Preparation of nanometer MgO by sol-gel auto-combustion

Nanometer MgO was prepared via a sol-gel auto-combustion technique using magnesium nitrate as raw material and citric acid as chelating agent. IR spectra of the dried gel were used to investigate the structure of the precursors. By studying the different TG curves of magnesium citrate gel prepared by different methods, we found that a combustion process occurred and the nitrate ions acted as an oxidant in the combustion process. TEM photographs of synthesized powders from the sol-gel auto-combustion showed that the crystallites were uniform in size. In addition, the XRD pattern of this sample showed that the particle size was 8.9 nm. The BET curves, in turn, showed that the specific surface of the sample was 26.34 m²/g. The mechanism of the frothing process in restraining agglomeration is discussed. __________ Translated from Journal of East China Normal University (Natural Science), 2007, (2): 52–57 [译自: 华东师范大学学报(自然科学版)]     

Recent developments in the characterisation of microemulsions

Microemulsions are becoming increasingly complex systems by containing more sophisticated surfactants, polymers, biomolecules, inorganic nanoparticles, etc. The detailed understanding of such more complex systems requires increasingly more refined and comprehensive characterisation. This is typically done by the combination of complementary techniques and is aided by the fact that several experimental methods have been improved (such as electron microscopy) in recent times, new ones have become available (such as fluorescence correlation spectroscopy), and the theoretical understanding of structural data is advancing.     

Inhibitors of biotin biosynthesis as potential herbicides

Isosteric derivatives and analogues of the 7-keto-8-aminopelargonic acid (KAPA), 7,8-diaminopelargonic acid (DAPA) and desthiobiotin (DTB) vitamer intermediates involved in the biosynthetic pathway of biotin were prepared and evaluated as potential herbicides. The most active compound was desmethyl-KAPA which displayed a GR₅₀ (concentration of the active compound that causes a 50% growth inhibition) value of 8 ppm, where values <50 ppm are considered herbicidal. Other KAPA analogs where the terminal Me group was replaced by bulkier substituents such as Et, i-Pr and HOCH₂ showed moderate activity.     

Alkylation and acylation of basic salts of anthranilic acid

The O-nucleophilicity of basic anthranilic acid salts was documented, analyzed, and utilized in synthesis. Specifically substitutions leading to esters instead of secondary amines, and formation of anthranilic acid anhydrides were studied.     

A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

Effect of External Acidity of Mordenite-Supported Catalysts on the 2,2-Dimethylbutane Content in Hydroisomerization Products of n-Hexane

We have used potentiometric titration with tetrabutylammonium hydroxide to determine the acid center content on the outer surface of dealuminated natural and synthetic mordenites. We have established a symbatic relationship between the 2,2-dimethylbutane content in the hydroisomerization products of n-hexane on dealuminated palladium-containing mordenites and the number of their external acid centers. We have studied the possibility of partial deactivation of such centers during ion-exchange deposition of palladium on the catalysts, using a tetraammine palladium solution.     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

Analysis of the characteristics of a two-fiber sensor for monitorship of a turbid medium

Summary Certain characteristics of a two-fiber sensor device, of the type proposed by Papaet al. for sea water turbidity monitorship, are examined. The extension of medium from which most of the received backscattered power originates is investigated, together with possible effects of multiple scattering on the received power. Laboratory measurements testing the results of the analysis are reported.

---

Riassunto Sono esaminate alcune caratteristiche di un sensore a due fibre, del tipo di quello proposto da Papaet al. per il monitoraggio della torbidità dell'acqua di mare. è stata studiata l'estensione della zona del mezzo da cui proviene la maggior parte della radiazione retrodiffusa ricevuta. Sono stati considerati effetti di diffusione multipla. I risultati dell'analisi sono stati controllati con misure in laboratorio.

---

Резюме Исследуются некоторые характеристики дву-qh-нитевого датчика, предложенного Папа и др. для мониторирования мутности морской воды. Исследуется расширение зоны в среде, из которой формируется основная часть рассеянного назад излучения. Также рассматриваются эффекты многократного рассеяния. На основе лабораторных измерений проводится проверка результатов анализа.

     

Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.