Correlation between reduction potential of vanadium-containing heteropolyacid (HPA) catalysts and their oxidation activity for cyclohexanol dehydrogenation

Vanadium-containing H_6+xP₂Mo_18−xV_xO₆₂ (x = 0, 1, 2 and 3) Wells-Dawson heteropolyacid (HPA) and H_3+xPMo_12−xV_xO₄₀ (x = 0, 1, 2 and 3) Keggin HPA catalysts were applied to the vapor-phase dehydrogenation of cyclohexanol. The catalytic oxidation activity showed a volcano-shaped curve with respect to vanadium substitution for both families of HPA catalysts. The Wells-Dawson HPA showed a better catalytic oxidation performance than the Keggin HPA at the same level of vanadium substitution.     

乙苯脱氢制苯乙烯工业催化剂的失活原因

用混合法制备了工业乙苯脱氢催化剂,考察了新鲜催化剂和使用34个月后的催化剂的催化性能,并应用多种表征手段详细研究了所制备的工业催化剂在使用前后体相和表面的变化情况.活性测试结果发现,催化剂使用34个月后,活性下降12%,消炭后催化剂活性有所提高,但很快又恢复到失活后的水平.表征结果发现,积炭、钾的流失和催化剂活性相的烧结都不是导致催化剂失活的根本原因,而助催化剂钾的不均匀分布和催化剂活性相中Fe3 的还原可能是催化剂失活的主要原因.     

不同活性炭上Pt催化剂的分散性及其在甲基环己烷脱氢反应中的催化性能

在不同方法处理的活性炭上采用传统浸渍方法制备了负载Pt催化剂,并考察了其在甲基环己烷脱氢反应中的催化性能.对炭载体的氮吸附和程序升温脱附的表征结果表明,活性炭经过硝酸氧化处理和氢气高温处理后,活性炭的孔结构基本不变,但表面含氧官能团的数量和种类发生了变化.这些不同的表面基团直接影响了Pt粒子在载体上的分散度,进而使催化剂在反应中表现出不同的活性.     

Formation of active phases of Fe/C,Cr/C and Fe–Cr/C catalysts in oxidative dehydrogenation of ethane

The oxidative dehydrogenation of ethane into ethylene using CO₂ as an oxidant at temperatures of 650–750 °C was carried out over Fe/C, Cr/C and Fe–Cr/C catalysts deposited on a carbon support. Before and after the reaction the catalysts were investigated by X-ray powder diffraction (XRD), in situ magnetometry and transmission electron microscopy methods. The correlation between activity of Fe/C, Cr/C and Fe–Cr/C catalytic systems and their phase composition was established.     

高活性铜催化剂无受体乙醇催化脱氢制乙醛研究

相较于Wacker工艺进行乙醛工业化生产,发展多相催化体系实现乙醇直接无氧催化脱氢制乙醛和副产氢气,从生产工艺和经济价值方面无疑是一条更加安全高效的路线.在此,我们发展了一种高效、稳固的Cu/SiO₂催化剂,用于乙醇的无受体催化脱氢.通过氨蒸发法制备得到高度分散的Cu颗粒,在没有任何平衡气体的纯乙醇进料条件下,显示出超强的热稳定性.活性组分Cu和载体SiO₂之间的强相互作用,使其具有优异的催化性能.通过反应条件优化,在250℃下实现了较高的乙醇转化率(>40%)和乙醛选择性(>95%),且催化剂在固定床连续反应过程中可稳定运行超过400 h.     

Novel Flower‐Like Ag‐SiO2‐MgO‐Al2O3 Material: Preparation,Characterization and Catalytic Application in Methanol Dehydrogenation

Catalytic direct dehydrogenation of methanol to formaldehyde was carried out over Ag‐SiO₂‐MgO‐Al₂O₃ catalysts prepared by sol‐gel method. The optimal preparation mass fractions were determined as 8.3% MgO, 16.5% Al₂O₃ and 20% silver loading. Using this optimum catalyst, excellent activity and selectivity were obtained. The conversion of methanol and the selectivity to formaldehyde both reached 100%, which were much higher than other previously reported silver supported catalysts. Based on combined characterizations, such as X‐ray diffraction (XRD), scanning electronic microscopy (SEM), diffuse reflectance ultraviolet‐visible spectroscopy (UV‐Vis, DRS), nitrogen adsorption at low temperature, temperature programmed desorption of ammonia (NH₃‐TPD), desorption of CO₂ (CO₂‐TPD), etc., the correlation of the catalytic performance to the structural properties of the Ag‐SiO₂‐ MgO‐Al₂O₃ catalyst was discussed in detail. This perfect catalytic performance in the direct dehydrogenation of methanol to formaldehyde without any side‐products is attributed to its unique flower‐like structure with a surface area less than 1 m²/g, and the strong interactions between neutralized support and the nano‐sized Ag particles as active centers.     

对硝基苯甲酰芳肼的合成及氧化脱氢研究

取代酰肼化合物是制备偶氮化合物的原料,是一类非常重要的有机化合物,具有广泛的应用价值。它可以和金属形成稳定配合物,对聚烯烃等高分子材料的“铜害”有良好的防护作用,被称为金属减活剂[1];在照相技术方面,苯酰肼类化合物加入氯化银乳胶层中,可提高其光敏感性,使对比度增大     

FeVO4催化剂的原位电导研究

采用盐类固体研磨法制备了FeVO4催化剂,用原位电导方法测定了FeVO4催化剂在氧气 丙烷→氧气→丙烷连续变化气氛下的电导变化,确定其导电类型.以BET、XRD、H2-TPR等技术对催化剂进行表征,研究了其对丙烷氧化脱氢制丙烯反应的催化性能.     

Synthesis,Structure, and Catalytic Activity of Cyclometalated Iridium Complexes with a Bidentate POC Ligand

Synthesis, characterization and catalytic activity of cyclometalated iridium complexes with a bidentate POC ligand is presented. Metalation of POC-H (di-tert-butyl(phenoxy)phosphane) with [Ir(COD)Cl]₂ proceeded rapidly at room temperature and afforded mixture of (POC)(POC-H)IrHCl ( 1 a ) and (POC)(COD)IrHCl ( 1 b ), from which complexes (POC)(L)IrHCl where L=PPh₃ ( 1 c ), bipyridine ( 1 d ) and [2,2′-bipyridine]-6,6′-diol ( 1 e ) were prepared through ligand exchange. The compounds were tested in acceptorless dehydrogenation of 1-phenylethanol and transfer dehydrogenation of ethanol in a context of comparison with pincer counterparts (POCOP)IrHCl and (PCN)IrHCl. An attempt to prepare a dihydride complex from 1 e led to dimeric complex [(POC)(bipy-diol−)IrH]₂ ( 3 ) that could explain the low activity of 1 e . DFT studies provided insight into POC-H vs POCOP-H metalation mechanism.