大体积进样-乙腈盐堆积-胶束扫集毛细管电动色谱法对马来酸氯苯那敏的测定

建立了大体积进样-乙腈盐堆积-胶束扫集毛细管电动色谱法测定马来酸氯苯那敏片中马来酸氯苯那敏的新方法,并考察了样品中乙腈和NaCl浓度对分离效果的影响.结果表明,以12 mmol/L四硼酸钠-50 mmol/L硼酸- 50 mmol/L十二烷基硫酸钠(SDS)为缓冲液(含10%甲醇,pH9.1),以70%乙腈- 200m...     

Temperature‐Induced Transformation from Large Compound Vesicles to Worm‐like Aggregates by ABC Triblock Copolymer

Two triblock polymers, tetraaniline‐block‐poly(N‐isopropyl acrylamide)‐block‐poly(hydroxyethyl acrylate) (TA‐b‐PNIPAM‐b‐PHEA) and TA‐b‐PHEA‐b‐PNIPAM, were synthesized with unambiguous structure by a two step method. The difference of these two diblock polymers is the connection order of carboxyl group to block, e.g., carboxyl group to PNIPAM block for PNIPAM‐b‐PHEA and to PHEA block for PHEA‐b‐PNIPAM. Secondly, block tetraaniline was linked to the diblock polymer through amidation to yield the corresponding triblock copolymer. Both of them have almost the identical chemical compositions. The only difference is the connection order of each block in the triblock polymers. When they were self‐assembled at 45°C in a suitable solution, both of their aggregates have spherical shape with slight defects on their surface with the average diameter of about 400 nm. However, when their aggregate dispersion was cooled down to 20°C, only TA‐b‐PHEA‐b‐PNIPAM's morphology changed, forming worm‐like aggregates with the diameter of about 100–200 nm transformed from spherical aggregates. Both amphiphilic property and position of each block in this triblock copolymer are very essential for this morphology transformation. Since the worm‐like aggregates presented here by our group have hollow structure inside, its controlled release properties for doxorubicin were evaluated. Drug release experiment indicated that along with the temperature changes, the rearrangement of the intermediate layer structure caused morphology change in aggregate, thus accelerating the speed of drug release.     

微型固相萃取柱结合胃袋式大体积进样-气相色谱-质谱法同时快速测定菠菜中的13种有机磷农药残留

利用微型固相萃取柱对样品进行前处理,采用胃袋式大体积进样技术结合气相色谱-质谱(GC-MS),建立了菠菜中13种有机磷农药残留的同时快速分析方法。以保留时间和特征离子丰度比定性,以峰面积外标法定量,以3倍信噪比实验值确定方法的检出限(LODs),以10倍信噪比实验值确定方法的定量限(LOQs)。结果表明,除乐果外,其余12种有机磷农药的添加回收率为76.8%～114.0%,相对标准偏差为1.5%～17.6%,LODs为0.5～25 μg/kg。该方法前处理简单快速,分析成本低,分析时间短,灵敏度、准确度和精密度均符合农药多残留检测技术的要求,适用于食品中多种有机磷农药残留的快速灵敏检测。     

Modeling and simulation of chemo-electro-mechanical behavior of pH-electric-sensitive hydrogel

A chemo-electro-mechanical multi-field model, termed the multi-effect-coupling pH-electric-stimuli (MECpHe) model, has been developed to simulate the response behavior of smart hydrogels subject to pH and electric voltage coupled stimuli when the hydrogels are immersed in a pH buffer solution subject to an externally applied electric field. The MECpHe model developed considers multiphysics effects and formulates the fixed charge density with the coupled buffer solution pH and electric voltage effects, expressed by a set of nonlinear partial differential governing equations. The model can be used to predict the hydrogel displacement and the distributive profiles of the concentrations of diffusive ionic species and the electric potential and the fixed charge density in both the hydrogels and surrounding solution. After validation of the model by comparison of current numerical results with experiment data extracted from the literature, one-dimensional steady-state simulations were carried out for equilibrium of the smart hydrogels subject to pH and electric coupled stimuli. The effects of several important physical conditions, including the externally applied electric voltage, on the distributions of the concentrations of diffusive ionic species, the electric potential, the fixed charge density, and the displacement of the hydrogel strip were studied in detail. The effects of the ionic strength on the bending deformation of the hydrogels under the solution pH and electric voltage coupled stimuli are also discussed.     

