Characterization of reduced iso‐α‐acids derived from hops (Humulus lupulus) by NMR

Reduced forms of iso‐α‐acids (isohumulones), used in modern beer brewing were separated and characterized by ¹H and ¹³C NMR spectroscopy. Components from mixtures of rho‐iso‐α‐acids, tetrahydro‐iso‐α‐acids, and hexahydro‐iso‐α‐acids were isolated using high‐performance liquid chromatography (HPLC) and analyzed by use of one‐ and two‐dimensional NMR experiments. The data presented assign the identities of the main peaks in the HPLC traces for the reduced iso‐α‐acids. Previous tentative assignments regarding the cis and trans configurations and the structures of the acyl residues of the reduced iso‐α‐acids were confirmed and extensive NMR assignments were made. Furthermore, the previously unknown stereochemistry in the C‐4 side‐chain of the rho‐ and hexahydro‐iso‐α‐acids was assigned. Copyright © 2003 John Wiley & Sons, Ltd.     

Two new asterosaponins from the starfish Asterias rubens: application of a cryogenic NMR probe head

We report two new asterosaponins from the Baltic starfish Asterias rubens along with their ¹H and ¹³C NMR data. The compounds were isolated after on‐flow liquid chromatography–NMR–mass spectrometry screening indicated that they had not been identified before. The one‐ and two‐dimensional NMR experiments used to elucidate the structures were recorded using a 5 mm cryogenic probe head. The advantages of cryogenic probes for this kind of examination in comparison with conventional probe heads are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Towards understanding the increase in strength of thermotropic polyesters with heat treatment

Thermotropic copolyester fibers of oxynaphthoate and oxybenzoate have been subjected to conditions that promote solid-state polymerization as well as annealing. The annealing process causes the crystals to perfect with a simultaneous increase in heat of fusion and melting temperature. Solid-state polymerization, a reaction rate-controlled process, causes the polymer viscosity average molecular weight to increase by chain extension from about 14,000 g/mole to more than 87,000 g/mole with a simultaneous impressive increase in tenacity from about 10 g/d (1.2 GPa) to almost 30 g/d (3.7 GPa). To understand the changes in mechanical properties, we have modeled the fiber structure as short rod-like molecules poorly bonded to a continuous matrix of parallel molecules. Lengthening of the reinforcing molecules facilitates better transfer of load from matrix to molecules, resulting in higher tenacity fibers. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Synthesis and orientation study of a magnetically aligned liquid‐crystalline chitin/poly(acrylic acid) composite

A high magnetic field of 5 T was used to fabricate a magnetically aligned, optically anisotropic, liquid‐crystalline chitin/poly(acrylic acid) composite. The aligned mesophase was fixed by photoinitiated free‐radical polymerization. From an examination of polarized optical micrographs and an X‐ray diffraction study, a high degree of orientation of 0.70 was observed for the composite with a higher liquid‐crystalline chitin concentration (10.70 wt %); the orientation was reduced with a decreased chitin concentration at a given acrylic acid concentration. The X‐ray data for the developed composite showed a uniplanar orientation for the chitin crystallites, with its molecular long axes perpendicular to the direction of the magnetic field. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 711–714, 2003     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Microscopic Theory of Blue Phases Ⅰ and Ⅱ of Liquid Crystal

The microscopic theory of the blue phases of chiral liquid crystal is proposed. Beginning with the potential between two molecules, by using the cell model of liquid, applying statistical physical method, the distribution function and the free energy of the system are obtained. By using variational approach and zero-order approximation, the differential equation that the order parameter tensor of the blue phase can satisfy is obtained. Then we change the differential equation to the eigenequation problem in quantum mechanics. Considering the symmetry of the blue phases,the order parameter tensors of blue phases Ⅰ and Ⅱ can be made up of the eigenvectors. Our results are the same as the results of Ginzberg-Landau‘s phenomenological theory. The parameters in the order parameter tensors that we calculate in the located system are close to the predecessors‘ results.     

Thermally stimulated current and DSC studies of the broadened glass transition in liquid crystalline polymers

The high sensitivity of the thermally stimulated current, thermal sampling (TS) method is emphasized in a study of the breadth of the glass transition in several liquid-crystalline polymers (LCPs). Differential scanning calorimetry (DSC) was performed on all samples to further quantify the glass transition regions. For “random” copolyester LCPs with widely varying degrees of crystallinity, including highly amorphous samples, very broad glass tran-sition regions were observed. One semicrystalline alternating copolyester and a series of semicrystalline azomethine LCPs were studied as examples of structurally regular polymers. These exhibited relatively sharp glass transitions more comparable to ordinary isotropic amorphous or semicrystalline polymers. The broad glass transitions in the random copolyesters are attributed to structural heterogeneity of the chains. In one example of a moderate-crystallinity random copolyester LCP (Vectra), glass transitions ranging up to ca. 150°C in breadth were determined by the thermal sampling (TS) method and DSC. In other lower crystallinity copolyester LCPs, the main glass transition temperature as determined by DSC was comparable to that determined by TSC although cooperative relaxations of a minor fraction of the overall relaxing species were detected well below the main T_g, by the TS method and not by DSC. Rapid quenches from the isotropic melt to an isotropic glass were possible with one LCP. The anisotropic and isotropic glassy states for this LCP were found to have the same breadth of the glass transition as was determined by the TS method, although TSC and DSC show that T_g is shifted downward by ca. 15°C in the anisotropic glass as compared to the isotropic glass. © 1993 John Wiley & Sons, Inc.