Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

氨酯丙烯酸酯树脂的合成及其固化反应动力学研究

用不同分子量的聚氧化丙烯二元醇合成了一系列氨酯丙烯酸酯齐聚物（ＵＡＯ）以及含硬段／软段结构的ＵＡＯ，并用ＦＴ－ＩＲ跟踪了这类ＵＡＯ的合成过程。通过ＵＡＯ的链端双键测定，以及ＧＰＣ、ＶＰＯ测定的分子量，表征了ＵＡＯ的数均官能团度。进一步通过ＦＴ－ＩＲ研究了由ＵＡＯ与甲基丙烯酸甲酯形成的氨酯丙烯酸酯树脂（ＵＡＲ）固化时的共聚反应动力学，发现其共聚反应速率与体系中的扩散效应密切相关。在这类ＵＡＯ中引入硬段后，共聚合体系呈现出反常的动力学行为，与网络结构形成过程中材料的形态发展有关。     

Polymerization of Blending Cholesteryl Acrylate and Methyl Phenyl Benzoyl Acrylate

Liquid crystal is a material which is between solid and liquid phase and commonly called mesophase. Blends of liquid crystal are of great interest because of their unique optical properties. Blending in this study using two monomers of liquid crystal were cholesteryl acrylate and methyl phenyl benzoyl acrylate. The polymerization process using uv curing techniques by irradiation UV ray and without irradiation UV ray. Polymerization of blending liquid crystal acrylate using initiator 2-hydroxy-2-methyl-1-phenylpropane. Based on peak at GPC curve of polymerization by irradiation UV ray, type of that polymer is copolymer. Therefore the polymerization without UV ray, type of that polymer is homopolymer. SEM images of liquid crystal acrylate polymer showed lamella chain models that are characteristic of a polymer chains. Type of polymer liquid crystal acrylate was the type of Side Chain Liquid Crystalline Polymers (SCLCPs). Therefore acrylate polymer liquid crystal in this research has semi-crystalline phase, which contained crystalline phase and amorphous phase on the XRD pattern. The results of FT-IR spectroscopic characterization of the two monomers showed a peak at the wave number of 1600.43 cm ^-1 and 1622.86 cm^-1 which indicates a double bond (C=C) were obtained from acrylation. While the spectroscopy on the product blending the wave number of the peak regions is reduced that shows that carbon double bonds (C=C) in the acrylate group has polymerized. It also strengthened with a very sharp peak for CC functional groups on the wave number of 2855.15 cm^-1. The results of this study indicate that the liquid crystal polymer acrylic polymerization results with radiation UV ray and without UV ray, respectively absorb light in the UV wavelength region 363 nm and 351 nm.     

基于石墨烯的毒死蜱分子印迹电化学传感器的制备及对毒死蜱的测定

利用分子印迹技术,以马来松香丙烯酸乙二醇酯为交联剂,使用自由基热聚合法在石墨烯修饰的玻碳电极表面合成毒死蜱( CPF)分子印迹聚合膜,制得了CPF分子印迹电化学传感器。采用循环伏安法、线性扫描伏安法和电化学交流阻抗法等,考察了此CPF分子印迹膜的电化学性能。在最佳检测条件下,传感器的峰电流与CPF浓度在2.0×10-7~1.0×10-5mol/L范围内呈线性关系,线性方程为Ip(μA)=-7.1834-0.2424C (μmol/L),相关系数r2=0.9959,检出限为6.7×10-8 mol/L(S/N=3)。构建了CPF分子印迹电化学传感器的动力学吸附模型,测得印迹传感器的印迹因子β=2.59,结合速率常数k=12.2324 s。传感器表现出良好的重现性和稳定性,并成功用于实际水样和蔬菜样品中CPF的测定,加标回收率为94.1%~101.4%。     

碳纳米管-聚丙烯酸乙酯复合乳液的制备及其润滑性能研究

采用乳液聚合方法合成了碳纳米管一聚丙烯酸乙酯(CNTs—PEA)复合乳液;采用JEM100XI型透射电子显微镜(TEM)观察了复合乳液的微观形貌;采用MQ-800型四球摩擦磨损试验机和MM-200型环一块摩擦磨损试验机考察了CNTs—PEA复合乳液作为水基润滑添加剂的摩擦学性能;并采用JSM-35型扫描电子显微镜(SEM)分析了磨斑表面．结果表明,CNTs—PEA复合乳液在极低浓度下即可有效地提高水基液的承载能力和抗磨性能．     

