Dynamic Light Scattering Studies on Crystallization of Isotactic Polystyrene from Dilute Solutions at High Supercoolings

Crystallization of isotactic polystyrene (it‐PS) from dilute solution at high supercooling has been investigated by dynamic light scattering (DLS). We successfully obtained simultaneously, in situ in solutions, the time developments of both random coils of it‐PS molecules and the growing crystals. The size of coils remains constant during growth, while the crystals pass through two stages, that is, an induction period at the early stage with very slow growth rates and a subsequent linear growth stage. It is confirmed that the temperature dependence of the linear growth rates, determined by DLS, agree well with that determined by electron microscopy. The temperature dependences of the growth rate and the inverse of induction time are dependent on the viscosity of solvent, which indicates that all dynamics are dominated by the segmental motion of polymer chains in solution at high supercoolings (low temperatures). Two possibilities are proposed for the induction period.     

Investigation of Carbon Black Network in Natural Rubber with Different Bound Rubber Contents

A new method was applied to modify the surface activity of virginal carbon black (VCB). LA‐57, one kind of hindered amine light stabilizer, was adsorbed onto the carbon black surface through a strong shear force induced by the screws of a HAAKE internal mixer. The modified carbon black (MCB) was characterized by FT‐IR and thermogravimetric analysis (TGA). The bound rubber content of the natural rubber (NR) compounded with MCB and VCB varied with the fraction of LA‐57 on the MCB surface. The nonlinear effect at small strains, generally referred as the Payne effect, was investigated in the rubber compounds based on the different bound rubber contents. The NR compound containing the lowest bound rubber content had an obvious Payne effect. Based on the bound rubber content, the types of filler network varied from direct contact mode to the joint rubber shell mechanism.     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Influence of Thermal Treatment on the Thermal Behavior of Poly‐L‐lactide

The influences of thermal treatment on cold crystallization and the thermal behavior of poly‐L‐lactide (PLLA) were investigated by DSC and polarizing microscopy. Both the cooling and heating rates had effects on cold crystallization. Double peaks were observed for the samples on subsequently heating at 10°C min^?1 after cooling between 5 and 20°C min^?1. The degrees of crystallinity dramatically increased with decreasing cooling rate, and the size of PLLA spherulites increased with a decrease in the cooling rate. Double cold crystallization peaks were also observed during heating traces at higher rates for this material after fast cooling (20°C min^?1) from the melt. The competition between the crystallization from the nuclei formed during cooling, and that from spontaneous nucleation might be responsible for the appearance of double peaks.     

Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

The metamaterial analogue of electromagnetically induced transparency by dual-mode excitation of a symmetric resonator

Electromagnetically induced transparency （EIT） is obtained in a symmetric U-shaped metamaterial, which is at- tributed to the simultaneously excited dual modes in a single resonator under lateral incidence. A large group index accom- panied with a sharp EIT-like transparency window offers potential applications for slowing down light and sensing.     

Performance enhancement of an InGaN light-emitting diode with an AIGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode （LED） with an A1GaN/InGaN superlattice （SL） electron-blocking layer （EBL） is studied numerically, which involves the light-current performance curve, internal quan- tum efficiency electrostatic field band wavefunction, energy band diagram carrier concentration, electron current density, and radiative recombination rate. The simulation results indicate that the LED with an A1GaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular A1GaN EBL or a normal A1GaN/GaN SL EBL because of the appropriately modified energy band diagram, which is favorable ibr the injection of holes and confinement of elec- trons. Additionally, the efficiency droop of the LED with an AIGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

基于新型电荷生成层的P-i-N结构白色有机叠层电致发光器件

采用2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline(BCP): 5 wt.% cesium carbonate(Cs₂CO₃)和N, N'-Bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine(NPB): 20 wt.% molybdenum oxide(MoO₃)分别作为器件的电子注入层和空穴注入层,研究了N型和P-i-N结构有机电致发光器件的载流子传输特性.载流子传输层中BCP: Cs₂CO₃和NPB:MoO₃的引入有效增强了载流子注入能力,从而降低了器件的驱动电压.基于新型电荷生成层BCP: 5 wt.% Cs₂CO₃/ NPB: 20 wt.% MoO₃制备了色稳定、高效率P-i-N结构有机叠层器件.与单元器件相比,引入新电荷生成层有机叠层器件的最大电流效率增大了2.5倍,表明该电荷生成层可以有效地将电子和空穴分别注入到相邻发光单元中.采用该电荷生成层制备了P-i-N结构白色有机叠层器件,器件的上下发光单元分别为橙光和蓝光发射.当发光亮度从500增加到5 000 cd/m²时,器件的色坐标稳定在(0.33, 0.29)附近,接近白光等能点.利用单色发光单元堆叠制备白色有机叠层器件的方法为实现色稳定、高效率的白色有机电致发光器件提供了一种有效的途径.     

利用低相干光纤动态光散射法测量浓悬浮液中多分散颗粒粒径分布

本文针对高浓度散射介质,用低相干光纤动态光散射技术测量浓悬浮液中多分散颗粒系的粒径及其粒径分布。利用迭代CONTIN算法对实验数据进行反演运算,得到多分散颗粒系的粒径分布结果。结果表明,浓悬浮液中多分散颗粒系的峰值粒径测量值与给定的两种标准粒径值相吻合,其误差在4%之内,粒径分布曲线中各散射颗粒所反映的散射体光强分布与根据Mie散射计算得到的理论值相吻合。实验结果证明低相干光纤动态光散射实验系统能准确测量浓悬浮液中多分散颗粒粒径及粒径分布。     

Efficiency and droop improvement in a blue InGaN-based light emitting diode with a p-InGaN layer inserted in the GaN barriers

The advantages of a blue InGaN-based light-emitting diode with a p-InGaN layer inserted in the GaN barriers is studied. The carrier concentration in the quantum well, radiative recombination rate in the active region, output power, and internal quantum efficiency are investigated. The simulation results show that the InGaN-based light-emitting diode with a p-InGaN layer inserted in the barriers has better performance over its conventional counterpart and the light emitting diode with p-GaN inserted in the barriers. The improvement is due to enhanced Mg acceptor activation and enhanced hole injection into the quantum wells.