Sodium Alginate and Poly(ethylene glycol) Blends: Thermal and Morphological Behaviors

Sodium alginate (SA) was blended with varying amounts of poly(ethylene glycol) (PEG) viz., 10, 20, 30, 40 and 50 wt % by using water as a solvent. The obtained SA/PEG blends have been characterized for thermal behavior by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) and surface morphology by scanning electron microscopic (SEM) methods. DSC analysis indicates the increase in glass transition temperature (T_g) of the blends with an increase in PEG content in the blend, which is due to chain entanglement. TGA results reveal the enhancement of thermal stability of SA/PEG blends in terms of the onset of degradation and percentage of weight loss. SEM photomicrographs shows the two phase morphology. This result indicates the immiscible nature of the SA/PEG blends.     

Interaction of Naproxen with Crystalline and Amorphous Methylated β-Cyclodextrin in the Liquid and Solid State

Abstract

Interactions of naproxen (NAP) with amorphous, randomly methylated β-cyclodextrin at a degree of substitution per anhydroglucose unit of 1.8 (RAMEB) and with crystalline heptakis-(2,6-di-O-methyl)-β-cyclodextrin (DIMEB) were studied in aqueous solution and in the solid state using, respectively, phase-solubility analysis (at 25 °C, 37 °C and 47 °C) and differential scanning calorimetry (DSC) supported by X-ray powder diffractometry. RAMEB and DIMEB displayed similar solubilizing and complexing abilities towards NAP, suggesting analogous inclusion modes of the drug in the host cavity in aqueous solution. Differences were instead observed in interactions in the solid state, where the amorphizing capacity of RAMEB toward NAP (evaluated by DSC) was about twice that of DIMEB at each drug-to-carrier ratio. Assuming that inclusion complexation is also involved in solid-state interactions, molecular modelling accounted for the experimental results in terms of structural features of DIMEB, i.e. the particular inwards orientation of O-6-C-8 groups of three alternate glucoses on the primary hydroxyl side which hampers a deep penetration of NAP in the DIMEB cavity in the solid state. On the contrary, no obstruction of the cavity apparently occurs with RAMEB due its noncrystalline state. The aqueous dissolution rate of NAP from NAP-RAMEB and NAP-DIMEB blends containing 0.59, 0.73, 0.85, and 0.92 mass fraction of carrier linearly increased at decreasing drug-to-carrier ratios. The improvement was 5 to 20 times (from powders) and 50 to 200 times (from discs) the dissolution rate of NAP alone for both carrier. Therefore the choice of the amorphous RAMEB in pharmaceutical formulations can be recommended mainly for economic reasons, though the anhydrous and non-hygroscopic nature of crystalline DIMEB might be of particular advantage in case of moisture sensitive formulations.     

Study of the Molecular Mobility in Polymers with the Thermally Stimulated Recovery Technique—A Review

Thermally stimulated recovery (TSR) is a non‐conventional mechanical spectroscopy technique that allows to analyse in detail the relaxation processes of polymeric systems in the low frequency region. This work reviews the main aspects and potentialities of this technique. The different kinds of TSR experiments that can be performed, global and thermal sampling (TS) experiments, are described and illustrated with several examples. Also, the different methods for the determination of the thermokinetic parameters (activation energy and pre‐exponential factor) of the thermal sampling (TS) procedure are explained and compared. In this context, the compensation phenomenon, which always appears in TSR results when the studies are performed in the glass transition region of a given system, is discussed. Examples of the application of this technique to different polymeric systems during the last 20 years are provided. An emphasis will be made on the analysis of the effect of crystallinity degree and crosslink density on the TSR response. A comparison between the results (characteristic times and activation energies) obtained by different techniques, namely TSR, dynamic mechanical analysis (DMA), and differential scanning calorimetry (DSC), is made.     

Filler effects on the thermomechanical response of stretched rubbers

This paper deals with the calorimetric analysis of deformation processes in filled styrene-butadiene rubbers. More especially, the study focuses on the effects of the addition of carbon black fillers on the calorimetric response of “demullinized” SBR. Temperature variations are measured by infrared thermography during cyclic uniaxial tensile tests at ambient temperature. Heat sources¹ produced or absorbed by the material due to deformation processes are deduced from temperature fields by using the heat diffusion equation. First, the results show that no mechanical (intrinsic) dissipation is detected for weakly filled SBR, meaning that the heat produced and absorbed over one mechanical cycle is the same whatever the stretch ratio reached. Second, the mechanical dissipation in highly filled SBR is significant. The quantitative analysis carried out highlights the fact that it increases quasi-linearly with the stretch ratio. Finally, a simplified framework is proposed to discuss the identification of the heat sources, in particular the mechanical dissipation.     