预聚物复合助稳定剂条件下含氟丙烯酸酯共聚物的细乳液聚合

以甲基丙烯酸三氟乙酯(TFMA)、苯乙烯(St)和丙烯酸丁酯(BA)为共聚单体,在十二烷基硫酸钠(SDS)/磺酸盐型阴离子氟表面活性剂(S100)/辛基苯基聚氧乙烯醚(OP-10)组成的乳化体系中,采用预聚物和十六醇(HDL)共同组成的复合助稳定剂,对细乳液聚合制备St/BA/TFMA三元共聚物的过程进行了研究.通过F...     

Novel molecularly imprinted polymer using 1-(α-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography

Novel water-compatible molecularly imprinted polymers were synthesized in methanol-water systems with Tratarzine as template and 1-(α-methyl acrylate)-3-methylimidazolium bromide (1-MA-3MI-Br) as functional monomer, which has π-π hydrophobic, hydrogen-bonding and electrostatic interactions with template molecule. 1-MA-3MI-Br molecularly imprinted polymers (1-MA-3MI-Br-MIPs) were used as selective sorbents for the solid-phase extraction (SPE) of water-soluble acid dyes from wastewater and soft drink. The good linearity of the method was obtained in a range of 5.0-2000 μg/L with the correlation coefficient of > 0.999. The detection limits were in a range of 0.13-0.51 μg/L for the water-soluble acid dyes in wastewater and 0.095-0.84 μg/L for those in soft drink. The mean recoveries for the acid dyes are from 89.1% to 101.0% in spiked wastewater and 91.0-101.3% in spiked soft drink. Compared with strongly anion exchange solid phase extraction (SAX-SPE), mixture anion exchange solid phase extraction (MAX-SPE), and 1-MA-3MI-Br non-imprinted solid phase extraction (1-MA-3MI-Br-NISPE), almost all of the matrix interferences were removed by 1-MA-3MI-Br-MISPE, exhibiting higher selectivity, recovery and enrichment ability for the acid dyes and better baselines in the results of HPLC analysis.     

BoPhoz类膦-氨基膦配体在Rh-催化β-脱氢氨基酸酯的不对称氢化反应中的应用

将BoPhoz类膦-氨基膦配体应用在Rh-催化β-脱氢氨基酸酯的不对称氢化反应中,考察了配体结构及反应条件对反应结果的影响,并在优化的条件下研究了各种底物的适用范围,产物的对映选择性达81％ee．     

Preparation and properties of water‐absorbent composites of chloroprene rubber,starch, and sodium acrylate

The effects of the amounts of starch, sodium acrylate (NaAA) and dicumyl peroxide (DCP) on the properties of chloroprene rubber (CR)/starch/NaAA composites prepared by melting method were investigated. The results showed that the addition of starch improved the mechanical properties, but decreased the water‐absorbing capacity of the composite, most likely due to the decrease in the local concentration of the main water‐absorbing material sodium polyacrylate and the increase in crosslinking density of the composite resulting from the reaction between starch and CR. This reaction was verified by the vulcanized curves, DSC curves, and the cut surface morphology. The as‐prepared composite demonstrated higher water‐absorbing capacity, resulting from the incorporation of NaAA. The mechanical properties decreased with increasing the DCP loading, and the water‐absorbing ratio is the maximum at 1.0 phr DCP. The tensile strength of the composite decreased significantly after water immersion, due to the absorbed water acting as a plasticizer. The extracted component from composites after water immersion is mainly sodium polyacrylate according to Fourier transform infrared (FT‐IR) spectroscopy analysis. The morphology of the composites before and after water immersion was observed by optical transmission microscopy (OTM). The results indicated that the starch exhibits a good dispersion state, and the water‐absorbing capacity results primarily from sodium polyacrylate. Copyright © 2010 John Wiley & Sons, Ltd.