A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

Effect of External Acidity of Mordenite-Supported Catalysts on the 2,2-Dimethylbutane Content in Hydroisomerization Products of n-Hexane

We have used potentiometric titration with tetrabutylammonium hydroxide to determine the acid center content on the outer surface of dealuminated natural and synthetic mordenites. We have established a symbatic relationship between the 2,2-dimethylbutane content in the hydroisomerization products of n-hexane on dealuminated palladium-containing mordenites and the number of their external acid centers. We have studied the possibility of partial deactivation of such centers during ion-exchange deposition of palladium on the catalysts, using a tetraammine palladium solution.     

固定化单宁对酒类营养成分的吸附性能研究

采用固定化单宁对酒中可能存在的营养成分蛋白质、氨基酸、糖类、有机酸、乙醇和铁离子等进行吸咐试验。结果表明：固定化单宁对不同营养成分的吸附率差别明显，它通过氢键和疏水作用对蛋白质有较大的吸附率，通过多个酚羟基与中心铁离子形成螯合物而对其有较大的吸附率，对氨基酸、糖、有机酸和乙醇等营养成分或风味物质吸附率不大，固定化单宁可以作为一种较为理想的酒类处理剂。     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

五种氨基酸钆络合物的ESR波谱

迄今未见任何稀土氨基酸络合物的ESR波谱报道,本文在合成Gd³⁺分别与甘氨酸、β-丙氨酸、谷氨酸、天冬氨酸和天冬酰胺五种氨基酸络合物的基础上,测定了不同温度下,水溶液、粉末及分子筛吸附样品的ESR谱,讨论了络合物中晶体场强,对称性及成键特性。     

In vitro screening of the action of non-steroidal anti-inflammatory drugs on hypochlorous acid-induced hyaluronan degradation

The antioxidative effect of two non-steroidal anti-inflammatory drugs was studied in vitro by measuring the kinetics of degradation of high-molecular weight hyaluronan (HA) in a system comprising hypochlorous acid + CuCl₂ + ascorbic acid using a Brookfield rotational viscometer equipped with a Teflon cup and spindle of coaxial cylindrical geometry. The changes in HA chemical structure were investigated by chemiluminometry. When sodium naproxen was added to the system during a running degradative process its inhibitory effect was clearly shown. The inhibition was dependent on the drug concentration. However, when this drug was added to the system before the initiation of HA degradation, no inhibition was seen even at the highest drug concentration tested. The inhibitory effect of acetylsalicylic acid was achieved with a relatively low concentration of the drug and was independent of the experimental model used.     

Analysis of the characteristics of a two-fiber sensor for monitorship of a turbid medium

Summary Certain characteristics of a two-fiber sensor device, of the type proposed by Papaet al. for sea water turbidity monitorship, are examined. The extension of medium from which most of the received backscattered power originates is investigated, together with possible effects of multiple scattering on the received power. Laboratory measurements testing the results of the analysis are reported.

---

Riassunto Sono esaminate alcune caratteristiche di un sensore a due fibre, del tipo di quello proposto da Papaet al. per il monitoraggio della torbidità dell'acqua di mare. è stata studiata l'estensione della zona del mezzo da cui proviene la maggior parte della radiazione retrodiffusa ricevuta. Sono stati considerati effetti di diffusione multipla. I risultati dell'analisi sono stati controllati con misure in laboratorio.

---

Резюме Исследуются некоторые характеристики дву-qh-нитевого датчика, предложенного Папа и др. для мониторирования мутности морской воды. Исследуется расширение зоны в среде, из которой формируется основная часть рассеянного назад излучения. Также рассматриваются эффекты многократного рассеяния. На основе лабораторных измерений проводится проверка результатов анализа.

     

Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.     

Synthesis of the ethyl ester of the mononitrile of malonic acid by the catalytic carbonylation of benzenesulfonyloxyacetonitrile

A new method has been developed for the synthesis of the ethyl ester of the mononitrile of malonic acid by the carbonylation of benzenesulfonyloxyacetonitrile in absolute ethanol in the presence of cobalt carbonyl. The yield of the desired product was 30% with 60–90% conversion of the starting compound. The effects of temperature, pressure, and reaction time were studied.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. S. M. Kirov Urals Polytechnical Institute, Ekaterinburg. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 215–216, January, 1992.