The Chemistry of Simple Phosphorus-Carbon Compounds

With the aid of selected examples an overview is given of the development trends in phosphoruscarbon chemistry over the past few years. An attempt is made to demonstrate the relationships between various parameters and properties such as constitution, basicity, substitution by functional groups, reaction behavior etc. of the compounds. In the case of basis compounds containing methylphosphorus groups the state of development of industrially interesting processes is also outlined. In addition, the synthesis of a few bifunctional phosphorus-carbon compounds which can be employed as comonomers in the production of polymers is described.     

Retention characteristics of volatile compounds on tenax TA

The chromatographic separation properties of long, thin adsorption tubes enable substance-specific quantitative enrichment and reduction to be achieved when sampling and thermal desorption are carried out in the same flow direction. The specific retention volumes, and also the breakthrough and peak end volumes, of 69 compounds in the boiling range between-164 and 126°C and of a relative molecular mass between 16 and 119 were determined at temperatures between 30 and 130°C: normal alkanes, isoalkanes, cycloalkanes, alkenes, polyenes, alkynes, aromatics, ethers, alcohols, aldehydes, ketones, carboxylic acids and their esters, nitroalkanes, O-heterocycles, S-heterocycles, chloroalkanes, water, nitrogen monoxide, nitrogen dioxide, carbon dioxide, and sulfur dioxide. The correlation between adsorbent temperature and specific retention volume of these components, presented in the form of diagrams, permits the required quantity of adsorbent to be determined for a given sample volume. Contrary to literature sources, even extremely volatile compounds such as propane, propene, methanol, formaldehyde, formic acid, and chloromethane can be quantitatively retained on Tenax provided the operating conditions are appropriately selected.     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

The new ether derivative of phenylpropanoid and bioactivity was investigated from the leaves of Piper betle L.

Abstract

A new ether derivative of phenylpropanoid compound, γ-(γ′-isohydroxychavicol)-chavicol octanyl ether (K1) along with one known phenylpropanoid named allyl-pyrocatechol or hydroxychavicol (2) were isolated from Piper betle var. kali collected from Tumluk district, West Bengal India. We first report the presence of compound K1 in the genus Piper. Their structures were established on the basis of various spectroscopic analyses. Compounds K1 and 2 showed excellent antioxidant DPPH free radical scavenging activity with IC₅₀ values of 4.61 and 4.12?µg/mL compared to ascorbic acid as a standard antioxidant drug with IC₅₀ value of 3.42?µg/mL, respectively. Evaluation of in vitro cytotoxic activities of compounds K1 and 2 showed significant effects against human oral cancer cell lines (AW13516 and AW8507), human hepatoma cell lines (HEPG2 and PLC-PRF-5) and a human pancreatic cell line (MIA-PA-CA-2), compared to Doxorubicin^® as a standard cytotoxic drug with GI₅₀ values of <10 and 18.18?µg/mL.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

Iodinated 1,4-naphthoquinones

Iodination of 5-amino- and 6-amino-1,4-naphthoquinones with I₂ and HIO₃ in aqueous dioxane occurs only at the benzoid ring. Depending on the reaction conditions, either aminoiodo- or aminodiiodonaphthoquinones are produced. Diazotization of these compounds followed by reduction or replacement of the diazo group with iodine affords mono- or polyiodo derivatives of 1,4-naphthoquinone. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1465–1469, June, 2005.     

Qualitative estimation of the dependence of the number of energetic compounds on their oxygen coefficient

The ratio between the numbers of structural formulas of C,H,N,O-containing energetic compounds belonging to the classes of fuels (low values of the oxygen coefficientA), explosives (mediumA), and oxidants (highA values) was studied by a computer generation procedure. The number of the theoretically possible structural formulas was found to decrease rapidly on going from fuels to explosives and then to oxidants; this observation agrees with the data on the numbers of various energetic compounds currently used and proposed. The strategy of the search for new compounds with the specified properties is described in brief, and its applicability to the search for explosives and oxidants with a small (up to 12) number of atoms in a molecule is evaluated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1304–1310, July, 1998.     

γ-Zirconium and γ-Titanium Phosphates Platinum Intercalation Compound Preparation, characterization and thermal behaviour

Inorganic ion-exchangers with a layered structure such as γ-zirconium and γ-titanium phosphates, intercalated with organic diamines, are able to exchange Pt²⁺ ions to give new intercalation compounds that can be utilized in heterogeneous catalysis. The experiments performed at different temperatures (25 and 45°C), show different ion uptakes, greater at 45°C and for the materials derived from γ-zirconium phosphate. After platinum exchange, all the materials show an amorphization in the XRD if compared with their precursors. The thermal behaviour of the platinum materials is specific, depending on the exchanger used and the ligand inside the exchanger. Pt²⁺ ion has a catalytic effect on ligand elimination in the γ-zirconium phosphate platinum compounds, but not in those derived from γ-titanium. All the obtained yellow materials show a small step in the TG curves and simultaneously we have the Pt²⁺→Pt⁰ reduction: this is confirmed by XRD registered at the temperatures of the thermal effect, showing peaks at d_hkl=2.27 and 1.95 Å. This revised version was published online in July 2006 with corrections to the Cover Date.     

Principal component analysis of carbon-13 substituent-induced chemical shifts of some unsaturated compounds

Principal component analysis (PCA) is applied to 32 disubstituted unsaturated compounds (Y–CH₂–X): cyanides, oximes and propenes; bearing 12 -substituents: F, Cl, Br, I, OMe, OEt, SMe, SEt, NMe₂, NEt₂, Me, and Et. The experimental ¹³C chemical shifts for the -carbon and functional carbon atoms are correlated with theoretically derived molecular properties, i.e. partial charges, electronegativity, hardness, dipole moments and the nuclear repulsion energies. In the first PCA, the clustering of these three classes of organic compounds occurred mostly because of the chemical shifts and partial charges, and also of the dipole moments, hardness and electronegativity parameters as confirmed by loading graph. A strong grouping is observed in the second PCA, showing the chemical shift dependence on the type of heteroatom substituents. Therefore, sulfur, nitrogen, oxygen and neutral groups exhibit four types of C-13 SCS influences, indicating that the heteroatom (Y) properties play a significant role on the effects on chemical shifts. The -halogenated compounds represent a very heterogeneous group due to possible orbital interactions between the functional group and the substituent. The third PCA shows the grouping of F, Cl, Br and I derivatives, confirming the second PCA results that same halogen presents the same or very similar effects on the chemical shifts.