Vibration and dissipative heating of a layered rectangular viscoelastic prism under harmonic shear loading

The vibration and vibrational heating of a rectangular prism with copper and polyethylene layers is studied by solving numerically a coupled problem of thermoelasticity. The cases of kinematic and mechanical harmonic shear loads on a section of the prism surface are examined. Local heating regions are revealed. They are due to the stress fields in the neighborhood of the points at which the type of boundary conditions changes. The temperature–time curves have preresonance, resonant, and postresonance sections. The heating process reaches a steady thermal state under kinematic loading and may become avalanche-like (which is typical of thermal instability) under mechanical loading Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 70–78, February 2009.     

12-磷钨酸插层MgAl水滑石的合成、表征及催化酯化原油脱酸性能

采用离子交换法合成了不同Mg/Al物质的量比的12-磷钨酸(H_3PW_(12)O_(40),HPW)插层水滑石(LDHs),采用XRD、FT-IR、Raman、ICP-AES、TG-DSC等分析手段表征其物化性质,Hammett指示剂-正丁胺滴定法测定其酸强度和酸量分布。进一步将其用于原油催化酯化脱酸反应,并与NO_3型LDHs对比,探讨酯化活性与催化剂性质之间的关系。结果表明,催化剂的活性主要受酸性和比表面积的影响。HPW插层LDHs的酯化活性明显优于NO3型LDHs,归因于增强的酸性和增大的比表面积。对于弱酸性的NO_3型LDHs,酯化活性与比表面积呈正向关系,Mg/Al物质的量比为4时,具有最大的比表面积和脱酸活性。而对于较强酸性的HPW插层LDHs,酯化活性主要受到酸量的影响,Mg/Al物质的量比为2的催化剂具有最高的酸量和脱酸活性。     

层状二氧化锰和2,2'-联吡啶铁自组装膜的制备和光电性能研究

采用静电吸附层-层自组装方法制备了层状二氧化锰/2,2'-联吡啶铁自组装膜材料,借助扫描电镜(SEM),紫外可见光谱(UV-Vis)和电化学工作站等测试手段对自组装膜的结构与性能进行了表征.结果表明,该自组装膜具有均匀的表面和紧密的层状结构,在可见光照射条件下该自组装膜电极的氧化还原电流明显增加了.层状二氧化锰/2,2'-联吡啶铁自组装膜电极,在可见光照射条件下光电降解有机染料罗丹明B(1×10-5mol/L)反应80min降解率达到了57%.     

十二烷基磺酸根插层水滑石负载纳米钯催化的 Suzuki 偶联反应

 首次制备了十二烷基硫酸根 (DS–) 插层水滑石负载的纳米钯无膦配体型的 Suzuki 偶联反应催化剂. DS–进入到水滑石层间, 使层间距从微孔增至 2.9 nm, 从而有利于中等尺度的有机分子在催化剂表面的扩散. 进一步以 PdCl42–交换该水滑石得到 DS–和 PdCl42– 双插层的水滑石. 还原后可得到层间插有金属钯纳米团簇的水滑石. 由于 DS–插层后在水滑石层板间形成的空间有限, 限制了 Pd0 团簇的进一步生长. 作为一种亲油性的非均相催化剂, 该类催化剂可有效促进卤代芳烃与苯硼酸的 Suzuki 偶联反应. 催化剂循环使用 5 次后活性基本得以保持.     

水平层状介质中电磁场并矢Green函数的一种快速新算法

本文利用提取直射波并结合自适应数字滤波等技术提出一种计算水平层状介质中电磁场并矢Green函数的快速算法. 首先将谱域Green函数中表征均匀介质作用的直射波提取出来并对其积分进行解析计算,这种处理降低了谱域Green函数的奇异性,可在很大程度上缩短其积分收敛区间. 然后在将谱域Green函数剩余部分对应积分转化为三个快速下降积分的基础上,引入一种自适应数字滤波算法对其进行快速求解. 最后通过具体算例验证了本文所述算法的有效性. 关键词： 并矢Green函数 快速算法 水平层状介质     

Nanotubes from misfit layered compounds

Abstract

First, the mechanisms leading to the formation of nanotubes from layered (2-D) materials are briefly discussed. Two main mechanisms are evoked: (1) The asymmetry of the layer along the c-axis, which leads to spontaneous folding, as revealed first by Pauling in 1930; (2) The seaming of the layer due to the abundance of dangling bonds in the rim atoms of the 2-D nanoclusters. This mechanism was discussed first in connection with carbon fullerenes and carbon nanotubes, some 30 years ago and was further extended to inorganic 2-D materials in 1992. In the second part of this work, the formation mechanism of nanotubes from misfit layered compounds (MLC) is deliberated. Here, the two forces are shown to work in synergy leading to facile formation of nanotubes from ternary misfit compounds. This synergy is demonstrated through the versatile chemistry, which has been employed to synthesize MLC nanotubes. Furthering in complexity, few recent examples of nanotubes from quaternary chalcogenide-based MLC are briefly discussed.