液相法制备(亚)铁磁性纳米材料

（亚）铁磁性纳米材料因其特殊的磁学性能,在生物、医药、电子器件、军工等领域具有广泛的应用前景。本文综述了（亚）铁磁性纳米金属铁、钴、镍以其合金和铁氧体的液相制备方法,包括沉淀法、水热/溶剂热法、微乳液法、多元醇工艺、热分解法、溶胶-凝胶法和超声化学法等;详细介绍了这些方法的反应机制和发展现状以及应用上述方法制备相关纳米材料的过程;分析了有关（亚）铁磁性纳米材料能够实现产业化的制备方法的发展趋势。     

生物油脂新型环氧化过程及机理研究

以金属有机化合物甲基三氧化铼(MTO)为催化剂, 双氧水为氧化剂新型化学方法合成环氧大豆油. 详细考察了催化剂在双氧水、溶剂和助剂等因素下的催化性能. 研究了该催化体系在其他油脂环氧化中的应用, 环氧产物的选择性在99%以上. 采用红外光谱法(IR)对产品进行表征. 通过紫外-可见分光光度法(UV-Vis)对催化剂的研究, 发现催化剂(MTO)在催化环氧化过程中形成催化中间体, 且催化活性很高. 对催化剂和双氧水相互作用机理及新型环氧化反应的机理进行了初步研究.     

基于离子液体的液相微萃取-高效液相色谱法测定水中有机磷农药

建立了基于1-丁基-3-甲基咪唑六氟磷酸盐离子液体的液相微萃取-高效液相色谱分析水样中甲拌磷、对硫磷和辛硫磷的方法。考察了萃取溶剂、萃取溶剂与样品溶液体积比、萃取时间、萃取温度和搅拌速度对液相微萃取的影响。在优化的萃取条件下,甲拌磷、对硫磷、辛硫磷3种农药的富集倍数分别为665、630和553倍;方法有好的线性范围(0.01-1μL/L)和低的检出限(0.001-0.01μL/L,S/N=3)。对0.1μL/L的甲拌磷,对硫磷和辛硫磷测定3次的相对标准偏差分别为3.44%、10.50%和2.41%。     

溶液法剥离的氮化碳在各种衬底上分散的AFM研究

石墨相氮化碳(g-C_3N_4)因为其特殊的层状结构及电子性质在催化和光催化领域里受到广泛关注和研究。本文以异丙醇及异丙醇-水混合溶液为介质对g-C_3N_4粉末进行超声液相剥离,并利用原子力显微镜详细表征了剥离后的溶液分散至云母、高定向热解石墨(HOPG)、Au(111)等不同衬底表面的结果。发现溶液经10h超声后,g-C_3N_4被剥离成尺寸约100nm左右的扁平颗粒,但无法形成完美的超薄层结构。这可能是由于经热聚合法合成的g-C_3N_4本身晶化程度较低所致。     

Determination of organochlorine pesticides in water using dynamic hook-type liquid-phase microextraction

We developed a simple and efficient headspace liquid-phase microextraction (LPME) technique named dynamic hook-type liquid-phase microextraction (DHT-LPME) and used it in combination with gas chromatography-mass spectrometry (GC-MS) and an electron capture detector (ECD). Aqueous specimens of organochlorine pesticides (OCPs) were used as model compounds to demonstrate the effectiveness of the technique. In the present study, the calibration curves were linear over at least 2 orders of magnitude with R² values of 0.997. The method detection limits (MDLs) varied from 2 to 44.0 ng L⁻¹. The precision of DHT-LPME ranged from 6.5 to 14.4%. The relative recoveries of OCPs in rainwater were more than 84.2%. Enrichment factors (EF) in the range 275-1127 were obtained using DHT-LPME.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

液相微萃取-高效液相色谱联用分析化妆品中痕量的雌激素

建立了液相微萃取-高效液相色谱联用(LPME-HPLC)测定爽肤水中痕量的雌三醇、雌二醇、炔雌醇和雌酮的分析方法,研究了萃取溶剂种类、接受相体积、搅拌速度、萃取时间等对萃取效率的影响。结果表明,该方法对4种雌激素的富集倍数可达到247~343倍,方法的线性范围为1~200 μg/L,检出限为0.4~1.0 μg/L,6次平行测定的相对标准偏差为3.6%~7.3%,爽肤水中的加标回收率为101.2%~114.9%。方法简单快速、灵敏度高、环境友好,满足痕量雌激素分析的要求。     

Ten years of dispersive liquid–liquid microextraction and derived techniques

Novel solvent microextraction techniques are presently receiving a great deal of interest from analytical chemists, as confirmed by the constantly increasing number of published papers on the topic. The present overview offers a comprehensive collection of publications devoted to dispersive liquid–liquid microextraction and dispersive liquid-phase microextraction as well as their modalities. We cover the articles that were available online up to April 30, 2016. The applications of these techniques are summarized in the tables.     

Highly Dispersible and Stable Anionic Boron Cluster–Graphene Oxide Nanohybrids

An efficient process to produce boron cluster–graphene oxide nanohybrids that are highly dispersible in water and organic solvents is established for the first time. Dispersions of these nanohybrid materials in water were extraordinarily stable after one month. Characterization of hybrids after grafting of appropriate cobaltabisdicarbollide and closo‐dodecaborate derivatives onto the surface of graphene oxide (GO) was done by FT‐IR, XPS, and UV/Vis. Thermogravimetric analysis (TGA) clearly shows a higher thermal stability for the modified‐GO nanohybrids compared to the parent GO. Of particular note, elemental mapping by energy‐filtered transmission electron microscopy (EFTEM) reveals that a uniform decoration of the graphene oxide surface with the boron clusters is achieved under the reported conditions. Therefore, the resulting nanohybrid systems show exceptional physico‐chemical and thermal properties, paving the way for an enhanced processability and further expanding the range of application for graphene‐based materials.     

Orthogonal array design for the optimization of hollow fiber protected liquid-phase microextraction of salicylates from environmental waters

In the present study, a three phase-based hollow fiber protected liquid-phase microextraction (HF-LPME) method combined with high-performance liquid chromatography (HPLC) for the determination of salicylates in environmental waters was developed. The HF-LPME procedure was optimized by an L₁₆(4⁵) orthogonal array experimental design (OAD) with five factors at four levels. Under the optimal extraction condition (pHs of donor and receiving phases of 3.0 and 6.2, respectively, extraction time of 45 min, stirring speed of 1000 rpm, and salt addition of 20% (w/v)), salicylates could be determined in a linear range from 0.025 to 1.0 μg mL⁻¹ with a good correlation (r² > 0.9930). The limits of detection (LODs) ranged between 0.6 ng mL⁻¹ and 1.2 ng mL⁻¹ for the target analytes. The relative standard deviations (RSDs) of intra-day and inter-day were in the range of 0.64–14.58% and 0.16–15.45%, respectively. This procedure afforded a convenient, sensitive, accurate and cost-saving operation with high extraction efficiency for the model analytes. The method was applied satisfactorily to the determination of salicylates in two environmental waters.