Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Collisional Relaxation of Luminescence Anisotropy in Rarefied Gases in the Condensed Phase

The orientational relaxation of optically induced anisotropy in rarefied gases and at a damped rotation has been investigated. It has been found that the anisotropy relaxation in rarefied gases is described by a reduced kinetic equation depending only on free rotation integrals. The behavior of the integral anisotropy of luminescence for free symmetric and asymmetric top molecules has been elucidated. The law of luminescence depolarization has been obtained for asymmetric top molecules in the Gordon J-diffusion model. It represents the sum of two Stern–Volmer-type dependences, whose relative contribution is determined by the orientation of the dipole moments of transitions with absorption and emission of light in the molecular coordinate system and by the principal moments of inertia of the molecular top. It has been established that in the limit of a strongly damped rotation, kinetic equations of the general form reduce to equations of rotational diffusion. A number of modified diffusion equations correctly describing the contribution of inertial effects to the orientational relaxation of anisotropy have been obtained.     

饮食中微量元素砷的分布规律与人体健康关系

采用催化动力学光度法测定了六大类(共三十种)样品中的总砷含量，探讨了砷在食品中的分布规律，建立了砷在人体中的安全系效和积累系效的效学评价公式，用于评价砷与人体健康的关系，这对人们选择食物有一定的指导意义。     

Petrographic/geochemical studies of primary and alteration–weathering minerals in garnetiferous ultramafic xenoliths–basanite, Tartous Province, NW Syria

Kimberlitic–pyropic peridotite–xenolites, probably of Jurassic–Cretaceous age, were found mixed with a younger Upper Tertiary basanitic diabase, as flow texture of plagioclase laths and ilmenite rods around those xenoliths indicated. Mafic–ultramafic rocks were crushed, sheared, and cropped along a creek about 15–18 km NE of the town of Dreikeesh, NW Syria. ⁴⁰K–⁴⁰Ar isotopic dating of a pure fresh black cpx sample, collected from the peridotite xenoliths, yielded an age of about 70 Ma. This age is concurrent to the time when Africa, Eurasia, and America were part of the super continent Pangaea. It also suggests that kimberlite–pyropic peridotitic rocks were located within a cratonic pipe prior to their 2000-km eastward journey (starting from the Mid-Atlantic Rift). Sampled outcrops were located within a ring of about 40 km diameter, considered to be a dome consisting of one or more clusters of kimberlitic pipes. The dome structure, mostly covered with Upper Jurassic–Cretaceous carbonate beds, was tilted westward, and rifted and sheared along its eastern edge. Tilting and crushing were accomplished after the opening of the Red Sea in the Miocene, and the counterclockwise movements of the Arabian plate, which folded the carbonate beds to form the N–S-trending Alawite mountain range along the Syrian coast. Olivine, cpx, and pyrope were the major phases in peridotite. Pyrope, including its Cr–Ni-contents, was found to be the best indicator to decipher the temperature–pressure (T–P) conditions for the system. The inferred temperature was found to be about 1460 °C, at a pressure of 62 kb (around 207 km-depth). Petrographic studies revealed many zoned, resorbed, octahedral and non-metasomatized tiny grains, associated with partly to wholly metasomatized and iddingsitized olivines.     

Equilibrium State of Inhomogeneous Plasma

We consider the problem of a self-consistent determination of an essentially inhomogeneous equilibrium state of classical plasma. The solutions of the stationary Vlasov–Poisson equations are constructed in the form of a localized transition layer that separates the domains of homogeneous plasmas with different equilibrium parameters. The layer can also transform into a local perturbation inside a homogeneous plasma. In both cases, the solution contains neither mass currents nor electric currents, and all electrodynamic and hydrodynamic quantities and their derivatives are continuous. The parameters of the adjacent domains uniquely determine the transition layer structure.     

First total synthesis of the E type I phytoprostanes

The first total synthesis of two E type I phytoprostanes from furan, azelaic acid monomethyl ester and rac-1,2-epoxybutane is described. The key features of our synthetic strategy encompass an enzymatic kinetic resolution of a hydroxycyclopentenone, a Co-salen hydrolytic kinetic resolution of a terminal epoxide and a tandem conjugate addition/diastereoselective protonation sequence to construct the protected phytoprostanes. Mild cleavage of the silyl protective groups followed by enzymatic ester hydrolysis afforded the free E-type phytoprostanes.     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

Structure and defects at Y2BaCuO5 interfaces in melt-textured YBa2Cu3Ox superconductors

Y₂BaCuO₅ (211) inclusions are prominent microstructural features found in melt-textured YBa₂Cu₃O_x (123) superconductors. These particles are of interest because the 123/211 interfaces and the interface-associated defects have been proposed to be flux pinning centers. In addition, the 211 particles are believed to be heterogeneous nucleation centers of dislocation which can increase the critical current density of 123. Unfortunately, only limited studies have been performed on these particles to ascertain their roles in flux pinning. In this investigation, 211 particles, the interfacial structure and defects in undeformed and mechanically deformed melt-textured 123 have been studied by transmission electron microscopy. It was found that there appears to be a preferred orientation between large oblong 211 particles and the 123 matrix. In addition, while the 123/211 interfaces in undeformed 123 are sharp and relatively undistorted, the interfaces in deformed 123 samples are much thicker. Also, the distribution of strained regions and dislocations around oblong 211 particles in undeformed 123 is nonuniform; the interfaces of low surface curvature are relatively free of defects while the surfaces of high curvature are abundant in dislocations. In contrast, the 123/211 interfaces in deformed 123 samples contain high density of dislocations regardless of interface curvature.     

Pulsed gas lenses

The concept of a pulsed gas lens is proposed. Potential applications are envisaged and preliminary experiments with pulsed ray refraction are reported.     

Logarithmic asymptotics of solutions of the large deviation problem for the boltzmann equation with small transfer of momentum

For the Boltzmann equation with small transfer of momentum, we derive a system of nonlinear integral-differential equations describing the logarithmic asymptotics of the solution to the Cauchy problem in the domain at the distanceO(1) from the support of the initial condition.Translated fromMatematicheskie Zametki, Vol. 64, No. 1, pp. 73–94, July, 1998.This research was partially supported by INTAS-RFBR under grant No. 95-91 in the case of the first author, and by INTAS under grant No. 96-0698 in the case of the second author.