Cis‐trans Isomerism in Copper(II) Complexes with N‐acyl Thiourea Ligands

The N‐acyl thiourea complexes bis[N,N‐diethyl‐N′‐(p‐nitrobenzoyl)‐thioureato]copper(II) ( 1a,1b ) and bis(N,N‐diphenyl‐N′‐benzoylthioureato)copper(II) ( 2a,2b ) crystallize in each case in two modifications. X‐ray structural analysis shows that 1a and 1b are cis‐trans isomers. This is very unusual for N‐acyl thioureato complexes because with exception of one platinum(II) complex up to now only cis complexes have been found. In contrast X‐ray structural analysis of both forms 2a and 2b of the other complex shows no cis‐trans pair. Both modifications are cis complexes. In solution both isomers of the copper(II) complexes are observable by EPR spectroscopy.     

Synthesis and anticonvulsant activity of new fluorinated N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-dione derivatives: Part III

A series of N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-diones containing a fluoro or trifluoromethyl substituents at the aryl ring was synthesized and tested for their anticonvulsant activity in the maximal electroshock (MES) and subcutaneous metrazole (sc.Met) tests. Among them, the most active were N-benzyl derivatives with fluoro and trifluoromethyl substituents especially at position-2 of the aryl moiety. The introduction of the phenyl ring at the imide nitrogen atom resulted in less active compounds. The results obtained showed that incorporation of fluoro or trifluoromethyl substituents increased the anticonvulsant activity in comparison to respective chloro, methoxy or methyl analogues. Crystallographically obtained conformation for one active and two inactive derivatives with trifluoromethyl substituents at position-2 or -3 of phenyl ring were initially used for molecular electrostatic potentials (MEP) calculation. The MEP distribution at carbonyl oxygen atoms was different for active and inactive molecules.     

MENTHOR,a database system for the storage and retrieval of three-dimensional molecular structures and associated data searchable by substructural,biologic, physical,or geometric properties

Summary MENTHOR is a database system for the storage and retrieval of three-dimensional coordinate and charge information on molecules as well as of traditional biological and physical properties. Our molecular graphics system retrieves from MENTHOR structural information in individual molecules and receptor map/macromolecular binding site hypotheses. Substructural searches of MENTHOR are used to find starting coordinates for molecular modeling and traditional database searches of MENTHOR identify compounds for which modeling is needed. It also forms the data to be searched with ALLADDIN, our substructure/geometric search program. MENTHOR expedites molecular modeling by organizing previous work and facilitating transmission of information between individuals. Examples from modeling of D-2 receptor agonists are shown.     

The number of kekulé structures for rectangle-shaped benzenoids,part VIII: Some perforated rectangles

Summary Classes of coronoids (or degenerate coronoids), r and q are obtained by providing the rectangle-shaped benzenoids R^j (m, 3) with a naphthalenic or pyrenic hole, respectively. The numbers of Kekulé structures (K) are studied. It was found for theK numbers of the classes in question:r=4/5R andq=1/5R. The classes r and q are similar to r and q, respectively, but the naphthalenic or pyrenic hole is oriented in a different way. For these classes it was found:r=3/5R,q=2/5R.

---

Die Anzahl von Kekulé-Strukturen für hochkondensierte Benzenoide mit rechteckigem Umriß, 8. Mitt.: Einige perforierte benzenoide Rechteck-Strukturen

Zusammenfassung Es werden Klassen r und q von Coronoiden (oder degenerierten Coronoiden) erhalten, wobei Benzenoide mit rechteckigem Umriß, R^j(m, 3), mit einem Naphthalin- oder Pyren-Loch versehen werden. Die Anzahl von Kekulé-Strukturen (K) wird untersucht; dabei wurde für die untersuchten Klassenr=4/5R undq=1/5R gefunden. Die Klassen r und q verhalten sich ähnlich, das Naphthalin- oder Pyren-Loch ist jedoch anders orientiert; dafür wurder=3/5R undq=2/5R gefunden.

     

Aldol condensations over reconstructed Mg-Al hydrotalcites: structure-activity relationships related to the rehydration method

