基于有机染料盐掺杂薄膜体系的能量转移及光致发光特性研究

利用稳态和时间分辨瞬态光谱研究了有机盐trans-4-［p-(N-ethyl-N-(hydroxyethyl)amino)phenylstyryl］-N-(hydroxyethyl)pyridinium iodide (ASPI)掺杂聚合物PVK(聚乙烯咔唑)薄膜体系的光致发光和能量转移特性. 在ASPI：PVK掺杂薄膜体系中,PVK的荧光强度与寿命随掺杂浓度的升高而降低,表明两者存在有效的Forster能量转移. 通过在相对低浓度的掺杂体系中加入适量高量子效率的Alq3作为能量转移过渡体,形成能量转移级 关键词： 有机染料盐 荧光光谱 荧光寿命 能量转移     

考虑液面凹陷时金属熔化与蒸发的数值研究

将关于液面凹陷的Young-Laplace方程与关于金属溶池的流体力学方程组及关于金属蒸发的ＢＧＫ方程联立求解，在给定的电子枪加热条件下，获得了熔池流场和温度场图像及金属蒸气密度、速度和温度分布.数值计算结果表明，随电子枪功率增加，金属的蒸发速率增加，蒸气的密度增大、温度降低而速度升高.与假设液面为平面的情况相比，考虑液面凹陷后求得的液面温度较低，金属的蒸发速率较小，并且这种差别随电子枪功率的增加而扩大.因此对于高功率电子枪加热金属蒸发，必须考虑液面凹陷的影响才能得到符合实际的结果. 关键词： 液面凹陷 Young-Laplace方程 熔池 金属蒸发     

钶铁矿型MnNb2O6的熔盐法合成、钒掺杂与磁性研究

采用了熔盐法新工艺制备了纯相与掺钒的MnNb₂O₆粉晶,利用X射线衍射仪(XRD),扫描电子显微镜(SEM),能谱分析(EDX),透射电子显微镜(TEM)、高分辨透射电镜(HRTEM)和电子衍射(SAED)分析了其物相、形貌及微结构.结果表明合成产物为正交晶系钶铁矿型MnNb₂O₆;在不同的熔盐中合成出了棒状、片状与长方体形貌的纯相产物.讨论了温度与掺杂对结构与形貌的影响,HRTEM与SAED分析表明了产物的各向异性生 关键词： 熔盐法 结构与形貌 掺杂 反铁磁性     

Nuclear magnetic resonance-compatible furnace for high temperature MR imaging and spectroscopy in situ

A high temperature magnetic resonance compatible furnace for real time in situ monitoring of materials, processes, and chemical reactions with magnetic resonance imaging and spectroscopy is described. Design issues are analyzed. Example applications are demonstrated with a time sequence of proton images of the binder burnout in a porous green ceramic cylinder containing polyethylene glycol binder at 200 degrees C, and 7Li images of the molten salt LiCl at 700 degrees C.     

Performance of La2O3/InAlN/GaN metal—oxide—semiconductor high electron mobility transistors

We report on the performance of La2O3/InAlN/GaN metal-oxide-semiconductor high electron mobility transistors(MOSHEMTs) and InAlN/GaN high electron mobility transistors(HEMTs).The MOSHEMT presents a maximum drain current of 961 mA/mm at Vgs = 4 V and a maximum transconductance of 130 mS/mm compared with 710 mA/mm at Vgs = 1 V and 131 mS/mm for the HEMT device,while the gate leakage current in the reverse direction could be reduced by four orders of magnitude.Compared with the HEMT device of a similar geometry,MOSHEMT presents a large gate voltage swing and negligible current collapse.     

采用快速升温烧结方法生长Tl-1223超导薄膜的研究

报道了在铝酸镧(00l)衬底上生长Tl-1223超导薄膜的快速升温烧结方法以及铊(Tl)源陪烧靶的配比对Tl-1223薄膜晶体结构的影响.扫描电子显微镜观测表明,采用快速升温烧结方法生长的Tl-1223超导薄膜具有致密的晶体结构.X-射线衍射等测试表明,采用合适配比的陪烧靶在氩气环境下可以制备出纯c轴取向的Tl-1223超导薄膜,充氧退火后的薄膜具有较好的电学性能,其临界转变温度T_(c onset)达到116K,临界电流密度达到1.5MA/cm~2(77 K,0 T).实验结果表明,采用这一新的烧结方法制备Tl系超导薄膜具有升降温时间和恒温时间短、生产成本低等特点.     

