Enantioseparation of Amino Acid Derivatives with a Cellulose-Based Chiral Stationary Phase

Five structurally related amino acid derivatives were enantioseparated by HPLC with a commercially available chiral stationary phase, Chiralcel OD-H. The chromatographic experiments were performed in the normal phase mode. n-Hexane/polar alcohol was used as mobile phase. Excellent baseline enantioseparations could be obtained for all these solutes. The effects of the concentration of polar alcohol and the column temperature on the retentions and enantioseparations were studied in detail. From the van't Hoff plots the corresponding apparent thermodynamic parameters were derived. Mechanism aspects of chiral recognition were discussed based on the relationship between the thermodynamic parameters and the structures of the solutes. It was found that the substituent of the phenyl group on the residual group of the amino acid derivatives was close relevant to thermodynamic origin of enantioseparation. Much better enthalpy–entropy compensation effect was obtained by plotting the differential, rather than the original, thermodynamic parameters.     

HPLC Determination and Pharmacokinetic Study of Valdecoxib in Human Plasma

A sensitive, simple, and accurate high-performance liquid chromatographic method has been developed for determination of valdecoxib and the internal standard rofecoxib in human plasma. Protein was precipitated from plasma samples by addition of perchloric acid (HClO₄); the drug was then extracted with diethyl ether. Separation was performed on a Cosmosil C₁₈ column (150 mm × 4.6 mm i.d., 5 m particles) with ammonium acetate buffer-acetonitrile, 60:40 (v/v), containing 0.1% TEA, pH 6.5, as mobile phase. Detection and quantification were performed by UV-visible detection at 239 nm. Detection and quantification limits were 3 and 5 ng mL^–1, respectively. The linear concentration range for valdecoxib was 5–400 ng mL^–1. The validated RP HPLC method was used for determination of the pharmacokinetic data for the drug in humans.     

Isotope dilution determination of polycyclic aromatic hydrocarbons in olive pomace oil by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometry detection (MS) for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in olive pomace oil has been developed. The oil was diluted with n-pentane and extracted by liquid-liquid partition with dimethyl sulphoxide (DMSO). After water addition and back-extraction with cyclohexane, a thin-layer chromatography on silica gel was performed as a further purification step. The PAHs spot was scraped off from the plate and the final extract was concentrated and analysed by GC-MS in full scan mode. The eight PAHs under investigation were determined in the presence of the corresponding labelled compounds added as internal standards to the sample at the beginning of the analytical process. The identified PAHs were then quantified by the isotope dilution methodology assuring the compensation of the concentration of each analyte for any variation in the sample preparation. The method precision was satisfactory with relative standard deviation (R.S.D.) values in the range 3.6-12.7% for all PAHs. The average recovery rates ranged from 69.0 to 97.5%. Accuracy was also calculated for benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene by analysing a certified reference material (CRM 458, coconut oil) with adequate results. All response curves exhibited a linear fit from 0.1 to 10 microg ml(-1) and the determination coefficients R2 were better than 0.9942. The limits of detection (0.1-0.4 microg kg(-1)) were acceptable when compared with the maximum permitted limit of 2 microg kg(-1) for each of the eight considered PAHs and 5 microg kg(-1) for the sum of the eight PAHs established by the Italian legislation. Measurement uncertainty was finally calculated identifying and quantifying the uncertainty components of the analytical process. The relative expanded uncertainties (Uc), expressed as percent values were in the range 8.5-11.4% thus appropriate for residues quantification in the range of concentrations considered in the present study.     