On the deformation mechanisms of oriented PET and PP films under load

Uniaxially orienred semicrystalline poly(ethylene terephthalate) (PET) and poly(propylene) (PP) films were loaded parallel to draw direction at various temperatures. Changes in the submicroscopical structure of the films under load were examined by small and wide-angle x-ray scattering (SAXS; WAXS) and birefringence measurements. WAXS measurements reveal a decrease of the initial high orientation of the chains in the crystallites during deformation. Simultaneously, an increase of the birefringence was detected, indicating an orientation of chains in the amorphous regions. The alteration of the long period reflections in the SAXS patterns give strong evidence that lamellar stacks with different orientation angles according to load direction are present. Depending on the orientation of stacks, the contribution of lamellar separation to sample deformation alters, giving rise to different amounts of density changes in the stacks. Absolute intensity measurements of SAXS using a Kratky apparatus reveal that lamellar separation occurs preferentially below or in the range of the glass-transition temperature at small strain. With increasing strain and temperatures above the glass-transition slip deformation mechanisms become more important. The formation of microvoids was observed at strain near to elongation at break below or in the range of glass-transition temperature.     

How deeply are core electrons perturbed when valence electrons are spin polarized? The case study of transition metal compounds

The ferromagnetic and antiferromagnetic wave functions of the KMnF₃ perovskite have been evaluated quantum-mechanically by using an all electron approach and, for comparison, pseudopotentials on the transition metal and the fluorine ions. It is shown that the different number of α and β electrons in the d shell of Mn perturbs the inner shells, with shifts between the α and β eigenvalues that can be as large as 6 eV for the 3s level, and is far from negligible also for the 2s and 2p states. The valence electrons of F are polarized by the majority spin electrons of Mn, and in turn, spin polarize their 1s electrons. When a pseudopotential is used, such a spin polarization of the core functions of Mn and F can obviously not take place. The importance of such a spin polarization can be appreciated by comparing (i) the spin density at the Mn and F nuclear position, and then the Fermi contact constant, a crucial quantity for the hyperfine coupling, and (ii) the ferromagnetic–antiferromagnetic energy difference, when obtained with an all electron or a pseudopotential scheme, and exploring how the latter varies with pressure. This difference is as large as 50% of the all electron datum, and is mainly due to the rigid treatment of the F ion core. The effect of five different functionals on the core spin polarization is documented.     

Cell Membrane-camouflaged Multi-functional Dendritic Large Pore Mesoporous Silica Nanoparticles for Combined Photothermal Therapy and Radiotherapy of Cancer

Combining photothermal therapy and radiotherapy(PTT-RT) with reducing tumor hypoxia acts as an important antitumor modality. However, it is a great challenge to realize photothermal therapy, radiotherapy and exogenous oxygen supply in one nanosystem. To realize a combination of the three functions, we fabricated a red blood cell membrane(RBCm)-camouflaged, red blood cell content(RBCc) and the copper sulfide(CuS) co-loaded dendritic large pore mesoporous silica nanoparticle(DLMSN/CuS/RBCc/ RBCm). The cell membrane coating endowed the nanoparticles with good stability in the physiological environment, and CuS allowed the nanoparticle exhibiting good photothermal and radiosensitization properties. RBCc loaded nanoparticle DLMSN/CuS/RBCc enhanced superior anti-tumor effect than DLMSN/CuS during combined PTT-RT therapy because the introduction of RBCc increased the exogenous oxygen supply. The in vitro study further demonstrated that the combination of photothermal therapy and radiotherapy induced superior antitumor efficacy than single therapy. Our work thus presents a unique multifunctional nanoscale platform favorable for combined PTT and RT.     

Coordination around thorium(IV) in aqueous perchlorate,chloride and nitrate solutions

The coordination around the thorium(IV) ion in aqueous perchlorate, chloride and nitrate solutions has been determined from large angle X-ray scattering measurements. In perchlorate solutions, where inner-sphere complexes are not formed, the first coordination sphere contains 8.0±0.5 water molecules with Th-H₂O bond lengths of 2.48₅ Å. In chloride solutions inner-sphere complexes are formed, which lead to an increase in the coordination number. In nitrate solutions the nitrate ions are bonded as bidentate ligands to the thorium ion. The bond lengths are similar to those found in crystalline hydrates of thorium nitrate. The coordination numbers found for thorium(IV) in solution are compared with previously reported values for lower charged ions of similar size.On leave from Department of Inorganic Chemistry Royal Institute of Technology S-10044 Stockholm Sweden     

Spectral density distribution moments of a Hamiltonian of N coupled Morse oscillators: The large‐N limit

The expressions for moments of spectral density distribution of a Hamiltonian representing a system of N coupled Morse oscillators are reduced to the large‐N limit. The effect of the values of coupling constants on the spectral density distribution is analyzed. For the values of coupling constants within the pertinent range for real molecules, the relations between moments appear to be close to those for a Gaussian distribution. Outside this range, the deviations from the normal distribution are substantial. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

小实验大道理 ——从热缩片小制品DIY看高分子材料的熵致形变

A little experiment concerning the pyrocondensation materials was introduced in this paper. The aim was to help the public understand the principles of entropy induced deformation of polymer materials.