Изотопные мишени для ядерных исследований

A non-contact measuring method on electrostatic potential by using α-ray ionization is proposed. In this method potential of a charged material is estimated from ionic current flowing through an ion collector attached with a small ²⁴¹Am source. As hade electrode surrounding the collector has a function of adjusting sensitivity and potential up to 50 kV was measured with precision of 1 kV.     

Determination of Cadmium and Lead in Sea Water after Extraction Using Electrothermal Atomisation. Minimisation of Interferences from Co-Extracted Sea Salts

Abstract

Interferences from small amounts of sea salt in the determination of cadmium and lead were investigated. Test samples were made to mimic solutions obtained after extraction of sea water for trace metal analysis. Sea salt concentrations in the range 0–400 mg/l were investigated. Background absorption from this salt was high but easily minimised through the addition of nitric acid (2 % v/v). Sensitivity reductions due to the salt were considerable and varied from one graphite tube to the other. This problem was overcome by the addition of 1000 mg lanthanum per litre of sample. The positive effect of the lanthanum matrix modification is thought to be due to a change of the graphite tube surface.     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

低于13K的单级脉管制冷机性能研究

回热器是脉管制冷机的关键部件之一,其效率对脉管制冷机性能有很大影响。铅丸是常见的蓄冷材料,通常用于回热器的低温端。本文测试和分析了不同品质的国产铅丸和进口铅丸对单级G-M型脉管制冷机性能的影响。采用额定功率为6．0 kW的压缩机驱动,使用进口铅丸脉管制冷机最低制冷温度达12．9 K,这是当前单级脉管制冷机达到的最低制冷温度;40 K时的最大制冷量为57．4 W。使用国产铅丸最低制冷温度为13．6 K,40 K时的最大制冷量为55．9 W。本文对低温制冷机蓄冷材料选择具有一定的参考价值。     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

Effect of corona discharge on cadmium sulphide and lead sulphide films

This paper describes the effect of corona discharge on cadmium sulphide (CdS) and lead sulphide (PbS) films prepared using the chemical route. The property of films before and after exposure to corona has been described in detail. The electronic properties of the CdS and PbS films have been studied by current-voltage (I-V), capacitance-voltage (C-V) measurements. The structural properties and surface morphology were studied by using X-ray diffraction and scanning electron microscopy before and after exposing to Corona discharge. The films displayed the change in surface morphology after exposure to the corona discharge. It has been found that the films showed an increase in resistivity after exposure. This change in property has been attributed to modification in surface states. Time-dependent recovery indicated that room temperature annealing is sufficient to regain the normal resistivity of the films. The experiment was carried with the aim of studying the effect of the interaction of corona discharge on the semiconductor films and its subsequent effects.     

ITER高温超导电流引线的高安全分流器研究

电流引线是室温电源电缆与低温磁体之间的电连接部件.高温超导材料在液氮温度下具有零电阻率和低热导率的特性,用它做成的电流引线可以大大减小低温系统的热负荷,从而减少制冷设备投资及系统运行费.高温超导电流引线可以分为阻性换热器段和高温超导段两部分(其中还包括各部件间的连接部分).高温超导段的分流器设计关系到冷端热负荷大小以及超导段失超后的安全问题.为了研究国际热核聚变试验堆(ITER)电流引线高安全性能,专门设计、试验了68kA引线的1/90实验样品.本文通过对比全CuBe(cu-2%Be)分流器、全不锈钢分流器和二元分流器的失冷故障(LOFA)实验结果,证明二元分流器能够克服安全性和冷端漏热矛盾,可以满足ITER高安全性的要求.     

Two-storage inventory model with lot-size dependent fuzzy lead-time under possibility constraints via genetic algorithm

Multi-item inventory models with stock dependent demand and two storage facilities are developed in a fuzzy environment where processing time of each unit is fuzzy and the processing time of a lot is correlated with its size. These are order-quantity reorder-point models with back-ordering if required. Here possibility and crisp constraints on investment and capacity of the small storehouse respectively are considered. The models are formulated as fuzzy chance constrained programming problem and is solved via generalized reduced gradient (GRG) technique when crisp equivalent of the constraints are available. A genetic algorithm (GA) is developed based on fuzzy simulation and entropy where region of search space gradually decreases to a small neighborhood of the optima and it is used to solve the models whenever the equivalent crisp form of the constraint is not available. The models are illustrated with some numerical examples and some sensitivity analyses have been done. For some particular cases results observed via GRG and GA are compared.     

Discovery of a herbicidal lead using polymer-bound activated esters in generating a combinatorial library of amides and esters

Summary A combinatorial library containing mixtures of amides and esters was prepared through solid-phase chemistry. The advantages of using solid-phase chemistry over solution-phase chemistry to prepare this library are discussed. The library was screened through a high-throughput whole organism herbicidal assay upon which a mixture containing amides was found to have herbicidal activity. Deconvolution of the mixture providedN-(3-benzoylphenyl)-3-(1,1-dimethylethyl)-1-methyl)-1H-pyrazole-5-carboxamide as a herbicidal lead with broadleaf and narrowleaf pre-emergence herbicidal activity as low as 100 g/ha on some weed species. This study represents the first report of an agrochemical discovered using a combinatorial approach. Supplementary Material, comprising experimental procedures for the preparation of resin II and the reaction of II with nucleophiles, GC/MS and LC/MS data for the reaction ofII with morpholine, and a detailed experimental for the preparation of 2 with characterization data, is available upon request.