Synthesis and thermotropic studies of a novel series of nematogenic liquid crystals 2-(6-alkoxynaphthalen-2-yl)-5-cyanopyridines

A novel series of highly birefringent liquid crystalline compounds, 2-(6-alkoxynaphthalen-2-yl)-5-cyanopyridines (nO-NpPyCN, n?=?2–8) that have potential as commercially useful, were synthesised using a short two-step reaction with overall yields between 55% and 85%. Spectral analyses were in accordance with the expected structures. Their thermotropic behaviours were investigated by polarising optical microscopy and differential scanning calorimetry. It was found that the desymmetrised core results in a nematic phase with a broad mesophase range.     

Photosensitive cholesteric copolymers with spiropyran-containing side groups I. Phase behaviour and photo-optical properties

A number of terpolymers were synthesized by copolymerization of nematogenic, chiral and photochromic monomers with different contents of spiropyran photosensitive side groups. The synthesized copolymers possess selective light reflection in the visible region of the spectrum. Action of UV light on planarly-oriented films of the copolymers leads to the formation of the merocyanine form of the dye with a maximum of absorbance coinciding with the selective light reflection peak. The 'degeneration' of the selective light reflection is observed during this process. It was shown that such types of material can be used for reversible information storage; the principal scheme for the processes of optical data recording and reading is suggested.     

Synthesis,characterisation and mesomorphic properties of ester containing aroylhydrazones and their nickel(II) complexes

A new series of mesogenic aroylhydrazone-based ligands, N-[4-(4′-alkoxy)benzoyloxybenzylidene]-N′-[4″-alkoxybenzoyl]hydrazine with either the same or different peripheral alkyl chains, and nickel(II) complexes of some of them have been synthesised. They were characterised by elemental analyses, Fourier transform infrared, proton and carbon nuclear magnetic resonance and ultraviolet-visible spectroscopy. The mesomorphic properties of these compounds were investigated by differential scanning calorimetry and polarising optical microscopy. All the aroylhydrazones, except those with no lateral chains on either end of the molecule and where m?=?n?=?14, 16, exhibit a monotropic or enantiotropic smectic C mesophase, which are almost insensitive to the peripheral alkoxy chain length. The square planar nickel(II) complexes of the ligands show only an isotropic phase at higher temperature (>175°C) and no mesogenic nature is observed. Density functional theory calculations have been performed using the GAUSSIAN-03 program at the Becke, three-parameter, Lee–Yang–Parr level to obtain the stable electronic structure of the ligand.     

Thermal characteristics of dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate in contact with nitrocellulose/nitroglycerine under continuous heat flow

Dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate (TKX-50) and nitrocellulose/nitroglycerine (NC/NG) possess good energy properties, which were widely used in propellants, explosives and pyrotechnics. They are easy to contact with each other during their application and storage. However, their thermal characteristics under continuous heat flow have not been reported yet. Therefore, it is of great practical significance to study the thermal properties of TKX-50/NC/NG (mixture of TKX-50 and NC/NG). In this paper, the thermal characteristics and pressure behaviors of TKX-50/NC/NG, TKX-50 and NC/NG were characterized by high pressure differential scanning calorimetry (HPDSC) and adiabatic scanning calorimetry (ASC). The results showed that TKX-50 and NC/NG can promote each other to decompose under continuous heat flow, especially the thermal decomposition which affected by gases generation and heat feedback was more violent in the confined space. The decomposition peak temperature of TKX-50/NC/NG shifted to low temperature when the heat loss was ignored and the removal of decomposition gas was suppressed. The possible decomposition mechanism of TKX-50/NC/NG was speculated. It was considered that the intermediate products of TKX-50 and NC/NG decomposition under thermal stimulation would react with each other, which promoted TKX-50/NC/NG decomposition in one step at lower temperature. Thus, TKX-50 has high reactivity and high potential risk after contact with NC/NG under continuous heat flow. TKX-50 is not suitable for application with NC/NG. This study provides a reference for the structural design of nitrogen rich explosives and further broadens the researchers’ understanding of the application of TKX-50.     

Relaxation dynamics and fragility during liquid–glass transitions of poly(propylene glycol)s

The acoustic and thermal properties of the liquid–glass transitions of propylene glycol and its oligomers, poly (propylene glycol)s, were studied by temperature modulated DSC and Brillouin scattering. The fragility indices were determined from Angell plots using the observed modulation frequency dependence of the complex heat capacity. The variation in the glass transition temperatures is discussed on the basis of the free volume theory. The relaxation time of the structural relaxation obeys the Vogel–Fulcher law, and its high frequency end is in good agreement with the result of the dielectric measurement in the literature. The correlation between the observed thermal expansion coefficients and the glass transition temperature is discussed based on the free volume theory. The sound velocity and attenuation were accurately determined as a function of the temperature by Brillouin scattering by combination with the refractive index measurement. The relaxation dynamics were discussed by considering the relaxation from segmental motions. All of these physical properties were discussed based on the third-order anharmonicity and the Grüneisen parameter.