钕敏化多层壳纳米结构的增强型染料敏化上转换发光

对于稀土离子掺杂的上转换发光,由于稀土离子吸收截面小、吸收范围窄,导致其发光强度受限.最近,在稀土上转换纳米粒子的表面连接近红外染料分子敏化发光,被证实是提高上转换发光强度的有效策略.然而,将染料分子连接经典的稀土Yb掺杂纳米粒子,并不能有效利用染料分子的敏化能力.针对这一问题,本文通过高温热分解法成功制备了Nd3+敏...     

二甲醚低温低压自点火行为的实验和理论研究

针对二甲醚(DME)低温低压数据缺乏和反应机理认识不统一问题,利用高压激波管进行点火延迟期测量实验,实验工况完整覆盖负温度系数(NTC:Negative Temperature Coefficient)区域.使用Aramco Mech 3.0机理对实验结果进行了数值仿真,发现与实验数据相比存在两个差异较大的典型区域:N...     

A unified description of sum frequency generation,parametric down conversion and two-photon fluorescence

A superoperator non-equilibrium Green's function formalism is presented for computing nonlinear optical processes involving any combination of classical and quantum optical modes. Closed correlation-function expressions based on superoperator time-ordering are derived for the combined effects of causal response and non-causal spontaneous fluctuations. Coherent three wave mixing (sum frequency generation and parametric down conversion) involving one and two quantum optical modes, respectively, are compared with their incoherent counterparts: two-photon-induced fluorescence and two-photon-emitted fluorescence.     

Structural studies on banana oil,isoamyl acetate,by means of microwave spectroscopy and quantum chemical calculations

The rotational spectrum of isoamyl acetate, H₃C–COO–(CH₂)₂–CH(CH₃)₂, has been recorded and assigned using a molecular beam Fourier transform microwave (MB-FTMW) spectrometer in the frequency range of 3–26.5?GHz. One conformer has been observed. By comparing the spectroscopic data with the quantum chemical data, it was found that the conformer observed does not have C_s symmetry. The rotational and centrifugal distortion constants were determined. The barrier to internal rotation of the acetate methyl group was found to be 93.98?cm^?1. Due to the high number of the conformers, a systematic nomenclature will be presented.     

2. Mitteilung: Tetraphenylarsoniumverbindungen und Pentaphenylarsen

Es wurde ein Trennverfahren ausgeabeitet, das es gestattet, die Aktivitätsausbeuten für Mono-, Di- und Triphenylarsenverbindungen, für Tetraphenylarsoniumverbindungen und für Pentaphenylarsen sowie für nicht organisch gebundenes Arsen in neutronenbestrahlten Tetraphenylarsoniumver erbindungen und in Pentaphenylarsen zu bestimmen. Als Trennmethoden werden Extraktion, Ionenaustauwsch und Al₂O₃-Chromatographic benutzt. Zur Reinigung und Ausbeutebestimmung von Di- und Triphenylarsenprodukten sowie von Tetraphenylarsonimverbindungen finden Kristallisations- bzw. Fällungsreaktionen Anwendung unter Ausnutzung des Prinzips der Isotopenverdünnungsanalyse.     

Large Eddy Simulations of a piloted lean premix jet flame using finite-rate chemistry

A Large Eddy Simulation (LES) model capable of accurately representing finite-rate chemistry effects in turbulent premixed combustion is presented. The LES computations use finite-rate chemistry and implicit LES combustion modelling to simulate an experimentally well-documented lean-premixed jet flame stabilized by a stoichiometric pilot. The validity of the implicit LES assumption is discussed and criteria are expressed in terms of subgrid scale Damköhler and Karlovitz numbers. Simulation results are compared to experimental data for velocity, temperature and species mass fractions of CH₄, CO and OH. The simulation results highlight the validity and capability of the present approach for the flame and in general the combustion regime examined. A sensitivity analysis to the choice of the finite-rate chemistry mechanism is reported, this analysis indicates that the one and two-step global reaction mechanisms evaluated fail to capture the reaction layer with sufficient accuracy, while a 20-species skeletal mechanism reproduces the experimental observations accurately including the key finite-rate chemistry indicators CO and OH. The LES results are shown to be grid insensitive and that the grid resolution within the bounds examined is far less important compared to the sensitivity of the finite-rate chemistry representation. The results are analyzed in terms of the flame dynamics and it is shown that intense small scale mixing (high Karlovitz number) between the pilot and the jet is an important mechanism for the stabilization of the flame.     

The role of cool-flame chemistry in quasi-steady combustion and extinction of n-heptane droplets

Experiments on the combustion of large n-heptane droplets, performed by the National Aeronautics and Space Administration in the International Space Station, revealed a second stage of continued quasi-steady burning, supported by low-temperature chemistry, that follows radiative extinction of the first stage of burning, which is supported by normal hot-flame chemistry. The second stage of combustion experienced diffusive extinction, after which a large vapour cloud was observed to form around the droplet. In the present work, a 770-step reduced chemical-kinetic mechanism and a new 62-step skeletal chemical-kinetic mechanism, developed as an extension of an earlier 56-step mechanism, are employed to calculate the droplet burning rates, flame structures, and extinction diameters for this cool-flame regime. The calculations are performed for quasi-steady burning with the mixture fraction as the independent variable, which is then related to the physical variables of droplet combustion. The predictions with the new mechanism, which agree well with measured autoignition times, reveal that, in decreasing order of abundance, H₂O, CO, H₂O₂, CH₂O, and C₂H₄ are the principal reaction products during the low-temperature stage and that, during this stage, there is substantial leakage of n-heptane and O₂ through the flame, and very little production of CO₂ with no soot in the mechanism. The fuel leakage has been suggested to be the source of the observed vapour cloud that forms after flame extinction. While the new skeletal chemical-kinetic mechanism facilitates understanding of the chemical kinetics and predicts ignition times well, its predicted droplet diameters at extinction are appreciably larger than observed experimentally, but predictions with the 770-step reduced chemical-kinetic mechanism are in reasonably good agreement with experiment. The computations show how the key ketohydroperoxide compounds control the diffusion-flame structure and its extinction.     

