Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(trimethylene terephthalate)/poly(ether imide)

Miscibility and morphology of poly(ethylene 2,6-naphthalate)/poly(trimethylene terephthalate)/poly(ether imide) (PEN/PTT/PEI) blends were investigated by using a differential scanning calorimeter (DSC), optical microscopy (OM), wide-angle X-ray diffraction (WAXD), and proton nuclear magnetic resonance (¹H-NMR). In the ternary blends, OM and DSC results indicated immiscible properties for polyester-rich compositions of PEN/PTT/PEI blends, but all compositions of the ternary blends were phase homogeneous after heat treatment at 300 °C for more than 30 min. An amorphous blend with a single T _g was obtained in the final state, when samples were annealed at 300 °C. Experimental results from ¹H-NMR identified the production of PEN/PTT copolymers by so-called “transesterification”. The influence of transesterification on the behaviors of glass transition and crystallization was discussed in detail. Study results identified that a random copolymer promoted the miscibility of the ternary blends. The critical block lengths for both PEN and PTT hindered the formation of crystals in the ternary blends. Finally, the transesterification product of PEN/PTT blends, ENTT, was blended with PEI. The results for DSC and OM demonstrated the miscibility of the ENTT/PEI blends.     

Cellulose acetate and polyethersulfone blend ultrafiltration membranes. Part I: Preparation and characterizations

The overall objective of this investigation is to achieve high‐performance membranes with respect to flux and rejection characteristics, with an interplay of blending polymers having desired qualities. Thus, cellulose diacetate and polyethersulfone as candidate materials, in the presence of polyethylene glycol 600 as a pore forming agent, were blended in 100/0, 95/5, 90/10, 85/15, 80,20 and 75/25% compositions using N,N′‐dimethylformamide as solvent and membranes were prepared by the phase inversion technique. Polymer blend composition, additive concentration, and casting and gelation conditions were standardized for the preparation of asymmetric membranes with various pore statistics and morphology. These blend membranes were characterized for compaction in ultrafiltration experiments at 414 kPa pressure in order to attain steady state flux and is reached within 4–5 hr. The pure water flux was measured at 345 kPa pressure and is determined largely by the composition of polyethersulfone and additive concentration. The flux was found to reach the highest values of 66.5 and 275 1/(cm² hr) at 0 and 10 wt% additive concentrations respectively, at 25% SPS content of the blend. Membrane hydraulic resistance derived by measuring water flux at various transmembrane pressure and by using an algorithm was found to be inversely proportional to pure water flux. Water content is estimated by simple drying and weighing procedures and found proportional to pure water flux for all the membranes. The molecular weight cut‐offs (MWCOs) of different membranes were determined with proteins of different molecular weights and found to vary from 20–69 kDa (globular proteins) depending on the PEG and SPS content in the casting dope. Skin surface porosity of the membranes were analyzed by scanning the frozen membrane samples using scanning electron microscopy (SEM) at different magnifications. The surface porosity is in direct correlation to the MWCO derived from solute retention experiments. Copyright © 2004 John Wiley & Sons, Ltd.     

A DSC-Study of Donor/Acceptor Side-Chain Polymers with Flourinated Taper-Shaped Tails

It is shown that insertion in methacrylic polymers of bulky electron donor/acceptor side-groups with taper-shaped flourinated tails promotes a self-organization of the respective side-chain polymers due to the space demands of the bulky D/A side-groups, leading to a columnar hexagonal mesophase. The presence of an Lc-phase is evidenced by DSC and identified by X-ray analysis. The orientation in the respective copolymers and polymer blends is additionally improved by the CT-interaction between the D/A side-groups. An increased packing effect due to this CT-orientation effect is evidenced in DSC by an increase of the respective transition temperatures. CT-interaction is responsible as well for a preferential polymerization of monomeric D/A-complexes leading to copolymers of alternating structures and for a zip-like arrangement along the main chain of the A/D-complexes between the interacting side-groups in polymer blends. Formation of mesophases is even observed in CT-interacting blends between the Lc-D/A side-chain polymethacrylates and the respective amorphous D/A side-chain polysiloxanes.This revised version was published online in November 2005 with corrections to the Cover Date.     

