Inorganic electrides

Inorganic electrides are a novel kind of ionic compounds in which the anions are electrons confined in a complex array of cavities or channels and the cations are nanoscale arrays of alkali metal ions that provide charge balance. In electrides the donated electron behaves like a low-density correlated electron gas, whereby the dimensionality of the electron gas and its electronic and magnetic properties are determined by the topology of the cavities in the host matrix. Unlike traditional electrides, in which alkali cations are encapsulated within an organic cage, inorganic electrides are thermally stable. The current inorganic electrides based on alkali metal loaded zeolites can be designed as useful reduced-dimensionality materials. Inorganic electrides are powerful reducing agents, and they are able to reduce small aromatic molecules to the radical anions within the channels of the zeolite.     

Modification of solids with volatile organics III: Natural zeolites

Summary The effect of pre-adsorbed benzene and ethanol on the adsorptive properties of natural zeolite (clinoptilolite) has been studied by gas-solid chromatography. It has been shown that modification of the solid surface by volatile organics has a significant influence on the adsorptive properties. The modification is of the same order as the more difficult modification by inorganics, as illustrated here by clinoptilolite modification with Co²⁺. Energy distribution of surface adsorptive sites appears to be continuous and confirms previous finding that only a small proportion of active sites is responsible for most adsorbate retention. Part II reference [4]     

Measurement of Diffusion in Zeolites—A Never Ending Challenge?

A review is given on the main problems associated with the determination and interpretation of molecular diffusion in zeolites. It is shown that the diffusivities may most decisively depend on the relevant space and time scales of observation, as well as on the physical state under which the measurements are carried out. Special emphasis is given to the microscopic techniques and their most recent evidence on the existence of transport resistances distributed over the intracrystalline space.     

探针反应和FTIR法研究Pt与L型沸石的相互作用

探针反应和ＦＴＩＲ法研究Ｐｔ与Ｌ型沸石的相互作用董家禄,朱建华,须沁华,张婕,刘大壮（南京大学化学系,南京,２１０００８）（郑州工学院化工系,郑州,４５０００２）关键词Ｐｔ／Ｌ沸石,沸石催化剂,异丙醇分解反应,Ｐｔ－载体相互作用Ｐｔ的分散度和电子状态...     

Thermal transformations in systems based on zeolites Y,X, and A containing zinc and sodium nitrates

Thermal transformations in systems formed by interaction of Zn and Na nitrates with Y, X, and A zeolites were studied by TG—DTA technique. Temperature regions of existence of adsorbed water, water of crystallization, and decomposition of NO₃ ^– anion were determined. These intervals depend on the composition, structure, method of preparation, and pre-treatment conditions of zeolite systems. The extent of NO₃ ^– decomposition depends not only on the zinc and sodium content but also on the presence of ammonia involved in NO₃ ^– reduction. The zeolite matrix strongly stabilizes the occluded NO₃ ^– anions. A portion of zinc oxide formed by zinc nitrate decomposition is probably localized inside the zeolite cavities as the [Zn—O—(ZnO) _n —Zn]²⁺ particles. The latter compensate charges of the isolated [AlO₄]^– tetrahedra.     

Acid properties of semicrystalline zeolitic mesoporous UL-ZSM-5 materials

UL-ZSM-5 materials have been prepared by templated solid-state crystallization of zeolites starting from the amorphous mesostructured aluminosilicate Al-Meso. Microcalorimetry and FTIR have been employed to characterize their surface acidity. In good agreement with ²⁷Al MAS NMR data, UL-ZSM-5 displayed an improved density and strength of Brönsted acid sites, as compared to Al-Meso, owing to the incorporation of aluminium in a tetrahedral environment similar to that of zeolite ZSM-5. Moreover, they showed an enhanced Brönsted/Lewis relative acid ratio. However, Al-Meso showed the highest concentration of strong Lewis acid sites due to its largest amount of aluminium in extraframework positions.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Sol-Gel Routes to Zeolite Membranes and Thin Films

The synthesis of zeolite membranes and thin films using the secondary growth process is briefly described. In this process colloidal zeolite particles (sols) are prepared hydrothermally and then subsequently deposited on substrates to produce uniform layers of controlled thickness, as illustrated with silicalite and zeolite-A. The formation and growth of the zeolite sols has been investigated in situ by small angle neutron scattering (SANS). SANS measurements on silicalite sols at progressively higher concentrations have provided details of the colloid interactions which lead to zeolite gel-layer structures which are uniform and free of defects.     

SSZ-53 and SSZ-59: two novel extra-large pore zeolites

The syntheses, structure solutions, and physicochemical and catalytic characterizations of the novel zeolites SSZ-53 and SSZ-59 are described. SSZ-53 and SSZ-59 were synthesized under hydrothermal conditions with the [1-(4-fluorophenyl)cyclopentylmethyl]trimethyl ammonium cation and 1-[1-(4-chlorophenyl)cyclopentylmethyl]-1-methyl azocanium cation, respectively, as structure-directing agents. The framework topology of SSZ-53 was solved with the FOCUS method, and the structure of SSZ-59 was determined by model building. Rietveld refinement of synchrotron X-ray powder diffraction data confirms each proposed model. SSZ-53 and SSZ-59 each possess a one-dimensional channel system delimited by 14-membered rings. Results from transmission electron microscopy, electron diffraction, catalytic experiments (spaciousness index and constraint index tests), and argon and hydrocarbon adsorption experiments are consistent with the proposed structures.     

Thermal behavior of multiwall carbon nanotube/zeolite nanocomposites

Summary In this study we report the synthesis and thermal characterization of multiwall carbon nanotubes containing zeolite based nanocomposites. Three different zeolites (LTA, FAU and MFI) were used in this study and it was observed that the morphologies of the synthesized nanocomposites were significantly different. For FAU zeolite nanocrystals with a few nm in diameter were nucleated on the nanotubes covering their surface, however, for LTA and MFI zeolites bulky crystals with nanotubes crossing them were observed by transmission electron microscopy. One of the most important results of our study was the generation of secondary mesoporosity in the zeolites after removing the carbon nanotubes.