Using self-similar properties of turbulent premixed flames to downsize chemical tables in high-performance numerical simulations

Detailed chemical mechanisms have to be incorporated in turbulent combustion modelling to predict flame propagation, ignition, extinction or pollutant formation. Unfortunately, hundreds of species and thousands of elementary reactions are involved in hydrocarbon chemical schemes and cannot be handled in practical simulations, because of the related computational costs and the need to model the complexity of their interaction with turbulent motions. Detailed chemistry may be handled using look-up tables, where chemical parameters such as reaction rates and/or species mass fractions are determined from a reduced set of coordinates, progress variables or mixture fractions, as proposed in ILDM, FPI or FGM methods. Nevertheless, these tables may require large computer memory spaces and non-negligible access times. This issue becomes of crucial importance when running on massively parallel computers: to implement these databases in shared memories would induce a large number of data exchanges, reducing the overall code performance; on the other hand duplicating databases in every local processor memory may become impossible either for large databases or small local memories. This work proposes to take advantage of the self-similar behaviour of turbulent premixed flames to reduce the size of these chemical databases, specifically when running on massively parallel machines, under the FPI (Flame Prolongation of ILDM) framework. Several approaches to reduce the database are investigated and discussed both in terms of memory requirements and access times. A very good compromise is obtained for methane–air turbulent premixed flames, where the size of the database is decreased by a factor of 1000, while the access time is reduced by about 60%.     

钴掺杂MoSe2共生长中氢气的作用分析及磁电特性研究

采用原位共生长化学气相沉积法,以Co3O4、MoO3、Se粉末为前驱物,710℃下在SiO2衬底上生长掺钴MoSe2纳米薄片,分析讨论氢气含量对其生长及调节机理的影响.表面形貌分析表明,氢气的引入促进了成核所需的氧硒金属化合物以及横向生长中需要的CoMoSe化合物分子的生成;AFM(Atomic Force Microscope)结果表明氢气有利于生长单层二维超薄掺钴MoSe2.随着Co3O4前驱物用量的增加,样品的拉曼和PL(Photoluminescence)谱图分别表现出红移和蓝移现象,带隙实现从1.52—1.57 eV的调制.XPS(X-ray photoelectron spectroscopy)结果分析得到Co的元素组分比为4.4%.通过SQUID-VSM(Superconducting QUantum Interference Device)和器件电学测试分析了样品的磁电特性,结果表明Co掺入后MoSe2由抗磁性变为软磁性;背栅FETs器件的阈值电压比纯MoSe2向正向偏移5 V且关态电流更低;为超薄二维材料磁电特性研究及应用拓展提供了基础探索.     

氨基酸官能团的太赫兹振动模式研究

对比于氨基酸的红外分析法,太赫兹波的电子能量更低,可实现无损检测。氨基酸分子内原子振动、分子间氢键的作用、以及晶体中晶格的低频振动均处于太赫兹波段,使其在太赫兹波段具有吸收峰,且不同的氨基酸分子太赫兹吸收峰不同,故可用氨基酸在太赫兹波段的这种“指纹特性”实现氨基酸类物质的定性分析。量子化学分析方法可以应用量子力学的基本原理和方法,研究稳定和不稳定分子的结构、性能及其之间的关系,还可以针对分子与分子间的相互作用、相互碰撞及相互反应等问题进行研究。通过量子化学计算方法计算氨基酸分子的太赫兹吸收谱,可以为氨基酸分子的太赫兹吸收峰匹配分子振动模式,对氨基酸定性分析有一定参考性与指向性,并为实验获取的样品太赫兹时域光谱提供理论支撑,在实验获得太赫兹吸收谱的基础上进行量子化学计算,还能为实验结果进行验证。首先利用太赫兹时域光谱技术获取了谷氨酰胺、苏氨酸、组氨酸的太赫兹吸收谱,分别构建这三种氨基酸样品在实物中以两性离子形式存在的单分子构型,利用量子化学计算方法在完成结构优化后进行太赫兹吸收谱模拟计算。计算结果表明三种氨基酸单分子的太赫兹吸收谱计算结果与实验获取的太赫兹吸收谱差异较大,但在高频段吸收峰峰位基本吻合。通过GaussView分别查看了这三种氨基酸分子在太赫兹段内的吸收峰对应频率处的振转情况,发现在高频段内三种氨基酸分子官能团均只发生转动而未见振动,并且转动模式基本一致。通过对氨基酸官能团的太赫兹吸收谱进行量子化学计算,将官能团在高频段内吸收峰对应频率处的振转模式与三种氨基酸分子在该段内吸收峰对应频率处的振转模式做了对比。研究表明,在氨基酸单分子构型下由量子化学方法计算所得的太赫兹吸收谱中,高频段内计算得出的模拟吸收峰与实验获取的太赫兹吸收峰基本吻合;振转模式分析发现,谷氨酰胺、苏氨酸、组氨酸在太赫兹高频段内的氨基酸官能团振转模式相同,三种氨基酸分子在高频段内的吸收峰主要来源于氨基酸官能团。因此,结合量子化学计算与太赫兹吸收谱可以实现氨基酸类物质的定性分析。