300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

High pressure raman scattering in Pb5Ge3O11

The pressure dependence of various phonon modes has been investigated through the ferro-paraelectric phase transition. Most mode frequencies harden before levelling off above the phase transition. Mode Grüneisen parameters are estimated from the pressure dependence of phonon frequencies.     

液态铅的电阻率

采用精确的结构因数实验数据和Ｂｅｈａｖｉ模型赝势，用Ｚｉｍａｎ理论计算了液态铅的电阻率．计算结果和实验数据符合很好．讨论了Ｚｉｍａｎ理论对液态铅的适用性以及适合于液态铅的赝势的特征．     

Recent study of nanomaterials prepared by inert gas condensation using ultra high vacuum chamber

The ultra high vacuum chamber was developed in the Department of Nuclear Physics, University of Madras with the funding from DST, India. This UHV chamber is used to prepare nanocrystalline materials by inert gas condensation technique (IGCT). Nanocrystalline materials such as PbF₂, Mn²⁺-doped PbF₂, Sn-doped In₂O₃ (ITO), ZnO, Al₂O₃, Ag₂O, CdO, CuO, ZnSe:ZnO etc., were prepared by this technique and characterized. Results of some of these materials will be presented in this paper. In solid-state²⁰⁷Pb NMR on PbF₂ a separate signal due to the presence of grain boundary has been observed. The structural phase transition pressure during the phase transformation from the cubic phase to orthorhombic phase under high pressure shows an increase with the decrease in grain size. Presence of electronic centres in nanocrystalline PbF₂ is observed from Raman studies and the same has been confirmed by photoluminescence studies. Al₂O₃ was prepared and⁵⁶Fe ions were implanted. After implantation segregation of⁵⁶Fe ions was examined by SEM. The oxidation properties of ITO were studied by HRTEM. As against the expectation of oxide coating on individual nanograins of In-Sn alloy, ITO nanograins grew into faceted nanograins on heat treatment in air and O₂ atmosphere. The growth of ITO under O₂ atmosphere showed pentagon symmetry. The PMN was initially prepared by solid-state reaction. Further, this PMN relaxor material will be used to convert into nanocrystalline PMN by IGCT with sputtering and will be studied     

Effect of corona discharge on cadmium sulphide and lead sulphide films

This paper describes the effect of corona discharge on cadmium sulphide (CdS) and lead sulphide (PbS) films prepared using the chemical route. The property of films before and after exposure to corona has been described in detail. The electronic properties of the CdS and PbS films have been studied by current-voltage (I-V), capacitance-voltage (C-V) measurements. The structural properties and surface morphology were studied by using X-ray diffraction and scanning electron microscopy before and after exposing to Corona discharge. The films displayed the change in surface morphology after exposure to the corona discharge. It has been found that the films showed an increase in resistivity after exposure. This change in property has been attributed to modification in surface states. Time-dependent recovery indicated that room temperature annealing is sufficient to regain the normal resistivity of the films. The experiment was carried with the aim of studying the effect of the interaction of corona discharge on the semiconductor films and its subsequent effects.     

A novel surface cleaning method for chemical removal of fouling lead layer from chromium surfaces

Most products especially metallic surfaces require cleaning treatment to remove surface contaminations that remain after processing or usage. Lead fouling is a general problem which arises from lead fouling on the chromium surfaces of bores and other interior parts of systems which have interaction with metallic lead in high temperatures and pressures. In this study, a novel chemical solution was introduced as a cleaner reagent for removing metallic lead pollution, as a fouling metal, from chromium surfaces. The cleaner aqueous solution contains hydrogen peroxide (H₂O₂) as oxidizing agent of lead layer on the chromium surface and acetic acid (CH₃COOH) as chelating agent of lead ions. The effect of some experimental parameters such as acetic acid concentration, hydrogen peroxide concentration and temperature of the cleaner solution during the operation on the efficiency of lead cleaning procedure was investigated. The results of scanning electron microscopy (SEM) showed that using this procedure, the lead pollution layer could be completely removed from real chromium surfaces without corrosion of the original surface. Finally, the optimum conditions for the complete and fast removing of lead pollution layer from chromium surfaces were proposed. The experimental results showed that at the optimum condition (acetic acid concentration 28% (V/V), hydrogen peroxide 8% (V/V) and temperature 35 °C), only 15-min time is needed for complete removal of 3 g fouling lead from a chromium surface.     

Изотопные мишени для ядерных исследований

A non-contact measuring method on electrostatic potential by using α-ray ionization is proposed. In this method potential of a charged material is estimated from ionic current flowing through an ion collector attached with a small ²⁴¹Am source. As hade electrode surrounding the collector has a function of adjusting sensitivity and potential up to 50 kV was measured with precision of 1 kV.     

重金属铅离子胁迫下玉米叶片光谱弱差信息的DSAT甄别模型

光谱间微弱信息测度是当今高光谱遥感研究难点之一,传统光谱测度方法难以区分光谱信息的微弱差异。研究设计了不同浓度的铅(Pb)污染实验,并测量了不同浓度铅离子(Pb2+)胁迫下玉米叶片的高光谱反射率、叶绿素含量及Pb2+含量,但是从所测结果得出,不同浓度Pb2+胁迫下的光谱相似性相关系数均达到0.999,难以区分不同浓度Pb2+胁迫引发的光谱间微弱信息差异和污染程度。针对这一情况,基于光谱微分处理、正切函数增强、光谱角量度与波谱分段检测等,提出了一种新型的相似光谱测度方法,即微分光谱角正切(derivative spectral angle tangent,DSAT)法。为了验证DSAT在区分相关系数达0.99以上相似光谱的可行性和有效性,将DSAT用于不同浓度Pb2+胁迫玉米叶片的整体波形与光谱区间子波形的信息差异性度量与检测。实验结果得到,波形差异信息与玉米叶片中叶绿素相对浓度与Pb2+含量显著相关。进而也证明DSAT法在甄别较高相似性光谱间差异上具有更好的实用性和优越性。     

Current leads for superconducting magnets of ADS injector I

In an ADS injector i, there are five superconducting magnets in each cryomodule. Each superconducting magnet contains a solenoid magnet, a horizontal dipole corrector （HDC）, and a vertical dipole corrector （VDC）. Six current leads will tm required to power the electrical circuits, from room temperature to the 2.1 K liquid helium bath： two leads carry 100 A current for the solenoid magnet while the other four carry 12 A for the HDC and the VDC. This paper presents the principle of current lead optimization, which includes the cooling methods, the choice of material and structure, and the issues for current lead integration.     

电感耦合等离子体原子发射光谱法(ICP-AES)测定粗铅中的Cu，As，Sb，Bi 4种元素

建立了电感耦合等离子体原子发射光谱法（ICP-AES）测定粗铅中Cu,As,Sb,Bi 4种元素的定量分析方法。通过实验选择327.395,193.696,187.052,223.061nm分别作为Cu,As,Sb,Bi的分析谱线,方法的检出限均小于0.010μg/mL。方法的回收率在96%~104%,精密度实验结果表明,相对标准偏差（RSD,n=6）均小于3%,能满足日常分析对粗铅中杂质元素的快速检测要求。