Oxidation of 1-methylcyclobutanol by Pb(IV) and Mn(III) compounds

The main product of the reaction of 1-methylcyclobutanol with Pb(OAc)₄ in benzene is 1-phenyl-4-pentanone; the use of Mn(OAc)₃ in acetic acid gives a mixture of 2,9-decanedione and methyl propyl ketone; 1-(chloro-, bromo-, thiocyano-, or cyano)-4-pentanone is formed in the presence of the systems Pb(OAc)₄-metal halide or Mn(OAc)₃-metal halide.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2760–2763, December, 1992.     

A Novel Oxidative N-Demethylation of 12-Membered Macrolide with Lead Tetraacetate

Erythromycin has been extensively used in the treatment of bacterial infections for over 50 years1. In addition to the antimicrobial effect, the quite unique antiinflammatory activity of the erythromycin derivatives has attracted much attention as new the…     

Heterometallic lead-titanium oxyalkoxide precursors to lead titanate thin films

Two lead titanium oxyalkoxides with composition Pb₂Ti₄O₂(O₂CCH₃)₂(OC₂H₅)₁₄ and Pb₂Ti₂O₂(O₂CCH₃)₂(OCH(CH₃)₂)₈ have been isolated and characterised by elemental analysis, IR, ²⁰⁷Pb NMR and molecular weight measurements. X-ray structural analysis of the 1:2 complex confirmed the presence of two Pb₂Ti₂O units which are linked by a common Pb···Pb edge and are held together by alkoxide and acetate bridges. The acetate groups have migrated from the Pb to the Ti centres during the reaction. Hydrolysis of the 1:1 Pb/Ti complex produced clear gels providing the H₂O/complex ratio was less than 4. Heat treatment of the gel results in loss of residual organics below 400°C. The XRD pattern indicates the presence of the pyrochlore and perovskite phases after heating at 500°C but the sample is poorly crystalline. Complete conversion to the perovskite phase of lead titanate occurs on heating to 600°C for 1 hour. Thin films of lead titanate were deposited by dip-coating a solution of this complex in isopropanol. Analyses of the films, carried out using electron microprobe, Scanning Auger Spectroscopy and Rutherford Backscattering, indicated that they were of excellent quality, crystalline after heating at 600°C and with relatively sharp substrate-coating interface.     

产母及新生儿血铅水平及影响因素的研究

为了解佛山市产母、新生儿血铅水平及其相关影响因素 ,采用电感耦合高频等离子体发射光谱法 ,于 2 0 0 2年 5～ 9月 ,取本院产科产母静脉血及其新生儿脐血 1 5 2例 ,进行血铅、钙、锌、铁、铜和锰水平测定 ,按妇幼保健管理卡内容 ,进行相关记录。结果表明 ,产母血铅水平90 1± 3 4 8μg/L ,BPb≥ 1 0 0 μg/L者占 2 0 3 9% ;新生儿脐血铅水平 89 2± 3 1 6μg/L ,铅中毒率为2 2 3 7% ;母子血铅值呈显著正相关 (r=0 85 7,P <0 0 1 ) ,产母血铅值与其血钙、铁值显著负相关 (r=0 2 66,-0 3 0 1 ,P <0 0 5 ) ;城郊产母及新生儿血铅水平显著高于城区。揭示市郊孕妇、新生儿血铅较高 ,血钙、锌、铁含量影响血铅水平     

半化学法制备Pb(Fe2/3W1/3)O3陶瓷粉体的反应机理

铅系弛豫铁电陶瓷钨铁酸铅Pb(Fe2/3W1/3)O3(PFW)是一种重要的介电材料,具有较大的介电常数(8000)和较低的烧结温度(小于900℃),适用于制备低烧高介的多层陶瓷电容器犤1～4犦。在传统氧化物法合成PFW的过程中,易生成恶化介电性能的钨酸铅(PbWO4或Pb2WO5)或焦绿石相(Pb2FeWO6)等其他相犤3,4犦。尽管通过加入过量5%的Fe2O3可以消除这些其他相,但因含较多的变价铁离子(Fe3+和Fe2+)而产生介电老化的缺点犤5犦。虽然二次合成法被广泛用于制备铅系弛豫铁电陶瓷犤6犦,但对制备PFW陶瓷的效果并不明显,仍有少量的钨酸铅PbWO4存在,并且预烧…     

