The role of proficiency testing in the detection and resolution of calibration bias in the LeadCare® blood lead analyzer; limitations of peer-group assessment

Following implementation of the CLIA ‘88 laboratory regulations, the primary role of proficiency testing (external quality assessment, PT) in the U.S. has been widely viewed as one of assuring regulatory compliance. PT can also be an effective tool for detecting widespread analytical problems, subject to limitations based on the method of PT assigned value determination. A recent case study describes the role of two PT programs in detecting and resolving a calibration bias in the LeadCare blood lead analyzer, and illustrates the limitations of peer-group target determination in fulfilling that PT role.     

Investigation of the Crystallisation Behaviour of Lead Titanate (PT), Lead Zirconate (PZ) and Lead Zirconate Titanate (PZT) by EXAFS-Spectroscopy and X-Ray Diffraction

Two solid solutions of lead zirconium titanates PbZr _x Ti_{1 – x} O₃ (x = 0.1 and 0.35) as well as the reference compounds lead titanate and lead zirconate were prepared from zirconium and titanium n-propoxide, dissolved in 2-methoxyethanol, by sol-gel process. The amorphous products after pyrolysis of the dried gels and the crystalline phases were studied by EXAFS spectroscopy to monitor the structural changes from the amorphous oxide mixture to the crystalline ceramics after calcination. Additionally, the crystalline phases were identified by X-ray diffraction (XRD).It follows from the analysis of the EXAFS data that the local order of the amorphous phases seems to be completely different from that of the crystalline phase. There is no indication of a preformation of the local order of the perovskite structure. The analysis of our EXAFS spectra can be interpreted very consistently with the assumption that in the amorphous samples a segregation exists on molecular level and the low crystallisation temperatures are a consequence of very short diffusion paths.     

Tetraaryl-methane analogues in group 14—V. Distortion of tetrahedral geometryin terms of through-space π–π and π–σ interactions andNMR sagging in terms of π–σcharge transfer

44 members of thecompound series Ph_4−nMR_n (M=Si, Ge, Sn, Pb; R=o-, m-, p-Tol; n=0–4) were synthesized (15 newcompounds). The crystal structures of Ph₃Sn (o-Tol) and PhSn (o-Tol)₃ were determined and compared to 16 known structures. Subject to the distanced (M–C), an interplay between through-space π–π repulsion and π–σ attraction leads to either elongated or compressed tetrahedral geometry. ²⁹ Si-, ¹¹⁹ Sn- and ²⁰⁷ Pb-NMR chemical shifts were determined in solution and in the solid state. ⁷³ Ge chemical shifts were measured only in solution. Anupfield or downfield sagging of the chemical shifts along each series is rationalized in terms of a π–σcharge transfer which is constrained by torsion of the aromatic groups.     

DNA电化学生物传感器测定水中痕量铅

采用物理涂附法将单链DNA固定到金表面得到ssDNA/Au修饰电极。研究表明,该电极在pH 5,0.2 mol/L NaAc-HAc缓冲底液中,可用于测定水中痕量Pb2 。Pb2 以Pb-DNA络合物的形式吸附在电极上,以示差脉冲伏安法测定Pb2 ,在0.15 V(vsSCE)处有灵敏的氧化峰,其峰电流与Pb2 浓度在5.0×10-8~1.0×10-6mol/L范围内呈良好的线性关系,此法的检测限为2.0×10-8mol/L,该修饰电极的稳定性和抗干扰性都较好。用该电极对饮用水中的Pb进行检测,得到了满意的结果。     

An investigation of glasses for capillary chromatography

An investigation was conducted of various glasses, other than soda lime or borosilicate, for use in glass capillary gas chromatography. The work has uncovered some unique chromatographic qualities in the use of potash soda lead and fused silica glasses as materials for making glass capillary columns. The fused silica proved to be an ideal material for capillary column construction, being inherently more inert than glass containing metal oxides. It has been shown that through the use of thin wall capillary tubing of high flexibility many of the mechanical problems associated with glass capillary columns, such as fragility and column straightening, can be avoided.     

Plant-Derived Natural Products as Lead Agents against Common Respiratory Diseases

Never has the world been more challenged by respiratory diseases (RDs) than it has witnessed in the last few decades. This is evident in the plethora of acute and chronic respiratory conditions, ranging from asthma and chronic obstructive pulmonary disease (COPD) to multidrug-resistant tuberculosis, pneumonia, influenza, and more recently, the novel coronavirus (COVID-19) disease. Unfortunately, the emergence of drug-resistant strains of pathogens, drug toxicity and side effects are drawbacks to effective chemotherapeutic management of RDs; hence, our focus on natural sources because of their unique chemical diversities and novel therapeutic applications. This review provides a summary on some common RDs, their management strategies, and the prospect of plant-derived natural products in the search for new drugs against common respiratory diseases.     

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb²⁺ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g⁻¹, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.     

Recent study of nanomaterials prepared by inert gas condensation using ultra high vacuum chamber

The ultra high vacuum chamber was developed in the Department of Nuclear Physics, University of Madras with the funding from DST, India. This UHV chamber is used to prepare nanocrystalline materials by inert gas condensation technique (IGCT). Nanocrystalline materials such as PbF₂, Mn²⁺-doped PbF₂, Sn-doped In₂O₃ (ITO), ZnO, Al₂O₃, Ag₂O, CdO, CuO, ZnSe:ZnO etc., were prepared by this technique and characterized. Results of some of these materials will be presented in this paper. In solid-state²⁰⁷Pb NMR on PbF₂ a separate signal due to the presence of grain boundary has been observed. The structural phase transition pressure during the phase transformation from the cubic phase to orthorhombic phase under high pressure shows an increase with the decrease in grain size. Presence of electronic centres in nanocrystalline PbF₂ is observed from Raman studies and the same has been confirmed by photoluminescence studies. Al₂O₃ was prepared and⁵⁶Fe ions were implanted. After implantation segregation of⁵⁶Fe ions was examined by SEM. The oxidation properties of ITO were studied by HRTEM. As against the expectation of oxide coating on individual nanograins of In-Sn alloy, ITO nanograins grew into faceted nanograins on heat treatment in air and O₂ atmosphere. The growth of ITO under O₂ atmosphere showed pentagon symmetry. The PMN was initially prepared by solid-state reaction. Further, this PMN relaxor material will be used to convert into nanocrystalline PMN by IGCT with sputtering and will be studied     

A Microcell for Stripping Analysis with Glassy Carbon and Mercury-Plated Glassy Carbon Electrodes

Abstract

A microcell has been constructed for stripping analysis in solution volumes as low as 5 μl, employing a glassy carbon or mercury-plated glassy carbon working electrodes and a three electrode system. Using normal d.c. stripping techniques, as little as 100 picograms of mercury and 10 picograms of lead can be determined. With the more sensitive second harmonic a.c. voltammetric technique, this limit is lowered to 10 picograms of mercury and 1 picogram of lead.     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image