Electrospun Fibrous Membranes of Modified Polystyrene and its Copolymer With Butyl Acrylate and Their Respective Adsorption Capabilities for Cationic Blue and Copper Ions

Cationic dyes and metal ions in wastewater are considered as environmental pollutants. In order to treat these pollutants individually polystyrene (PS) and poly (styrene-co-butyl acrylate) (P(St-co-BA)) were first electrospun into fibrous membranes with a porous structure and then two simple modification methods were adopted to introduce -SO₃H and -COO^? groups into the PS fibrous membranes' and the P(St-co-BA) fibrous membranes' surfaces, respectively; finally the modified samples were used individually to adsorb either cationic blue dyes or copper ions, respectively. The results showed that the PS fibrous membranes were hydrophobic before modification but they became hydrophilic after modification due to the introduction of -SO₃H. Then the modified PS fibrous membranes had the capability to adsorb cationic blue dyes from water, and their adsorption efficiency, with an adsorption time of 300 min, reached 68.1%. For the P(St-co-BA) fibrous membranes, the -COO^? groups were introduced into their surfaces after hydrolysis in alkali lye; however, they showed very weak adsorption capability for copper ions due to the loss of the fiber-web structure. In addition, the thermal properties of the fibrous membranes before and after modification were analyzed, and the morphology was also observed by field emission scanning electron microscopy.     

Synthesis and Crystal Structure of Ethoxyethyl 3-(2-chloro-5-pyridyl methylamino)-2-cyano-3-methylthio acrylate

１ＩＮＴＲＯＤＵＣＴＩＯＮＡｍｏｎｇｔｈｅｗｉｄｅｖａｒｉｅｔｙｏｆｐｈｏｔｏｓｙｓｔｅｍＩ（ＰＳＩ）ｐｈｏｔｏｓｙｎｔｈｅｔｉｃｅｌｅｃｔｒｏｎｔｒａｎｓ ｐｏｒｔｉｎｈｉｂｉｔｏｒｓ,ｔｈｅｈｉｇｈｌｙｐｏｔｅｎｔｃｙａｎｏａｃｒｙｌａｔｅＰＳＩ...     

溶胶-凝胶法制备丙烯酸甲酯-衣康酸酐共聚物/SiO_2杂化材料

以丙烯酸甲酯（ ＭＡ） 和衣康酸酐（Ｉｔｎ） 的无规共聚物和原硅酸四乙酯（ＴＥＯＳ） 作为有机相与无机相前驱体,以３ 氨丙基三乙氧基硅烷（ＡＰＴＥＳ） 为偶联剂,通过溶胶 凝胶过程制备出有机 无机杂化材料．并通过ＳＥＭ、ＤＳＣ 等方法考查了偶联剂用量对所得材料结构及性能的影响．     

Dual-cure processes: towards deformable crosslinked coatings

Two dual-cure processes consisting of a UV-initiated radical polymerization followed by either a UV-induced cationic polymerisation, or a thermal addition reaction, were investigated. The feasibility of the processes was studied using an acrylate-oxetane monomer for the UV/UV combination, and an acrylated oligoester for the UV/Heat combination. It was shown by FTIR and Tg measurements, that both steps of each process could be performed efficiently and separately. This allowed the production of a deformable partially cured coating, whose cure can then be completed, leading to the required final properties. Furthermore, it was demonstrated that the increase of the functionality of the reactive diluent led to a decrease of the thermal crosslinking extent. This is probably due to the reduced mobility of the reactive species that is caused by an enhanced UV crosslinking taking place during the first step.     

Simple and effective one‐pot synthesis of (meth)acrylic block copolymers through atom transfer radical polymerization

The synthesis of di‐ and triblock copolymers using atom transfer radical polymerization (ATRP) of n‐butyl acrylate (BA) and methyl methacrylate (MMA) is reported. In particular, synthetic procedures that allow for an easy and convenient synthesis of such block copolymers were developed by using CuBr and CuCl salts complexed with linear amines. Polymerizations were successfully conducted where the monomers were added to the reactor in a sequential manner. Poor cross‐propagation between poly(n‐butyl acrylate) (PBA) macroinitiators and MMA was minimized, and therefore control of molecular weights and distributions was realized, by using halogen exchange—a technique involving the addition of CuCl to the MMA during the chain extension of the PBA macroinitiator. High molecular weight (M_n ∼ 90,000) and low polydispersity (M_w /M_n < 1.35) ABA triblock copolymers were also prepared and their structure and properties in bulk have been preliminary characterized indicating the potential of ATRP for the production of all‐acrylic thermoplastic elastomers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2023–2031, 2000     

