描述光伏效应的新解析模型

 对陆启生等人提出的描述光伏效应的解析模型涉及的边界条件进行了讨论，提出了一个适用性更宽的解析模型。通过对新模型、陆的模型以及另一个解析模型的比较，对前两个模型能够描述光伏型光电探测器在强光辐照时的信号饱和效应的原因进行了解释。     

离轴球形粒子对高斯波束的散射光通量的计算

利用矢量球谐函数展开的方法,研究了离轴球形粒子对椭圆高斯波束的散射。根据其远区散射场的形式,得出了归一化散射场的斯托克斯参量(散射强度)与颗粒直径、折射率以及散射角的关系。建立了计算离轴球形粒子对高斯波束散射通量的解析模型,计算了散射光在任意散射方向上的光通量,得到了前向任意立体角内散射通量的计算公式,为激光散射探测提供了理论依据。     

位相物体激光全息二次曝光法无损检测

为借助激光全息进行无损检测，获得位相物体的信息，对位相物体激光全息二次曝光法无损检测进行了研究，指出一般的二次曝光法测位相物体典型光路的缺点，提出了物光波2次通过样品的改进方案。利用此方案对一些位相物体(如普通玻璃和有机玻璃)作了无损检测实验，得到了较满意的实验结果。与普通检测方法相比，该方法具有精度高、结果直接可靠、不损伤物体等诸多优点。对改进方案稍作改动，即可用于塑料制品和玻璃制品生产线对加工产品进行在线产品质量监控。     

Pulsed reactive crossed beam laser ablation of La0.6Ca0.4CoO3 using O: Where does the oxygen come from?

The composition of thin perovskite films, especially the oxygen content, is a crucial parameter which influences many physical properties, such as conductivity and catalytic activity. Films produced by pulsed laser deposition are normally annealed in an oxygen atmosphere after deposition to achieve a desired oxygen content. In pulsed reactive crossed beam laser ablation, no annealing step is necessary, but a fundamental question regarding this deposition technique is still open: where does the oxygen in the films come from?There are three possibilities, i.e. from the target, from the gas background, or from the gas pulse. To answer this question two experiments were performed: ¹⁸O₂ was used during the deposition process as background gas with ¹⁶O anions in the target and ¹⁶O₂ gas pulse, and a ¹⁸O₂ gas pulse with ¹⁶O from the target and background. These experiments revealed that the quantification of the oxygen origin is only possible, when no oxygen exchange occurs at the deposition temperature. The films are characterized after deposition by elastic recoil detection analysis (ERDA) to determine the ¹⁶O/¹⁸O ratio. Experiments with different oxidizing species in the gas pulse (N₂O and O₂) confirm that the oxidizing potential (N₂O > O₂) as well as the number of molecules are important.     

ICLAS of weak transitions of water between 11 300 and 12 850 cm: Comparison with FTS databases

Very weak water vapor absorption lines have been investigated by intracavity laser absorption spectroscopy (ICLAS) in the 11 335-11 947 and 12 336-12 843 cm⁻¹ spectral regions dominated by the ν₁ + 3ν₂ + ν₃ and ν₂ + 3ν₃ bands, respectively. A detectivity on the order of α_min ∼ 10⁻⁹ cm⁻¹ was achieved with an ICLAS spectrometer based on a Ti: Sapphire laser. It allowed detecting transitions with an intensity down to 5 × 10⁻²⁸ cm/molecule which is about 10 times lower than the weakest line intensities previously detected in the considered region. A line list corresponding to 1281 transitions with intensity lower than 5 × 10⁻²⁶ cm/molecule has been generated. A detailed comparison with the line lists provided by the HITRAN database and by recent investigations by Fourier transform spectroscopy associated with very long multi pass cell is presented. The rovibrational assignment performed on the basis of the ab initio calculations of Schwenke and Partridge, has allowed for determining 176 new energy levels belonging to a total of 16 vibrational states.     