High-performance liquid chromatography of some basic drugs on a n-octadecylphosphonic acid modified magnesia-zirconia stationary phase

The high-performance liquid chromatographic behavior of some basic drugs was studied on a n-octadecylphosphonic acid modified magnesia-zirconia (C18PZM) stationary phase. The effect of mobile phase variables such as methanol content, ionic strength, and pH on their chromatographic behavior was investigated. The retention mechanism of basic drugs on the stationary phase was elucidated. The results indicate that both hydrophobic and cation-exchange interactions contribute to solute retention under most chromatographic conditions. The inherent Br?nsted-acid sites and also the adsorbed Lewis base anionic buffer constituents on accessible ZM surface Lewis acid sites play a role in the retention of ionized solutes by cation-exchange interaction. However, especially at high mobile phase pH, the retention of basic drugs depends mainly on hydrophobic interactions between solutes and support. Separations of the basic drugs on the C18PZM phase by a predominantly reversed-phase retention mode were very promising. The mixed-mode retention feature on this phase, as a result of the adsorbed Lewis base anionic buffer constituents acting as sites for cation-exchange, could also be very useful, e.g. for enhancing the chromatographic selectivity of such analytes. The C18PZM seems to be an excellent alternative to silica-based reversed-phase stationary phase for the separation of strongly basic solutes.     

Determination of caffeoylquinic acids and flavonoids inCynara scolymus L. by high performance liquid chromatography

Summary The main phenolic compounds in dried extracts fromCynara scolymus (artichoke)—monocaffeoylquinic acids, dicaffeoylquinic acid, and flavonoids–have been separated by high-performance liquid chromatography. By use of a narrow bore C₁₈ column and an acidic mobile phase this HPLC method enabled improved separation within 31 min with significantly reduced solvent consumption compared with other methods. The method was validated to demonstrate its linearity, precision, accuracy, and robustness. Twelve commercial samples were analyzed. Monocaffeoylquinic acids were the most abundant phenolic compounds; the amounts present ranged from 0.48 to 4.24%. The amounts of dicaffeoylquinic acids and flavonoids were smaller—from 0.03 to 0.52%. The method is a good combination of efficiency and economy and should be especially useful for commercial applications.     

Composition of 2-(3,5-dibromo-2-pyridylazo) diethylaminophenol chelates by liquid chromatography

Summary The composition of 3,5-diBr-PADAP metal chelates was determined by liquid chromatography employing appropriate eluents and non-polar bonded stationary phase. The metal-to-ligand ratios were 12, 12 and 12 for Cu(II), Co(III) and Cr(III) respectively, and the V(V)-to-ligand ratio found to be 111 in V(V)-3,5-diBr-PADAP-H₂O₂ in the presence of H₂O₂. The results are in agreement with literature data.     

Individual determination of ortho and non-ortho substituted polychlorobiphenyls (PCBs) in sediments by high performance liquid chromatographic pre-separation and gas chromatography/ECD detection

Summary An analytical procedure for the individual determination of ortho and non-ortho PCB congeners in sediments, using high performance liquid chromatography (HPLC) preseparation and gas chromatography/ECD detection, is described. Gas chromatography/FTIR spectrometry (GC/FTIR) and gas chromatography/mass spectrometry (GC/MS) were employed for individual congener identification and determination. Sample extraction, clean-up of extract and selective elution procedures were optimized by using reference certified marine sediment samples. Recovery and precision were typically 83% and 16% respectively at 2 ng/g of total PCB content. The proposed procedure, tested by analyzing real sediment samples, showed a reproducibility better than 20% at 13 ng/g PCB level.     

直链醇链长对层状液晶结构与稳定性的影响

作为助表面活性剂,直链醇在层状溶致液晶的制备中是非常重要的。本文以层状液晶的相行为和小角度X射线衍射测量,研究了直链醇链长对层状液晶结构与稳定的影响。     

Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.     

Synthesis of tert-butyl-substituted poly (ether ketone) by nickel-catalyzed coupling polymerization of aromatic dichloride

tert-Butyl substituted poly (aryl ether ketone)s with relatively high molecular weights were prepared by the Ni-catalyzed polymerization of tert-butyl substituted aromatic dichlorides containing ether ketone unit. These polymers were amorphous and soluble in common organic solvents, such as THF, dichloromethane, and chloroform. De-tert-butylation of the polymer by the treatment of trifluoromethanesulfonic acid in the presence of toluene proceeded smoothly and produced crystalline poly (aryl ether ketone). © 1994 John Wiley & Sons, Inc.