Interface characterization in latex blend films by fluorescence energy transfer

Immiscible polymer blend films were formed by air drying aqueous dispersions containing mixtures of a high-T_g latex, poly(methyl methacrylate), and a film-forming low-T_g latex, poly(butyl methacrylate-co-butyl acrylate). Fluorescence energy transfer experiments were used to characterize the interfaces in these films, in which one component was labeled with a donor dye and the other with an acceptor. The quantum efficiency of energy transfer (Φ_ET) between the donors and acceptors is influenced by the interfacial contact area between the two polymer phases. As the amount of soft component in the blend is increased, Φ_ET approaches an asymptotic value, consistent with complete coverage of the hard polymer surface with soft polymer. This limiting extent of energy transfer is very sensitive to the total surface area in the film, with correspondingly more energy transfer at constant volume fraction for small hard particles. Some of the details of the energy transfer are revealed through a fluorescence lifetime distribution analysis. The presence of ionic surfactant (sodium dodecyl sulfate) in the dispersion from which the latex blend film is prepared reduces the cross-boundary energy transfer by 30%, which implies that in these films the surfactant decreases the interfacial contact. After annealing the surfactant-free blends above 100°C, we observe an increase in energy transfer, consistent with a broader interface between the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1115–1128, 1998     

Hydrogen bonds in silk fibroin-poly(acrylonitrile-co-methyl acrylate) blends: FT–IR study

FT–IR spectroscopy was used to study the specific interactions in polyacrylonitrile-silk fibroin (PAN–SF) and poly(acrylonitrile-co-methyl acrylate)-silk fibroin (PANMA–SF) blends. No specific interaction was found in PAN–SF blends. In PANMA–SF blends, however, a new 1703 cm⁻¹ band, assigned to be hydrogen-bonded carbonyl groups of PANMA, appears, and its intensity depends on the compositions of the blends and the MA contents in PANMA. Furthermore, when the sample was heated, considerable changes in position and intensities of the hydrogen-bonded bands, in both stretching regions of the carbonyl group of PANMA and the hydroxl group of SF, were found, and these changes were irreversible on cooling. Finally, we suggested that the bands of hydrogen bonds in PANMA–SF blends may be the average result of several kinds of possible hydrogen bondings. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1405–1414, 1997     

Butyl acrylate batch emulsion polymerization in the presence of sodium lauryl sulphate and potassium persulphate

The batch emulsion polymerization of butyl acrylate in the presence of sodium lauryl sulphate as emulsifier and potassium persulphate as initiator was investigated. The effects of emulsifier concentration, initiator concentration, and monomer/water ratio on the kinetic features were studied. The kinetic data showed that at the conditions studied, the number of particles is proportional to [KPS]^0.39 and [SLS]^0.54. The number of particles did not practically vary with monomer concentration at the high range of monomer and emulsifier concentrations. At low emulsifier concentration, particle coagulation occurred in the course of reaction, which increased with monomer concentration. Particle nucleation was found to occur during Interval III of the batch process if undissociated micelles exist. It was also confirmed that the zero-one kinetics system can better fit the experimental results, compared to the pseudobulk kinetics. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3957–3972, 1999     

Synthesis and cyclopolymerization of novel allyl‐acrylate quaternary ammonium salts

Novel allyl‐acrylate quaternary ammonium salts were synthesized using two different methods. In the first (method 1), N,N‐dimethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium bromide and N,N‐dimethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide were formed by reacting tertiary amines with allyl bromide. The second (method 2) involved reacting N,N‐dialkyl‐N‐allylamine with either ethyl α‐chloromethyl acrylate (ECMA) or tert‐butyl α‐bromomethyl acrylate (TBBMA). The monomers obtained with the method 2 were N,N‐diethyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride, N,N‐diethyl‐N‐2‐(tert‐butoxycarbonyl)allyl allylammonium bromide, and N,N‐piperidyl‐N‐2‐(ethoxycarbonyl)allyl allylammonium chloride. Higher purity monomers were obtained with the method 2. Solution polymerizations with 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) in water at 60–70°C gave soluble cyclopolymers which showed polyelectrolyte behavior in pure water. Intrinsic viscosities measured in 0.09M NaCl ranged from 0.45 to 2.45 dL/g. ¹H‐ and ¹³C‐NMR spectra indicated high cyclization efficiencies. The ester groups of the tert‐butyl polymer were hydrolyzed completely in acid to give a polymer with zwitterionic character. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 901–907, 1999     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999