Ab Initio Study of the Dehydrogenation of 3-Pyrroline, 2,5-Dihydrofuran and 2,5-Dihydrothiophene

Abstract

The nature of the transition state structures of the decomposition of 3-pyrroline (1), 2,5-dihydrofuran (2) and 2,5-dihydrothiophene (3) were investigated usingab initio Molecular Orbital (MO) and Density Factional Theory (DFT) methods. The energy barrierof the decomposition of compound 1 is smaller than compound 2 and compound 2 is smaller than compound 3. The energy barriers for the decomposition of compounds 1–3 are 46.20, 50.17, and 61.34 kcal mol^?1, respectively, which is calculated by B3LYP/6-31G^*//HF/6-31G^* level of theory. Which is ingood agreement with reported experimental data. Contrary to the previously reported data, the distance between the cis-2-and-5-hydrogen atoms in compound 1 is greater than compound 2. The transition-state structures of the decomposition of compounds 1–3 are formed by interaction of the cis-2-and-5-hydrogen atoms. Also, the rings of compounds 1–3 in the transition state structures are puckered.     

负载型介孔Au/NiO催化剂的制备、表征与光谱特性研究

采用还原法和沉积-沉淀法制备了介孔Au/NiO催化剂,并运用XRD、N2吸附-脱附、UV-Vis、FTIR、和XPS等方法对其进行了表征,考察了制备方法对Au/NiO催化剂物理化学性质和丙烷氧化脱氢制丙烯反应催化性能的影响.实验结果表明Au/NiO催化剂具有一定的低温催化活性,而还原法制备的催化剂催化性能好于沉积-沉淀法制备的催化剂,反应温度350℃时,还原法制备的Au/NiO催化剂的丙烷转化率和丙烯选择性分别达到25.1%和39.8%.制备方法对表面Au的价态分布、颗粒大小及分散度均有影响.催化剂表面Auδ+物种是催化剂的主要活性组分.     

Li3N-LiNH2体系的循环放氢性能

以等物质的量比的Li3N和LiNH2为起始原料,采用高能球磨法制得了Li-N-H体系,并研究了该体系循环放氢性能衰减的主要原因。XRD及FTIR结果表明,Li3N-LiNH2体系经首周吸氢后转变为LiNH2与LiH,在之后的吸放氢循环中,可逆的吸放氢过程发生在LiNH2与Li2NH之间相的转变。放氢动力学结果表明,Li3N-LiNH2体系在280℃下首周放氢量达5.6wt%,100 min内完成总放氢量的86%。但在循环3周后,100 min内的放氢量衰减至初始的36%。SEM及BET结果表明,放氢量的衰减主要是由于样品的烧结所致,但可通过再次球磨使其循环放氢性能恢复。     

Alternative Route for the Synthesis of 6‐Methoxy‐5‐methyl‐α‐tetralone and 6‐Methoxy‐2,5‐dimethyl‐α‐tetralone

The ketoesters 3 and 4, obtained by the condensation of 2‐cyclohexanone carboxylate and 1‐chloro‐3‐pentanone, were heated with 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) to yield the dienones 5 and 6, which on hydrolysis with potassium t‐butoxide and dimethyl sulfoxide afforded tetralin 8. These were converted to tetralone 10 by methylation and oxidation respectively. Further methylation of 10 yielded tetralone 11.     

Synthesis of Betamethasone From the Waste of Thai Agave Sisalana

Synthesis of betamethasone from waste of Thai A. sisalana is described.     