Two different rehydration procedures in the liquid or gas phase have been applied to reconstruct mixed oxides derived from calcined hydrotalcite-like materials to be used as catalysts for aldol condensation reactions. The as-synthesized hydrotalcite, its decomposition product, as well as the reconstructed solids upon rehydration were characterized by XRD, N(2) adsorption, He pycnometry, FTIR, SEM, TEM, (27)Al MAS-NMR and CO(2)-TPD (TPD=temperature-programmed desorption). Compared to the Mg-Al mixed oxide rehydrated in the gas phase (HT-rg), that rehydrated in the liquid phase (HT-rl) exhibits a superior catalytic performance with respect to the aldol condensation of citral with ketones to yield pseudoionones and in the self-aldolization of acetone. The textural properties of HT-rl and HT-rg differ strongly and determine the catalytic behavior. A memory effect led to a higher degree of reconstruction of the lamellar structure when the mixed oxide was rehydrated in the gas phase rather than in the liquid phase, although liquid-phase rehydration under fast stirring produced a surface area that was 26 times greater. This contrasts to typical statements in the literature claiming a higher degree of reconstruction in the presence of large amounts of water in the medium. CO(2)-TPD shows that the number of OH(-) groups and their nature are very similar in HT-rg and HT-rl, and cannot explain the markedly different catalytic behavior. Accordingly, only a small fraction of the available basic sites in the rehydrated samples is active in liquid-phase aldol condensations. Our results support the model in which only basic sites near the edges of the hydrotalcite platelets are partaking in aldol reactions. Based on this, reconstructed materials with small crystallites (produced by exfoliation during mechanical stirring), that is, possessing a high external surface area, are beneficial in the reactions compared to larger crystals with a high degree of intraplatelet porosity.     

Sr3(BS3)2 und Sr3(B3S6)2: Zwei neue nicht‐oxidische Chalkogenoborate mit trigonal‐planar koordiniertem Bor

Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂: Two Novel Non‐oxidic Chalcogenoborates with Boron in a Trigonal‐Planar Coordination The thioborates Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂ were prepared from strontium sulfide, amorphous boron and sulfur in solid state reactions at a temperature of 1123 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction. Sr₃(BS₃)₂ crystallizes in the monoclinic spacegroup C2/c (No. 15) with a = 10.187(4) Å, b = 6.610(2) Å, c = 15.411(7) Å, β = 102.24(3)° and Z = 4. The crystal structure of Sr₃(B₃S₆)₂ is trigonal, spacegroup R3¯ (Nr. 148), with a = 8.605(1) Å, c = 21.542(4) Å and Z = 3. Sr₃(BS₃)₂ contains isolated [BS₃]^3— anions with boron in a trigonal‐planar coordination. The strontium cations are found between the layers of orthothioborate anions. Sr₃(B₃S₆)₂ consists of cyclic [B₃S₆]^3— anions and strontium cations, respectively.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Quecksilber(II)‐chlorid‐ und ‐iodid‐Komplexe von Dithia‐ und Tetrathiakronenethern

Mercury(II) Chloride and Iodide Complexes of Dithia‐ and Tetrathiacrown Ethers The complexes [(HgCl₂)₂((ch)₂30S₄O₆)] ( 1 ), [HgCl₂(mn21S₂O₅)] ( 2 ), [HgCl₂(ch18S₂O₄)] ( 3 ) and [HgI(meb12S₂O₂)]₂[Hg₂I₆] ( 4 ) have been synthesized, characterized and their crystal structures were determined. In [(HgCl₂)₂((ch)₂30S₄O₆)] two HgCl₂ units are discretely bonded within the ligand cavity of the 30‐membered dichinoxaline‐tetrathia‐30‐crown‐10 ((ch)₂30S₄O₆) forming a binuclear complex. HgCl₂ forms 1 : 1 “in‐cavity” complexes with the 21‐membered maleonitrile‐dithia‐21‐crown‐7 (mn21S₂O₅) ligand and the 18‐membered chinoxaline‐dithia‐18‐crown‐6 (ch18S₂O₄) ligand, respectively. The 12‐membered 4‐methyl‐benzo‐dithia‐12‐crown‐4 (meb12S₂O₂) ligand gave with two equivalents HgI₂ the compound [HgI(meb12S₂O₂)]₂[Hg₂I₆]. In the cation [HgI(meb12S₂O₂)]⁺ meb12S₂O₂ forms with the cation HgI⁺ a half‐sandwich complex.     

Preparation, characterization, and application of multistimuli-responsive microspheres with fluorescence-labeled magnetic cores and thermoresponsive shells

Novel functional microspheres with multistimuli-responsive properties have been prepared and characterized. The as-prepared microspheres respond to an external magnetic field, environmental temperature, and ultraviolet radiation. The in vitro drug-loading efficiency and drug-release behavior of these microspheres demonstrated that they could be used as drug carriers for drug controlled release. The results of in vivo distribution investigations of these microspheres showed that they exhibit a high magnetic-targeting effect, which holds promise for applications in various fields such as magnetic drug targeting and tissue labeling, among others.     

A facile synthesis of solid-emissive fluorescent dyes: dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores with strong blue and green fluorescence emission properties

A new type of organic fluorophores, dialkylbenzo[b]naphtho[2,1-d]furan-6-one-type fluorophores, exhibiting strong blue and green emission in the solid state has been easily synthesized by an one-step reaction. The X-ray crystal structure demonstrated that the structural form with a chair-shape with the sterical hindered dialkyl substituents and the 9-dibutylamino group prevents the fluorophores from forming short intermolecular contacts and produces intense solid-state fluorescence emission.