A kinetic stability study of MN (MBe,Mg, Ca,Sr, and Ba)

This work describes a structure and kinetic stability study of some complexes with the general formula MN, where M are the alkaline earth metal atoms, Be, Mg, Ca, Sr, and Ba. A complex (A) with two points of attachment to the N₅ ring is the most energetically favored for all metals considered here. Except for Be, structure (B) containing a mono‐coordinated metal atom is a transition state corresponding to the metal atom transfer around the N₅ ring. Pyramidal structure (C) is kinetically unstable with the low isomerization barrier height, ranging from 0.9 to 6.7 kcal/mol. The dissociation barrier heights for the lowest energy isomers (A) are predicted to be 1.2–18.7 kcal/mol (Be to Ba), indicating that kinetic stability increases from lighter to heavier metal atoms. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Kinetic resolution of heterocyclic amines by reaction with optically active acid chlorides. The effect of reaction conditions on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine

The influence of the reaction conditions (solvent, base) on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine with (S)-naproxen and N-tosyl-(S)-proline chlorides was studied. The highest diastereoselectivity was observed for the reaction carried out in benzene in the presence of aliphatic tertiary amines.     

Determination of trace rhodium by supramolecular catalytic kinetic spectrofluorimetry of β-CD-rhodium-KBrO3-vanillin salicylhydrazone

A sensitive catalytic kinetic spectrofluorimetric approach for determining ng mL⁻¹ levels of rhodium is presented, and the possible mechanism of the catalytic reaction was investigated. The determination is based on the catalytic property of rhodium to enhance the reaction of o-vanillin salicylhydrazone (OVSH) with potassium bromate in a water-ethanol medium at pH 4.80 and 45 °C. The presence of β-cyclodextrin (β-CD) obviously sensitized the assay due to its high inclusion ability towards OVSH. Under optimized experimental conditions, fluorescence measurements of the β-CD-rhodium-KBrO₃-OVSH catalytic kinetic reaction system were carried out in its fluorescent band centered at λ_ex = 333 nm and λ_em = 476 nm, respectively. The calibration graph was linear over the concentration range of 0.47–100 ng mL⁻¹ with a detection limit of 0.14 ng mL⁻¹. The effect of interferences was discussed, and the results show that the extraction method can be used to separate rhodium from interference species such as iridium. The proposed method, applied to several synthetic mixtures containing rhodium mixed with varying amounts of metal salts, produced satisfactory results.     

Photophysical aspects of single-molecule detection by two-photon excitation with consideration of sequential pulsed illumination.

An important goal in single molecule fluorescence correlation spectroscopy is the theoretical simulation of the fluorescence signal stemming from individual molecules and its autocorrelation function. The simulation approaches developed up to now are based exclusively on continuous-wave (cw) illumination and consequently on cw-excitation. However, this approximation is no longer valid in the case of two-photon excitation, for which pulsed illumination is usually employed. We present a novel theoretical model for the simulation of the fluorescence signal of single molecules and its autocorrelation function with consideration of the time dependence of the excitation flux and thus of all illumination-dependent photoprocesses: two-photon excitation, induced emission and photobleaching. Further important characteristics of our approach are the consideration of the dependence of the photobleaching rate on illumination and the low intersystem-crossing rates of the studied coumarins. Moreover, using our approach, we can predict quantitatively the effect of the laser pulse width on the fluorescence signal of a molecule, that is, the contributions of the photobleaching and saturation effects, and thus we can calculate the optimal laser pulse width. The theoretical autocorrelation functions were fitted to the experimental data, and we could ascertain a good agreement between the resulting and the expected parameters. The most important parameter is the photobleaching constant sigma, the cross section of the transition Sn<--S1, which characterises the photostability of the molecules independent of the experimental conditions. Its value is 1.7 x 10(-23) cm2 for coumarin 153 and 5 x 10(-23) cm2 for coumarin 314.     