Er,Yb：(LaLu)2O3透明陶瓷制备及上转换发光性能

采用柠檬酸燃烧法制备Er,Yb：（LaLu）₂O₃陶瓷粉体,用X射线衍射对其进行了物相鉴定,研究表明1 000℃时已经得到纯相的（LaLu）₂O₃。采用冷等静压-真空烧结法制备了Er,Yb：（LaLu）₂O₃和Er：（LaLu）₂O₃陶瓷,对陶瓷的结构和光谱性能进行了详细的研究,研究发现掺杂5% Yb³⁺和10% La³⁺样品的上转换发光强度与未掺Yb³⁺、La³⁺样品相比明显增大,根据上转换光谱显示较强发射峰位于564 nm和661 nm处,对应Er³⁺的⁴S_3/2（²H_11/2）→⁴I_15/2能级跃迁和⁴F_9/2→⁴I_15/2能级跃迁,并讨论了Er³⁺-Yb³⁺的能量传递过程及其上转换发光机制。     

冰晶石-氧化铝熔盐的分子动力学研究

采用分子动力学方法,对冰晶石-氧化铝熔盐的结构及其电学性质进行了研究.通过对不同氧化铝含量熔盐的计算,证明文章采用的势函数参数,可以获得与实验相近的平均键长以及相同变化规律的密度.证实了Al-F-Al和Al-O-Al桥接络合离子的存在,由于这些络合离子的存在,阻碍了铝离子的自由运动,使得在铝离子电场作用下被带到阳极,降低了电解效率.同时离子淌度的计算显示钠离子是电场作用下导电的主要载流子.     

High‐Temperature Stable Zirconia Particles Doped with Yttrium,Lanthanum, and Gadolinium

Zirconia microspheres synthesized by a wet‐chemical sol–gel process are promising building blocks for various photonic applications considered for heat management and energy systems, including highly efficient reflective thermal barrier coatings and absorbers/emitters used in thermophotovoltaic systems. As previously shown, pure zirconia microparticles deteriorate at working temperatures of ≥1000 °C. While the addition of yttrium as a dopant has been shown to improve their phase stability, pronounced grain growth at temperatures of ≥1000 °C compromises the photonic structure of the assembled microspheres. Here, a new approach for the fabrication of highly stable ceramic microparticles by doping with lanthanum, gadolinium, and a combination of those with yttrium is introduced. The morphological changes of the particles are monitored by scanning electron microscopy, ex situ X‐ray diffraction (XRD), and in situ high‐energy XRD as a function of dopant concentration up to 1500 °C. While the addition of lanthanum or gadolinium has a strong grain growth attenuating effect, it alone is insufficient to avoid a destructive tetragonal‐to‐monoclinic phase transformation occurring after heating to >850 °C. However, combining lanthanum or gadolinium with yttrium leads to particles with both efficient phase stabilization and attenuated grain growth. Thus, ceramic microspheres are yielded that remain extremely stable after heating to 1200 °C.     

掺Yb3+氧化镧钇透明激光陶瓷的光谱特性

采用传统陶瓷烧结工艺,在无压还原气氛下低温制备出透明性良好的掺Yb3+氧化镧钇透明激光陶瓷,测试了其在室温下的吸收光谱、发射光谱和荧光寿命.结果表明,掺Yb3+氧化镧钇透明激光陶瓷的吸收系数随着Yb3+掺杂浓度的增加而增大,最强吸收峰974nm处的吸收截面为0.90～1.12×10－20 cm2;主发射峰1 032 nm和1 075 nm处的发射截面分别为1.05×10－20 cm2和0.87×10－20 cm2; Yb3+掺杂浓度为5at.%时荧光寿命为1.38 ms,并随Yb3+掺杂浓度的增加而减小;当Yb3+掺杂浓度超过10at.%时,样品中存在严重的浓度猝灭.产生浓度猝灭的原因是高掺杂时离子间存在合作上转换和能量转移.