Thermal Analysis of Hexachloroplumbate and Chlorides Containing Complex Divalent Lead 2,2'-bipyridine Cations

Lead(II) 2,2'-bipyridine hexachloroplumba tetetrahydrate was synthesized and investigated by DTA, TG and DTG. IR spectroscopy and other methods enabled the identification of some of the decomposition products. Comparative studies on the corresponding chlorides: [Pb(bipy)]Cl₂ and [Pb(bipy)₃]Cl₂, which can be considered as precursors of the hexachloroplumbate, were also undertaken. X-ray measurements enabled the tentative determination of the crystal structure of [Pb(bipy)]Cl₂. Hexachloroplumbate decomposes with the liberation of chlorine, water and organic ligands, and the process is accompanied by the simultaneous transition of Pb(IV)→Pb(II). Chlorides release only ligands upon heating. Residues comprised always PbCl₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

The ordered phase of methylammonium lead chloride CH3ND3PbCl3

The perovskite-structured compound methylammonium lead chloride orders into a low-temperature phase of space group Pnma, in which at 80 K each of the orthorhombic axes , and is doubled with respect to the room temperature disordered cubic phase (). The structure was solved by ab initio methods using the programs EXPO and FOX. This unusual cell basis for space group Pnma is not that of a standard tilt system. This phase, in which the methylammonium ions, are ordered shows distorted octahedra. The octahedra possess a bond angle variance of 60.663°² and a quadratic elongation of 1.018, and are more distorted than those in the ordered phase of methylammonium lead bromide. There is also an alternating long and short Pb-Cl bond along a, due to an off-center displacement of Pb within the octahedron. This suggests that the most rigid unit is actually the methylammonium cation, rather than the PbCl₆ octahedra, in agreement with existing spectroscopic data.     

流动注射在线液—液萃取原子吸收光谱法测定生物样品中的铅

本文利用所设计的一种新型流动注射液－液萃取重力分相器，建立了流动注射液溶剂萃取原子吸收光谱法测定铅的新方法，详细地研究了流动注射在线萃取的实验条件及流路系统，方法的精密度和检出限分别为２．５％（ｎ＝１１）和２．８μｇ／Ｌ（ｋ＝３）。用拟定的方法测定了峰蛹，粮食等生物样品中的铅，结果与参考值相吻合。     

Effects of Lead on Temporal Response Properties of Retinal Ganglion Cells in Developing Rats

Neonatal rats have taken in lead, during the period from their parturition to their weaning, from the milk of dams fed with water containing 0.2% lead acetate solutions. The alterations in the temporal response properties of retinal ganglion cells in adult rats (90 days) following the lead exposure at their developing stage have been studied. The results of this investigation demonstrate that the lead exposure in neonatal rats causes decreases in the optimal temporal frequency, bandwidth at half amplitude, temporal resolution and response phase of the retinal ganglion cells in adult rats. Compared with the sustained cells, the transient cells have a much greater alteration in temporal response properties.     

Rapid Synthesis of Lead Oxide Nanorods by One-step Solid-state Chemical Reaction at Room Temperature

A simple and facile method was reported to synthesize lead oxide nanorods. Nanorods of lead oxide were obtained directly from grinding solid metal salt and sodium hydroxide in agate mortar with the assistance of a suitable nonionic surfactant in only one step, which is different from the result of hydroxide in solution. The product has been characterized by XRD, TEM and SEM. The formation mechanism of rod-like morphology is discussed and the surfactant plays an important soft-template role in modifying the interface of solid-state reaction and according process of rod-formation.