Determination of Utratrace Silver Using Surfactant As Sensitizer by Catalytic Near Field Laser Thermal Lens Spectrometry

Thermal lens spectrometry (TLS) is an excellent tool for trace analysis1. TLS allows the detection of absorbances of 10-7～10-8, concentration of ≈ 10-11 mol稬-1 and the analysis of 10-15 L volumes with ≈10-2 absorbing molecules2. Kinetic analysis is playing an increasingly important part in modern analytical chemistry. Therefore, TLS shows much promise in combination with kinetic analysis. However, there are few data on TLS applications in kinetic analysis method so far3～4. A ne…     

二维卷积在动力学分析中的应用

本文用计算机模拟和二维卷积研究了稀土与间乙酰基偶氮氯膦的显色反应，选择不同的模型参数可描述这类反应的细节，二维卷积则增强对叠合二维谱的分辨。     

First C-C bond formation in the Pauson-Khand reaction: Influence of carbon-carbon triple bond polarization on regiochemistry: A density functional theory study

The influence of carbon-carbon triple bond polarization on the regiochemistry of the Pauson-Khand reaction has been studied with the B3LYP functional. The regiochemistry determining step of this reaction, i.e., olefin insertion leading to cobaltacycle formation, has been examined with ethylene as the olefin and propyne, methyl 2-butynoate, and methyl propiolate as the acetylenes. From this study, it has been concluded that, in absence of overwhelming steric effects of an acetylene substituent, the regiochemistry is influenced by the polarization of the acetylenic bond, which arises from the different substituents. The initial C-C bond is preferentially formed with the acetylenic carbon that has the greater electron density: with propyne, this leads to a cyclopentenone having the methyl group in the α-position; with methyl 2-butynoate, to a cyclopentenone with the CO₂Me in the β-position; with methyl propiolate, which is virtually unpolarized in the complex, to a cyclopentenone with the CO₂Me in the α-position (a result of steric effects). These theoretical results are concordant with those observed experimentally with norbornene. The question of axial versus equatorial reactive positions for the coordinated olefin is also addressed and a kinetic simulation is presented.     

Enantiomer differentiation in intramolecular carbon—hydrogen insertion reactions of racemic secondary alkyl diazoacetates catalyzed by chiral dirhodium(ii) carboxamidates

Highly efficient kinetic resolution of racemic secondary alkyl diazoacetates in intramolecular carbon-hydrogen insertion reactions has been achieved using chiral dirhodium(ii) carboxamidates. Products formed from catalytic diazo decomposition of racemic 2-octyl diazoacetate and, separately, its (2R)- and (2S)-enantiomeric forms, as well as bothcis- andtrans-2-methylcyclohexyl diazoacetates, have been systematically evaluated. Enantioselectivities up to 99 %ee have been obtained for -lactone formation. -Lactone production has been observed and, although minor with cyclohexyl diazoacetates, is the major insertion pathway for diazo decomposition of 2-octyl diazoacetate.Dedicated to Academician of the RAS N. S. Zefirov (on his 60th birthday).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1798–1803, September, 1995.Financial support for this research from the National Institutes of Health (GM 46503) and the National Science Foundation of the United States is gratefully acknowledged. We thank D. A. Pierson for her preparation of 2-methylcyclohexyl diazoacetates and preliminary studies of their diazo decomposition and A. Melekhov from the Higher College of Chemistry for his preparation and catalytic studies of rac-2-octyl diazoacetate.     

Trend to equilibrium of weak solutions of the Boltzmann equation in a slab with diffusive boundary conditions

Recently R. Illner and the author proved that, under a physically realistic truncation on the collision kernel, the Boltzmann equation in the one-dimensional slab [0, 1] with general diffusive boundary conditions at 0 and 1 has a global weak solution in the traditional sense. Here it is proved that when the Maxwellians associated with the boundary conditions atx=0 andx=1 are the same MaxwellianM _w , then the solution is uniformly bounded and tends toM _w fort.