Rapid qualitative analysis of metallic alloys by electrospot chromatography

Summary Electrography and paper chromatography were combined to analyse rapidly metallic alloys in an almost non destructive technique. Using anodic dissolution the sample is applied on the start point of the chromatographic paper. Known ketones-HCl-water mixtures are usually used as solvents to analyse electrospots of different alloys and metal coatings and a separate electrospottest is recommended for Cr. Results of qualitative analysis of some steels, Cu–Ni, and Pb alloys are presented.     

Optimisation of a flow injection system with electrochemical detection using the desirability function: Application to the determination of hydroquinone in cosmetics

A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described. Size and coefficient of variation of the signal are optimised by a desirability function and a central composite design. The robustness of the optimum reached in the optimisation step is evaluated by means a Plackett-Burman design. The optimised FIA system is able to determine hydroquinone with a minimum detectable net concentration of 10 μg l⁻¹ with a false positive probability of 0.05 and a false negative probability less than 0.05. In samples of bleaching cream, the proposed procedure has a recovery of 102.2% with standard deviation of 4.4% and a relative error of 6.2%.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Analysis and Speciation of Traces of Arsenic in Environmental,Food and Industrial Samples by Voltammetry: a Review

Voltammetric approaches for the determination of arsenic and speciation at trace levels are critically appraised in a review covering the literature from 1970 to 2002. Special attention is devoted to stripping modes and to issues related to the choice of working material and supporting electrolyte. A section is dedicated to the management of real samples and aspects of sample preparation. An extensive compilation, organized by real sample type, gathers essential experimental conditions. Potentiometric stripping analysis is introduced for sake of comparison. The coupling of voltammetric detection or preaccumulation with FIA, chromatography, capillary electrophoresis and ICP techniques is also addressed.     

流动注射电化学发光测定维生素B1的研究

基于发现在强碱性介质维生素 B1对电生BrO-氧化Luminol的强化学发光有很强的抑制作用, 将在线恒电流电解产生BrO-与流动注射技术结合,建立了流动注射电化学发光测定维生素B1的新方法.该方法测定维生素B1的线性范围为1.0×10-8～6.0×10-6g·ml-1,检出限为3.2×10-9g·ml-1,相对标准偏差为1.2%(n=11).该法具有灵敏度高,可控性强等优点,用于片剂中的维生素B1含量测定,结果满意.     

Analysis of dissolution test sample solutions by high speed capillary electrophoresis

Summary The quantitative use of high speed capillary electrophoresis (HSCE) is examined by applying high voltages across short capillaries. Acceptable performance in terms of injection precision and migration times were achieved within 1–2 minute analysis times. HSCE was used for the novel CE application of dissolution test sample solution analysis. The results generated by HSCE compared well with those generated using validated on-line UV absorbance measurements. It is concluded that HSCE is a viable alternative and supplement to standard analytical methods employed in dissolution test analysis.     

Structure and conformational features of tetrahydrothienothiepinoisoxazole as a novel heterocyclic system

The crystal and molecular structure of a novel heterocyclic system, 8-methyl-3,3a,4,5-tetrahydrothieno[3,2:6,7]thiepino[4,5-c]isoxazole, has been determined by X-ray analysis. The seven-membered ring has the boat conformation (B), while the isoxazoline cycle has the flat chair conformation (₃E). There are strong steric strains between the vicinal protons at the C(3a), C(3), and C(4) atoms.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1795–1797, October, 1994.     

速差动力学分析及其应用进展

速差动力学分析是不经分离同时或连续测定混合物中性质密切相关的多组份的重要方法。本文综述了该法在１９８９－１９９２年间国内外新进展，尤着重其在有机，生物混合物中多组份分析的应用及新的计算方法，化学计量学的引入。引用最新文献６７篇。     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.