Electronic spectra of cationic forms of meso-tetrapropylporphin in a nanoporous silicate gel matrix

We have studied the fluorescence and fluorescence excitation spectra at 300 K, 77 K, and 4.2 K for silicate gel matrices colored with meso-tetrapropylporphin by impregnation of the matrix with a solution of the pigment. Comparison of the data obtained with the absorption spectra in acidified solutions and analysis of the low-temperature fine-structure vibronic spectra, and also taking into account data obtained earlier for octaethylporphin in a xerogel showed formation of two cationic forms of meso-tetrapropylporphin in the gel matrix: the short-wavelength form has a dicationic structure, while the long-wavelength form has a monocationic structure. We have traced out the correlations of the vibrational structure in the spectra of the dicationic form with data for the porphin dication, and we have drawn a number of conclusions concerning the normal vibrational modes that are active in the vibronic fluorescence and absorption spectra of the studied cationic forms. Using the AM1 semiempirical quantum chemical method, we optimized the geometry of the mesotetrapropylporphin dication: the most stable of the possible conformers is the dication structure with saddleshaped macrocycle nonplanarity. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 453–461, July–August, 2006.     

激光穿透焊的三维数值模拟

本文对激光穿透焊进行了三维数值模拟，除考虑焊接速度影响外，还研究了Ｍａｒａｎｇｏｎｉ对流对熔池流动与传热的影响。将三维数值模拟结果与相应的二维模拟结果进行了比较，结果表明，Ｍａｒａｎｇｏｎｉ对流对熔池的形成有很大的影响，因此不可忽略。本文还给出了估计激光穿透焊中蒸气孔尺寸与焊接热效率的方法。     

Time-resolved fluorescence spectra of a bichromophoric molecule, 2-methyl-1,2,3,4-tetrahydroisoquinoline in various media

Time-resolved fluorescence spectra of a title molecule (with benzene and aliphatic amine parts) in various media, after excitation by several lasers were observed to complement the previous work by conventional spectroscopy [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. Though complex with many new features, the results were roughly consistent with the previous ones. The significant conclusions are as follows: (1) The emission to be ascribed to the amine (N) part, with more than one component (of nN and aN types) is observed not only for the acetonitrile solution (as previously reported) but also for all the other media. (2) Contrary to the case of a nonpolar hexane solution, both of N fluorescences in the other media reveal unusually long-lived decay components. This can be interpreted by assuming the so-called charge-transfer-to-solvent (CTTS) state that is nonfluorescent and lies just below the fluorescent state. (3) This observation in the protic media can also be taken as another evidence of the peculiar hydrogen bonding between this amine and the protic solvent molecules [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. (4) Thus, the unexpectedly large quantum yields of N fluorescences in the polar media are now interpreted as arising due to the slow S₁^N→(CTTS)→S₀ internal conversions.     

Monitoring the Aggregation of Dansyl Chloride in Acetone through Fluorescence Measurements

The aggregation of dansyl chloride (DNS-Cl) in acetone has been studied in detail by steady-state fluorescence techniques.It has been demonstrated that DNS-Cl is stable in acetone during purification and aggregation study processes.The aggregates are not solvolyzed in acetone,and do not take part n any chemical reactions either.It has been found that DNS-Cl tends to aggregate even when its concentration is much lower than its solubility in acetone.The aggregation is reversible,and both the aggregation and the deaggregation are very slow processes.Introduction of SDS has a positive effect upon the formation and stabilization of the aggregates.     

Superlattice CoCrPt/Ru/CoFe structure fabricated by pulsed laser deposition

The synthetic antiferromagnets (SAF) have been used in spin-valve sensor in data storage industry [1]. We report a new hard/Ru/soft sandwich structure (SHBL) fabricated by pulsed lased deposition to replace current single layer structure for information recording application. SHBL consists of two magnetic layers separated by thin nonmagnetic layers, typically with Ru layers of 0.7-1.2 nm, through which antiferromagnetic coupling is induced. Varying the relative thickness of the magnetic layers, the spacer layers, and the type of magnetic materials can alter magnetic properties of CoCrPt/Ru/CoFe superlattice. The coercivity H_c and grain size of magnetic layer is also dependent on the laser fluence. High laser fluence results in both small grain size and high H_c. The observed phenomena are related to high quenching and deposition rates during PLD at high fluence, resulting in more pronounced phase segregation.