三（3,5-二叔丁基水杨醛缩苯乙胺）镧引发L-丙交酯与ε-己内酯开环共聚合

以三（3,5-二叔丁基水杨醛缩苯乙胺）镧La (OPEBS)₃为引发剂引发L-丙交酯(_L-LA)和ε-己内酯(ε-CL)的共聚,可控合成嵌段共聚物.研究了单体加料顺序、投料比、单体与引发剂的摩尔比(M/I)及聚合温度对_L-LA和ε-CL共聚的影响.由石油醚抽提纯化的聚合物经GPC、¹H NMR和DSC分析,表明该共聚物为_L-LA和ε-CL嵌段共聚物.     

新型双吡啶盐的合成及其作为硝酸根离子荧光增强型探针的性能研究

阴离子普遍存在于生命体和环境中,在化学、生物学、医学和环境领域都具有重要的作用,而硝酸根是其中一种非常重要的无机阴离子,对环境和人体健康都具有极大危害。目前测定硝酸根离子的方法主要有电化学法、离子色谱法和离子选择性电极法等。虽然各方法各具优势,但也存在明显不足。电化学法重现性差,而离子色谱法和离子选择性电极法需要较为复杂、昂贵的仪器及较长的分析时间。荧光光谱由于具有较高的灵敏度和操作简便等优点,近年来成为阴离子识别和检测领域的研究热点。以吡喃盐为起始原料,设计合成了一种新型的双吡啶盐化合物,通过核磁共振1 H谱、13 C谱以及高分辨质谱确定了其分子结构。并研究了其与不同阴离子的荧光识别性能,显示出对硝酸根离子明显的特异性识别。在双吡啶盐溶液中滴加硝酸根离子后,荧光呈现显著增强,而其他竞争性阴离子则淬灭初始荧光。通过荧光滴定实验证实双吡啶盐探针与硝酸根离子形成稳定的1∶1超分子配合物,稳定常数lgK=5±0.02。通过计算机模拟计算以及变温核磁共振波谱表明硝酸根离子与双吡啶盐上活性氢形成稳定的氢键,并诱导整个双吡啶盐分子的共平面性增大,荧光强度增强,从而达到选择性识别的效果。     

土壤含盐量与电导率的高光谱反演精度对比研究

探明土壤盐渍化的高光谱遥感监测机理,对改善高光谱遥感监测精度具有重要意义。以南疆地区温宿县、和田县、拜城县的水稻土为研究对象,通过分析土样的高光谱数据和室内测定的盐分与电导率数据,研究了耕作土壤含盐量与电导率的关系,并比较了含盐量和电导率与不同光谱指标的相关性以及二者高光谱反演的精度。结果表明,南疆水稻土的含盐量与电导率的相关性较低,二者之间的关系因地区差异而有较大的变化;含盐量与反射率、一阶微分、连续统去除之间的相关性要优于电导率,特别在一些土壤盐渍化的敏感波段尤为突出;以含盐量建立的多元线性回归、主成分回归、偏最小二乘回归模型的决定系数和相对分析误差均高于电导率。研究表明高光谱信息对土壤含盐量的响应比电导率更敏感,以含盐量为监测指标的高光谱反演精度明显要优于电导率。该结果可为提高土壤盐渍化高光谱遥感监测精度提供理论依据。     

无机盐对非离子表面活性剂从水相到油相传质的影响研究

采用同位素示踪原子法研究了非离子表面活性剂在无机盐存在下从水相到油相传质的规律,发现无机盐强烈地影响非离子表面活性剂Ａｐ型和Ｓｐ型的传质行为,而且因无机盐性质的不同,表面活性剂结构的差异,传质行为亦会有很大的不同。中外,利用此技术研究解决了连续定量测定微量表活剂的问题,为系统研究表面传质问题开辟了一个新方法。     

钒的一个特别灵敏指示反应

本文研究了钒（V）在乙酸介质中催化溴酸钾氧化钙试剂羧酸钠盐的褪色反应。本方法的灵敏度为2.5×101?g/ml,与同类方法相比为最高,测定范围为0～4ngV/25ml。本法已用于水样中超痕量钒测定。     

Oxygen ion conductivity of Lao.sSro.2Gao.s3Mgo.17-xCoxO3-δ synthesized by laser rapid solidification

Materials Lao.8Sro.2Gao.83Mgo.17_xCox03_6 with x = 0, 0.05, 0.085, 0.10, and 0.15 are synthesized by laser rapid solidification. It is shown that the samples prepared by laser rapid solidification give rise to unique spear-like or leaf-like microstructures which are orderly arranged and densely packed. Their electrical properties each show a general depen dence of the Co content and the total conductivities of Lao.8Sro.2Gao.83Mgo.085Coo.08503_6 prepared by laser rapid solidification are measured to be 0.067, 0.124, and 0.202 S.cm-1 at 600, 700, and 800 ℃, respectively, which are much higher than by conventional solid state reactions. Moreover, the electrical conductivities each as a function of the oxy gen partial pressure are also measured. It is shown that the samples with the Co content values 〈 8.5 mol% each exhibit basically ionic conduction while those for Co content values 〉 10 mol % each show ionic mixed electronic conduction under oxygen partial pressures from 10-16 atm （1 atm = 1.01325 x 105 Pa） to 0.98 atm. The improved ionic conductivity of Lao.sSro.2Gao.83Mgo.085Coo.08503 prepared by laser rapid solidification compared with by solid state reactions is attributed to the unique microstructure of the sample generated during laser rapid solidification.     

电化学刻蚀法制备LaB6场发射微尖锥阵列

采用电化学刻蚀方法,成功制备出单尖的六硼化镧、钼、钨及钨铼合金场发射冷阴极尖锥,并对这几种场发射单尖锥阴极的电子发射性能进行了测试比较.结果表明,LaB₆作为场发射阴极,具有良好的发射性能和稳定性.在〈111〉面单晶LaB₆基片上,用PECVD法沉积非晶硅作掩膜,制备出具有一定高度的LaB₆微尖锥场发射阵列,结果发现,LaB₆基底较为平整,尖锥阵列呈现出各向异性.该结论对LaB₆材料在场发射阴极方面的进一步研究具有重要的指导意义.     

Measurement of stable isotope activities in saline aqueous solutions using optical spectroscopy methods

The requirement to measure the stable isotopic compositions of saline pore fluids by optical methods has prompted a re-evaluation of the isotopic salt effect for common salts. Hydrogen and oxygen isotopic salt effects were measured at room temperature (21°C) by optical methods. For hydrogen isotopes, our results agree well with those of previous studies and better define these effects at low temperatures. In contrast, measured oxygen isotope salt effects disagree within error for NaCl and CaCl₂ solutions from those reported previously. Subtle differences between measurement methods may account for the discrepancy. In studies that involve highly saline fluids, the isotopic salt effect must be taken into account because modern methods that measure stable isotopic compositions as activities or concentrations may be not directly comparable to historical data sets.     

熔盐包层设计与氚增殖比的计算

通过对聚变堆设计包层进行先后的一维、三维氚增殖比计算与分析,确定合适的模块材料、明确的模块划分以及相应的模块厚度,最终找到了合适的满足氚自持(TBR=1.3162)的熔盐设计包层。