介孔CeNiO催化剂的合成及其丙烷氧化脱氢制丙烯反应性能

以十二烷基硫酸钠（SDS）和三嵌段共聚物P123为混合模板剂,尿素为沉淀剂,采用均匀沉淀法制备了具有介孔结构的NiO和CeNiO催化剂.考察了催化剂的丙烷氧化脱氧反应性能,并利用用N₂吸附-脱附、透射电镜（TEM）、X射线粉末衍射（XRD）和H₂程序升温还原（H₂-TPR）等技术对催化剂进行了表征.活性测试结果表明,在400-450℃范围内NiO和CeNiO催化剂有相似的催化性能,但后者表现出较高的低温（<400℃）催化活性.325℃反应时,纯NiO上丙烯收率仅为3.1%,而5CeNiO(n_Ce/n_Ni=5%)催化剂上丙烯收率高达12.2%.N₂吸附-脱附和TEM结果表明,制备的NiO和CeNiO催化剂均有较大的比表面积且具有虫孔状介孔结构.H₂-TPR结果表明,CeNiO催化剂中由于Ce的存在使得得一部分氧物种的可还原性能明显增强,这可能是该催化剂具有较高催化活性的重要原因.     

离子液体中异丁烷/2-丁烯烷基化反应机理研究

以复合离子液体[Et_3NH]Cl-AlCl_3-CuCl为催化剂,在连续搅拌釜式反应器中进行了异丁烷与2-丁烯烷基化反应;利用氘代异丁烷同位素示踪法研究了催化反应机理。结果表明,在离子液体中异丁烷烷基化的反应诱导期较短;三甲基戊烷产物主要源于异丁烷的自烷基化、丁烷/丁烯的直接烷基化以及C_(12)~+中间体的裂化反应,而大部分二甲基己烷是仲丁基碳正离子与丁烯加成的产物。     

Oxidative reactions of azines. 12. Dehydrogenation and oxidation of 2-methyl-9-phenyl-2,3-dihydro-1H-2-azafluorene

The oxidation of 2-methyl-9-phenyl-2,3-dihydro-1H-2-azafluorene by air, manganese dioxide, and potassium permanganate has been studied. Depending on the nature of the oxidant it was found that this dihydroazafluorene derivative can be dehydrogenated to the indeno[2,1-c]pyridine anhydro base series, be hydroxylated, oxygenated, or undergo fission to a 2-formamidomethyl-substituted indan-1-one. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 724–730, May, 2006.     

载体组成对负载型PtSn/ZSM-5催化剂上丙烷脱氢反应性能的影响

用微型催化反应装置结合吡啶吸附的红外光谱、NH3-程序升温脱附、热重、H2化学吸附和程序升温还原等物理化学手段研究了载体组成对负载型PtSn/ZSM-5催化剂上丙烷脱氢反应性能的影响.结果表明,负载型PtSn/ZSM-5催化剂对丙烷脱氢的催化性能与载体组成密切相关.随着ZSM-5载体中SiO2/Al2O3比的增加,催化剂表面的酸中心总量和强酸中心量逐渐减少.当SiO2/Al2O3摩尔比从45增至108时,催化剂对丙烷脱氢反应的催化活性提高,并且催化剂的积炭量下降.当SiO2/Al2O3摩尔比增至304时,Sn组分与载体ZSM-5之间的相互作用减弱,经H2还原后催化剂中Sn0物种所占的比例增加,导致催化剂H2化学吸附量和丙烷脱氢反应活性下降.     

Composition‐Dependent Reaction Pathways and Hydrogen Storage Properties of LiBH4/Mg(AlH4)2 Composites

Herein, an initial attempt to understand the relationships between hydrogen storage properties, reaction pathways, and material compositions in LiBH₄–x Mg(AlH₄)₂ composites is demonstrated. The hydrogen storage properties and the reaction pathways for hydrogen release from LiBH₄–x Mg(AlH₄)₂ composites with x=1/6, 1/4, and 1/2 were systematically investigated. All of the composites exhibit a four‐step dehydrogenation event upon heating, but the pathways for hydrogen desorption/absorption are varied with decreasing LiBH₄/Mg(AlH₄)₂ molar ratios. Thermodynamic and kinetic investigations reveal that different x values lead to different enthalpy changes for the third and fourth dehydrogenation steps and varied apparent activation energies for the first, second, and third dehydrogenation steps. Thermodynamic and kinetic destabilization caused by the presence of Mg(AlH₄)₂ is likely to be responsible for the different hydrogen desorption/absorption performances of the LiBH₄–x Mg(AlH₄)₂ composites.