-ray investigations on powdered samples and an elastic neutron diffraction experiment on the deuterated compound led to the complete structure determination (space group: Pnma, Z = 4). The atomic arrangement is isotypic to the Na₃RhH₆ structure type. The crystal structure contains isolated [RhH₆]^3? octahedra, which are separated by the lithium ions.     

The non-isothermal devitrification of lithium germanate glasses

The non-isothermal devitrification of lithium germanate glasses, examined by DTA and XRD, is reported and discussed. The glass compositions are expressed by the general formula:xLi₂O(1?x)GeO₂ withx=0.050, 0.125, 0.167, 0.200 and 0.250. All the glasses studied, unlike GeO₂ glass, exhibit internal crystal nucleation without the addition of any nucleating agent. The devitrification processes occur in one or more steps. Phases which crystallized at each step are identified and crystallization mechanisms proposed. These crystallization mechanisms are related to structures of the crystallizing phases. Activation energy values as well as those for glass transition temperatures, do not vary linearly with increase in Li₂O content but pass through a maximum atx=0.200.     

PVC DISULFIDE AS CATHODE MATERIALS FOR SECONDARY LITHIUM BATTERIES

PVC disulfide (2SPVC) was synthesized by solution crosslink and its molecular structure was confirmed by infrared spectrum. 2SPVC's specific area is 36.1 m2·g-1 tested by stand BET method, and granularity experiment gives out the particle size of d0.5= 11.3μm. With SEM (Scanning Electron Microscope) experiment the surface morphology and particle shape of 2SPVC were observed. Cyclic voltammetry (scan rate: 0.5 mV·s-1) shows that 2SPVC experience an obvious S-S redox reaction in charge-discharge process. When 2SPVC was used as cathode material for secondary lithium battery in a 1 mol·L-1 solution of lithium bis(trifluoromethylsulfonyl) imide (Li(CF3SO2)2N) in a 5:45:50 volume ratio mixture of o-xylene (oxy), diglyme (DG) and dimethoxymethane (DME) at 30℃, the first discharge capacity of 2SPVC is about 400.3 mAh·g-1 which is very close to its theoretical value (410.5 mAh·g-1) at a constant discharge current of 15 mA·g-1. It can retain at about 346.1 mAh·g-1 of discharge capacity after 30 charge-discharge cycles. So 2SPVC is a very promising cathode candidate for rechargeable lithium batteries.     

Analyzing electrochemical noise with Chebyshev’s discrete polynomials

The principles underlying a novel method intended for analyzing experimental data obtained when studying fluctuation processes are considered. The method in question is Chebyshev’s spectroscopy. The application of this method allows one to determine statistic characteristics of steady-state electrochemical noise against the background of severe deterministic interference without invoking the procedure of the fitting of the initial data. The potentialities of this novel method, which is intended for treating noise experiment, are demonstrated by examining model examples and analyzing the electrochemical noise generated by a lithium electrode placed in an aprotic organic electrolyte.     

聚苯醚磺酸锂与聚醋酸乙烯酯共混物的导电性能研究

为改善聚苯醚磺酸锂（SPPOLi）的导电性能，将聚酷酸乙烯酯（PVAc）与之共混，X-射线衍射分析表明，PVAc可降低SPPOLi凝聚结构的有序程度；发现共混后电导率有了较大提高，共混物的电导对温度的依赖关系不符合阿仑尼马斯方程；同时，共混物仍保持了单离子传导性．     

Interaction of long chain alkylammonium cations with reduced charge montmorillonite

Reduced charge montmorillonites (RCM) were prepared using lithium thermal treatment. The sorption of octylammonium (OA), dodecylammonium (DDA) and hexadecylammonium ions (HDA) on differently charged samples were studied. The amounts of DDA and HDA sorbed on each RCM exceed the cation exchange capacity (CEC) but that of OA exceeds only the CEC of samples with the lowest CEC. The sorption is affected not only by the layer charge but also by the formation of collapsed interlayer spaces in the lowest charged montmorillonites. X-ray measurements confirmed the decrease of the layer charge after lithium thermal treatment and the layer charge heterogeneity in RCMs.     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

层状LiMnO2的固相合成及电化学性能

以Mn₂O₃和氢氧化锂为原料，通过焙烧合成出o-LiMnO₂。用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。通过对不同温度条件下烧结样品的晶胞参数、布拉格(110)晶面峰半高宽及电化学性能研究发现：600 ℃下合成样品的半高宽最大，堆垛层错率高，同时电化学性能也最好，首次放电容量达到156 mAh·g^-1，20次循环后仍保持在140 mAh·g^-1以上。中高温固相合成的o-LiMnO₂材料，在晶粒范围大小相近时，材料电化学性能与材料堆垛层错率相关。     

Chemical bond in alkali metal sulfates

In the context of the density functional theory of the local electron density the valence and differential density distribution in crystalline sulfates of M₂SO₄ (M is Li, Rb, and Cs) and double sulfates of MLiSO₄ were calculated using the pseudopotential method in the basis set of numerical atomic pseudo-orbitals. It is shown that in lithium sulfate crystallographically inequivalent oxygen atoms are in different charge states and have a different force of chemical bonding with sulfur. Anions are bonded to each other through lithium atoms that form tetrahedral complexes with oxygen. In rubidium sulfates the electron clouds of the anions overlap and chain structures form. Chemical bonding between the anion and the cation has an ionic nature. These features of the electron structure manifest themselves in double sulfates, where LiO₄ complexes that link the anionic chains also form, and heavy metals serve as cations.