Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Evaluation of N-Substituted 2,4-Dihydroxyphenylthioamide Fungicide Lipophilicity Using the Chromatographic Techniques HPLC and HPTLC

2,4-Dihydroxyphenylthioamide derivatives modified on the N-aryl ring have substantial fungicidal activity. To determine their quantitative structure–activity relationships their lipophilicity was determined by use of the chromatographic methods column liquid chromatography and thin-layer chromatography. Methanol–water systems were used as mobile phases and the linear dependences of retention (R_M and log k) on volume fraction of organic modifier, φ, were determined. This enabled precise determination of lipophilicity (R_Mw and log k_w) by extrapolation. Correlations were found between quantities characterizing the lipophilicity of the compounds. Deviations enabled discovery of compound structural features which increase or reduce lipophilicity. When these data were correlated with biological activity against the phytopathogenic fungi Alternaria alternata and Botrytis cinerea parabolic dependences were obtained.     

Development and Validation of a High Performance Liquid Chromatographic Method for the Determination of Voriconazole Content in Tablets

This paper describes the validation of an isocratic HPLC method for the assay of voriconazole in tablets. The method employs a Merck LiChrospher^? 100 RP-8 (125 × 4.6 mm I.D., 5 μm particle size) column, with a mobile phase of methanol : triethylamine solutions 0.6 %, pH 6.0 (50:50, v/v) and UV detection at 255 nm. A linear response (r > 0.9999) was observed in the range of 20.0–100.0 μg mL⁻¹. The method showed good recoveries (average 100.4%) and the relative standard deviation intra and inter-day were ≤ 1.0 %. Validation parameters as specificity and robustness were also determined. The method can be used for both quality control assay of voriconazole in tablets and for stability studies as the method separates voriconazole from its degradation products and tablet excipients.     

Simultaneous determination of capecitabine and its metabolite 5-fluorouracil by column switching and liquid chromatographic/tandem mass spectrometry

A liquid chromatographic/tandem mass spectrometric method was developed and validated for the quantitation of capecitabine and its metabolite 5-fluorouracil in human plasma. The simultaneous determination of both analytes was achieved by a column switching method using a trapping column and two analytical columns with different stationary phases. Isocratic elution was used for the separation of capecitabine on a C18 column whereas 5-fluorouracil was separated using gradient elution on an non-polar carbon phase. The calibration curves were linear for both compounds with a correlation factor (R2) > 0.9993 for 5-fluorouracil and >0.9942 for capecitabine. The assay was validated in the concentration range 5.00-1000 ng ml(-1) for both compounds. The intra-day precision was better than 10% for 5-fluorouracil and better than 11% for capecitabine whereas the inter-day precision was better than 8% for 5-fluorouracil and better than 14% for capecitabine.     

An efficient procedure for protection of carbonyls in Brønsted acidic ionic liquid [Hmim]BF4

Protection of carbonyls as acetals or ketals using Brønsted acidic ionic liquid [Hmim]BF₄ as catalyst as well as solvent was investigated. Satisfactory results were obtained for the protection of carbonyls as cycloacetals or ketals with diols. The product can be separated conveniently from the reaction system, and the ionic liquid can be reused after removal of water.     

Evaluation of an on-line coupled continuous flow liquid membrane extraction and precolumn system as trace enrichment technique by liquid chromatographic determination of bisphenol A

An on-line coupled continuous flow liquid membrane extraction (CFLME) and C₁₈ precolumn system was developed for sample preconcentration in liquid chromatography determination. After preconcentration by CFLME, which is based on the combination of continuous flow liquid–liquid extraction and supported liquid membrane, bisphenol A (BPA) was enriched in 960 μl of 1 mol l⁻¹ NaOH used as acceptor. This acceptor was on-line neutralized and transported onto the C₁₈ precolumn where analytes were absorbed and focused. Then the focused analytes were injected onto a C₁₈ analytical column for separation and detected at 220 nm with a diode array detector. CFLME related parameters such as flow rates, pH of donor and acceptor, and enrichment time were optimized. The proposed method presents a detection limit of 0.03 μg l⁻¹ (S/N=3) when 60 ml samples was enriched with an enrichment time of 30 min. Compared with C₁₈ based column-switching procedure, this proposed procedure presents similar sample throughput and lower detection limits. The proposed method was successfully applied to determine BPA in tap water, river water, and municipal sewage effluent samples.     

Reversed Capillary Electrochromatography: Investigation of Peak Symmetry for Eluting Curves of Solutes

Summary A clean method without use of organic solvents has been developed for isolation and high-performance liquid chromatographic (HPLC) determination of oxytetracycline (OTC) and sulphadimidine (SDD) in cow's milk. Isolation is rapid and simple—homogenization with an inorganic acid solution by means of a handy ultrasonic homogenizer, which is easy-to-use and portable, followed by centrifugation. Reversed-phase HPLC was performed on a C₄ column, with 1.25 mmol L⁻¹ succinic acid solution as mobile phase, and identification was by means of a photodiode-array detector. Separation of the analytes was achieved in less than 8 min. Significant linearity was established over the concentration range of 0.1–1.0 μg mL⁻¹ for both target compounds (r>0.99,P<0.01). Average recoveries of OTC and SDD (each spiked at 0.1–1.0 μg mL⁻¹) were ≥88.8, and inter- and intra-assay variability was ≤2.8%. The total time required for analysis of one sample was <20 min. The limits of quantitation of the method (μg mL⁻¹ in milk) were 0.044 for OTC and 0.023 for SDD. No organic solvent was used at any stage of the analysis.     

A new diphenylphosphinite ionic liquid (IL-OPPh2) as reagent and solvent for highly selective bromination, thiocyanation or isothiocyanation of alcohols and trimethylsilyl and tetrahydropyranyl ethers

A new diphenylphosphinite ionic liquid (IL-OPPh₂) is introduced. This ionic liquid is used as both a reagent and a solvent to convert alcohols and trimethylsilyl and tetrahydropyranyl (THP) ethers into their corresponding alkyl bromides, thiocyanates or isothiocyanates in the presence of Br₂ and SCN⁻ at 80 °C. In this ionic liquid, bromination and thiocyanation of alcohols occurs highly selectively in the presence of trimethylsilyl and THP-ethers and also between different classes of alcohols. The use of this ionic liquid allows easy separation of the desired products from the phosphinate by-product.     

新型无毒离子液体催化“一锅煮”合成3,4-二氢嘧啶-2(1H)-酮

利用新型无毒离子液体(BMImSac)作催化剂, 芳香醛、1, 3-二羰基化合物和尿素或硫脲三组分“一锅煮”合成了3,4-二氢嘧啶-2(1H)-酮. 与传统方法相比, 该法是一种操作简单、产率高、用时少的环境友好方法.     

Excess Molar Volumes and Liquid–Liquid Equilibria of the Ionic Liquid 1-Methyl-3Octyl-Imidazolium Tetrafluoroborate Mixed with Butan-1-ol and Pentan-1-ol

Experimental densities were measured for the system 1-methyl-3-octyl-imidazolium tetrafluoroborate [OMIM][BF₄] + butan-1-ol, + pentan-1-ol at 298.15 K and ambient pressure using a vibrating tube densimeter, taking into account the influence of the viscosity correction. Excess molar volumes V^E have been determined. V^E is quite small and negative in the alcohol-rich range of the mixture composition and positive in the alcohol-poor range. LLE data of [OMIM][BF₄] + pentan-1-ol have been measured using a laser light scattering cell for detecting cloud points at different compositions in the temperature range of 282–292 K. A miscibility gap with an upper critical solution temperature (UCST) of 292 K has been found.