Localized bifurcations and defect instabilities in the convection of a nematic liquid crystal

The stationary and the time-dependent homogeneous ordered states in convection may both become unstable against localized perturbations. Defects are then created and they may contribute to the disorganization of the homogeneous state. We present an experimental study of defects in some homogeneous stationary structures as well as in the traveling-wave states of convection of a nematic liquid crystal. We show that the core of the defects is a germ of the unstable state and it can become unstable under the external stress. Then, either fully homogeneous states with the symmetry of the core, or complex disordered states can develop from the local instability of defects in processes quite similar to displacive transitions in solids. Some of the main features are qualitatively similar to numerical simulations of an appropriate Landau-Ginzburg equation.     

利用有效液滴模型对超重元素α衰变半衰期的研究

利用有效液滴模型计算了偶偶超重核的α衰变半衰期,计算过程中采用了保持碎片体积守恒的不对称形状描述以及有效惯性系数计算Gamow势垒穿透因子.首先在质子数Z为88—98的区域检验了有效液滴模型,发现计算结果与实验符合得比较好.随后将此模型推广到Z≥100的情况,虽然只用了两个模型参数,计算结果与实验数据符合,说明有效液滴模型是计算偶偶超重核素α衰变半衰期的一个成功模型.     

Tunable properties of light propagation in photonic liquid crystal fibers

Tunable properties of light propagation in photonic crystal fibers filled with liquid crystals, called photonic liquid crystal fibers (PLCFs) are presented. The propagation properties of PLCFs strongly depend on contrast between refractive indices of the solid core (pure silica glass) and liquid crystals (LCs) filing the holes of the fiber. Due to relatively strong thermo-optical effect, we can change the refractive index of the LC by changing its temperature. Numerical analysis of light propagation in PLCF, based on two simulation methods, such as finite difference (FD) and multipole method (MM) is presented. The numerical results obtained are in good agreement with our earlier experimental results presented elsewhere [1].     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

New HPLC-chiral stationary phases for enantiomeric resolution of sulfoxides and selenoxides

Summary Enantiomers of several sulfoxides and some selenoxides can be easily separated by using a new chiral stationary phase (CSP-DACH-DNB) containing the 3,5-dinitrobenzoyl derivative of R,R-(-)1,2-diamino-cyclohexane as selector, covalently bonded to the siliceous matrix. The easy operative conditions and the high enantioselectivity values (α) allow a direct transfer of the analytical separations to a semi-preparative and preparative scale.     

Curved Ferroelectric Liquid Crystal Matrix Displays Driven by Field-Sequential-Color and Active-Matrix Techniques

This paper describes a curved field-sequential-color matrix display using fast-response ferroelectric liquid crystal. Black matrix and transparent electrode patterns were formed on a thin plastic substrate by a transfer method from a glass substrate. While a composite film of liquid crystal and micro-polymers of walls and fibers was formed between the flexible substrates by printing, laminating and curing processes of a solution of monomers and liquid crystal, the mechanical stability was enhanced by use of multi-functional monomers to form large display panels. The image pixels of the matrix panel were driven by an active matrix scheme using an external switch transistor array at a frequency of 180 Hz for intermittent three-primary-color backlight illumination. The flexible A4-paper-sized color display with 24 × 16 pixels and 60 Hz field frequency was demonstrated by illuminating it with sequential three-primary-color lights from light-emitting diodes of the backlight. Our display system is useful in various information displays because of its freedom of setting and location.     

Reintroduced solids increase inhibitor levels in a pretreated corn stover hydrolysate

Following detoxification of the liquid hydrolysate produced in a corn stover pretreatment process, inhibitor levels are seen to increase with the re-addition of solids for the ensuing hydrolysis and fermentation processes. The solids that were separated from the slurry before detoxification of the liquor contain approx 60% (w/w) moisture, and contamination occurs owing to the diffusion of inhibitors from the moisture entrained in the porous structure of the corn stover solids into the bulk fluid. This evidence suggests the need for additional separation and detoxification steps to purge residual inhibitors entrained in the moisture in the solids. An overliming process to remove furans from the hydrolysate failed to reduce total organic acids concentration, so acids were removed by treatment with an activated carbon powder. Smaller carbon doses proved more efficient in removing organic acids in terms of grams of acid removed per gram of carbon powder. Sugar adsorption by the activated carbon powder was minimal.     

Characterisation of the photocatalyst Pilkington Activ™: a reference film photocatalyst?

Pilkington Glass Activ™ represents a possible suitable successor to P25 TiO₂, especially as a benchmark photocatalyst film for comparing other photocatalyst or PSH self-cleaning films. Activ™ is a glass product with a clear, colourless, effectively invisible, photocatalytic coating of titania that also exhibits PSH. Although not as active as a film of P25 TiO₂, Activ™ vastly superior mechanical stability, very reproducible activity and widespread commercial availability makes it highly attractive as a reference photocatalytic film. The photocatalytic and photo-induced superhydrophilitic (PSH) properties of Activ™ are studied in some detail and the results reported. Thus, the kinetics of stearic acid destruction (a 10⁴ electron process) are zero order over the stearic acid range 4–129 monolayers and exhibit formal quantum efficiencies (FQE) of 0.7×10⁻⁵ and 10.2×10⁻⁵ molecules per photon when irradiated with light of 365±20 and 254 nm, respectively; the latter appears also to be the quantum yield for Activ™ at 254 nm. The kinetics of stearic acid destruction exhibit Langmuir–Hinshelwood-like saturation type kinetics as a function of oxygen partial pressure, with no destruction occurring in the absence of oxygen and the rate of destruction appearing the same in air and oxygen atmospheres. Further kinetic work revealed a Langmuir adsorption type constant for oxygen of 0.45±0.16 kPa⁻¹ and an activation energy of 19±1 kJ mol⁻¹. A study of the PSH properties of Activ™ reveals a high water contact angle (67°) before ultra-bandgap irradiation reduced to 0° after prolonged irradiation. The kinetics of PSH are similar to those reported by others for sol–gel films using a low level of UV light. The kinetics of contact angle recovery in the dark appear monophasic and different to the biphasic kinetics reported recently by others for sol–gel films [J. Phys. Chem. B 107 (2003) 1028]. Overall, Activ™ appears a very suitable reference material for semiconductor film photocatalysis.     

改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶 凝胶法以磷钼酸 (MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2 催化剂 .使用ICP、XRD、TG DTA、IR、TPD MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能 .杂多钼酸盐与TiO2 通过O2 -在TiO2 表面发生了键合 .在 6 2 3K下 ,杂多阴离子仍保持原有的Keggin结构 .CO2 在Lewis酸位Ni(Ⅱ )和Lewis碱位Ni-O -Mo的桥氧协同作用下生成CO2 卧式吸附态Ni(Ⅱ )←O - (CO)← (O--Ni) .丙烯有多种吸附态在催化剂上吸附 .在 5 6 3K、1MPa和空速 15 0 0h-1的反应条件下 ,丙烯的摩尔转化率为 3.2 % ,产物MAA选择性为 95 % .