Volumetric, ultrasonic and viscometric studies of binary mixtures of dimethyl sulphoxide with chloro and nitro substituted aromatic hydrocarbons at T = 303.15 K

Excess volumes (V^E) ultrasonic sound velocities (u), isentropic compressibilities (K_s) and viscosities (η) have been measured for the binary mixtures of dimethylsulphoxide (DMSO) with 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,2,4-trichlorobenzene, o-chlorotoluene, m-chlorotoluene, p-chlorotoluene, o-nitrotoluene and m-nitrotoluene at T = 303.15 K. The measured V^E values were positive over the entire composition range in all the binary mixtures. Isentropic compressibilities (K_s) have been computed for the same systems from precise sound velocity and density data. Further, deviation in isentropic compressibility (ΔK_s) from ideal behaviour was also calculated. The viscosity data are analysed on the basis of corresponding states approach. Deviation in viscosities are positive over the entire composition range. The measured data is explained on the basis of intermolecular interactions between unlike molecules.     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

Variation of physicochemical properties in the aggregates of structual isomers

The regions of variation of density, enthalpy of formation, and detonation velocity of all of the formally possible structual isomers were determined for several molecular formulas of C,H,N,O-containing explosives. The histograms of the distribution of the structual isomers over these parameters were constructed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 859–862, May, 1995.The authors are grateful to Mrs. I. D. Solodukhina for the design of the graphical material.The work was carried out with the financial support of the Russian Foundation for Basic Research (Project No. 94-03-09323).     

The nonsymmetric pressure tensor in polyatomic fluids

Nonequilibrium molecular dynamics calculations are used to show that polyatomic fluids can support antisymmetric stress. In a homogeneous system where the time dependence of vorticity is a step function, it is shown that the rate at which intrinsic angular velocity approaches its steady-state value ( = 1/2 × u) is determined by the magnitude of the antisymmetric part of the pressure tensor.     

Cooling Characteristics During Bath Quenching of Test Probe Using Inverse Heat Transfer

It is of engineering importance to accurately predict the surface cooling characteristics in bath quenching of metals and alloys. In this investigation, the surface cooling characteristics in quenching of Wolfson probe are estimated with reasonable accuracy by solving an inverse heat conduction problem. Regularization method is used for smoothening the input temperature measurements at probe center, for superior inversion estimates. The reverse pool-boiling curve is captured on bath quenching characteristic, plotted as cooling velocity versus surface temperature. The prime advantage is the bypassing of convection coefficients, which are uncertain in pool boiling.     

The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

Experimental and numerical investigation of aramid fibre reinforced laminates subjected to low velocity impact

The low velocity impact performance of domestic aramid fibre reinforced laminates is investigated experimentally and numerically. Laminates with different thicknesses are impacted by drop-weight test machine under different impact energies. The time histories of impact force are recorded and ultrasonic C-scan technology is used to inspect the internal damage of the laminates. Numerical simulation is conducted using finite element method (FEM), taking into account both intralaminar and interlaminar damage. The intralaminar damage model is based on the continuum damage mechanics (CDM) approach, which consists of the strain-based Hashin failure criteria and the exponential damage evolution law, and considers the nonlinear shear behaviour of the material. The interlaminar damage is simulated by interface elements with cohesive zone model. The numerical results show good agreements with the experiments, thus verifying the validity of the presented numerical model.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

On The Mechanism of “Hole Burning” In Vibronic Spectra of Complex Organic Compounds

The “hole burning” in continuous vibronic absorption spectra on photobleaching of dye solutions was usually investigated by two methods.     

X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.