Acceptorless Photocatalytic Dehydrogenation of Furfuryl Alcohol (FOL) to Furfural (FAL) and Furoic Acid (FA) over Ti3C2Tx/CdS under Visible Light

Acceptorless photocatalytic dehydrogenation is not only a promising alternative to photocatalytic water splitting for hydrogen generation but also provides a green and sustainable strategy for the synthesis of value-added organic compounds. In this work, Ti₃C₂T_x/CdS nanocomposites were obtained by self-assembly of hexagonal CdS in the presence of preformed Ti₃C₂T_x nanosheets, which serves as a photocatalyst for acceptorless dehydrogenation of biomass-derived furfuryl alcohol (FOL) to furfural (FAL) and furoic acid (FA) in neutral and alkaline medium respectively, with simultaneous generation of stoichiometric hydrogen under visible light. Ti₃C₂T_x MXene acts as an efficient cocatalyst for the photocatalytic dehydrogenation of FOL over CdS, with an optimum performance achieved over 0.50 wt% Ti₃C₂T_x/CdS nanocomposite. This study provides an economic and sustainable strategy for the simultaneous valorization of biomass-derived FOL to produce FAL and FA as well as the production of clean energy hydrogen under mild condition based on noble metal-free semiconductor-based photocatalysts.     

CH4 dissociation on Co（0001）: A density functional theory study

CH4 dissociation on Co(0001) surfaces is an important step, which has been investigated at the level of density functional theory. It is found that CH4 is unfavorable to adsorb on Co(0001), while CH4 favores to dissociate to CH3, CH2 and CH on Co(0001) surface by sequential dehydrogenation. In the whole process of CH4 dehydrogenation, CH4 dissociate to CH3 and H is the rate-determining step. The calculated results show that CH2 and CH exist mainly on Co(0001) surface, while the dehydrogenation of CH into C and H is difficult.     

H-ZSM-5分子筛上环己烯芳构化反应历程的理论研究

基于76T簇模型,采用量子力学和分子力学联合的ONIOM2(B3LYP/6-31G(d,p):UFF)方法研究了H-ZSM-5分子筛上环己烯芳构化反应历程.结果表明,环己烯首先吸附在分子筛酸性位上,与酸性质子共同脱除一个H2分子后,在分子筛骨架氧上生成烷氧配合物中间体;然后再脱质子得到环己二烯,同时酸性位复原;再经历脱氢和脱质子历程,最后得到产物苯,并吸附在复原的分子筛酸性位上.计算得到脱氢的活化能依次为279.64和260.21kJ/mol,脱质子的活化能依次为74.64和59.14kJ/mol.所有脱氢反应都是吸热过程,生成表面烷氧活性中间体,随后的脱质子反应能垒较低,而且是放热过程.此外,比较了环己烯在分子筛酸性位上的三个竞争反应,即脱氢、质子化和氢交换反应的活化能垒,证明环己烯优先发生脱氢反应.     

Dienone—phenol Rearrangement of C—9 Oxygenated Decalinic Dienone and Analogs through B—Ring Cleavage

Dehydrogenation of 9-hydroxy decalinic enones and analogs with DDQ resulted in a formal dienone-phenol type rearrangement via B-ring cleavage, while the corresponding dienone acetates underwent base-catalyzed formal dienone-phenol type rearrangement analogously.     

Ni-Pt/γ-Al2O3催化剂用于甲基环己烷催化脱氢的研究

采用自制的比表面积为349 m²/g的纳米膜γ-Al₂O₃为载体,用等体积浸渍法制备了Ni-Pt/γ-Al₂O₃催化剂,采用比表面积测定、X射线衍射、扫描电镜和透射电镜等手段对所制备的催化剂进行了表征。利用微型连续管式反应器与气相色谱联用装置,考察了Ni-Pt/γ-Al₂O₃催化剂对甲基环己烷(MCH)气相脱氢的催化性能。结果表明,使用20%Ni-0.5%Pt/γ-Al₂O₃催化剂,在反应温度350℃,混合进样体积空速252 h^-1条件下,甲苯转化率达到96.99%,选择性接近100%。     

Iridium‐Catalyzed Dehydrogenative Decarbonylation of Primary Alcohols with the Liberation of Syngas

A new iridium ‐ catalyzed reaction in which molecular hydrogen and carbon monoxide are cleaved from primary alcohols in the absence of any stoichiometric additives has been developed. The dehydrogenative decarbonylation was achieved with a catalyst generated in situ from [Ir(coe)₂Cl]₂ (coe=cyclooctene) and racemic 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (rac‐BINAP) in a mesitylene solution saturated with water. A catalytic amount of lithium chloride was also added to improve the catalyst turnover. The reaction has been applied to a variety of primary alcohols and gives rise to products in good to excellent yields. Ethers, esters, imides, and aryl halides are stable under the reaction conditions, whereas olefins are partially saturated. The reaction is believed to proceed by two consecutive organometallic transformations that are catalyzed by the same iridium(I)–BINAP species. First, dehydrogenation of the primary alcohol to the corresponding aldehyde takes place, which is then followed by decarbonylation to the product with one less carbon atom.     

Oxidative dehydrogenation of propane over Ni-Mo-Mg-O catalysts

In this work, a series of Ni-Mo-Mg-O catalysts with mesoporous structure prepared by sol-gel method were investigated for the oxidative dehydrogenation of propane (ODHP). The techniques of temperature-programmed reduction with H2 (H2-TPR), N2 adsorption-desorption, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectra (XPS) were employed for catalyst characterization. It is found that the activity of the catalysts for ODHP increases first and then decreases with the increase of Mo content. The catalyst with a Mo/Ni atomic ratio of 1/1 exhibits the best catalytic activity, which gives the propene selectivity of 81.4% at a propane conversion of 11.3% under 600°C and maintains the good catalytic performance for 22 h on stream. This is related not only to its high reducibility and dispersion as revealed by TPR and XRD, but also to the formation of more selective oxygen species on the MoOx-NiO interface as identified by XPS.     

异丁烷-丁烯烷基化反应催化剂的研究

固体强酸;异丁烷-丁烯烷基化反应催化剂的研究