Crystallization of poly(N-methyldodecano-12-lactam) in blends with poly(styrene-stat-acrylic acid)

Crystallization behaviour of blends of poly(N-methyldodecano-12-lactam) (PMDL) with statistical copolymer poly(styrene-stat-acrylic acid) (PSAA) has been studied by the DSC and WAXD methods. The blend films prepared from dioxane solutions were crystallized at laboratory temperature for five days. Approximate crystallinities of as-prepared neat lower- PMDL 5 and higher-molecular weight PMDL 45 were 28% and 19%, respectively. With increasing PSAA content in the blends the crystallinities decreased sharply. The melting point of the primary crystalline structure of PMDL showed a decreasing dependence on PSAA content in the blends, confirming miscibility of the PMDL-PSAA pair. Recrystallization was strongly suppressed in the blends. The lower-melting endotherm appearing at about 10-15 °C above the crystallization temperature was attributed to melting to less perfect structures formed during secondary crystallization. In neat PMDL, the extent of secondary crystallization was approximately 5-10%. In the blends containing 20% PSAA approximate relative proportion of secondary crystallites on total crystallinity was 40% and 60% for the blends with PMDL 5 and PMDL 45, respectively. WAXD measurements did not reveal any change in crystal modification on blending. Increased T_g in blends of flexible PMDL cannot play a significant role in suppression of primary in favour of secondary crystallization. This was attributed to low mobility of PMDL chains due to dilution effect and specific interactions with the amorphous copolymer component, and, in case of the higher-molecular-weight PMDL, a greater involvement of entanglements. Higher T_g of blends was involved in retardation of non-isothermal crystallization on cooling and subsequent cold crystallization.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Glass transition study of blends of poly(N-methyldodecano-12-lactam) with poly(styrene-co-acrylic acid)

The blends of poly(N-methyldodecano-12-lactam) (MPA) with poly(styrene-co-acrylic acid) (PSAA) prepared from dioxane solutions were studied by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The experimental DSC data of glass transition temperature T_g as a function of composition of amorphous phase were fitted for the as-prepared and re-scanned samples using theoretical approaches. The as-prepared blends show monotonic single-T_g dependence. The values of the Gordon-Taylor coefficient not far from unity suggest miscibility of the blend system in amorphous phase in the whole concentration range. As documented by FTIR, this miscibility is associated with hydrogen bonds between COOH groups of the acrylic acid units in PSAA molecules acting as the H-bond donor and CO groups of MPA acting as the H-bond acceptor. The T_g-dependencies obtained form the second runs have a profound sigmoid character. The Schneider treatment induced an idea of partial limited miscibility in the MPA/PSAA blends caused by prevalence of homogeneous contacts. The difference in T_g between the first and second run can partly be attributed to higher crystallinities in the former.     

Non-isothermal crystallization kinetics of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) blends

The glass-transition temperature and non-isothermal crystallization of poly(trimethylene terephthalate)/poly(ethylene 2,6-naphthalate) (PTT/PEN) blends were investigated by using differential scanning calorimeter (DSC). The results suggested that the binary blends showed different crystallization and melting behaviors due to their different component of PTT and PEN. All of the samples exhibited a single glass-transition temperature, indicating that the component PTT and PEN were miscible in amorphous phase. The value of T_g predicted well by Gordon-Taylor equation decreased gradually with increasing of PTT content. The commonly used Avrami equation modified by Jeziorny, Ozawa theory and the method developed by Mo were used, respectively, to fit the primary stage of non-isothermal crystallization. The kinetic parameters suggested that the PTT content improved the crystallization of PEN in the binary blend. The crystallization growth dimension, crystallization rate and the degree of crystallinity of the blends were increased with the increasing content of PTT. The effective activation energy calculated by the advanced iso-conversional method developed by Vyazovkin also concluded that the value of E_a depended not only on the system but also on temperature, that is, the binary blend with more PTT component had higher crystallization ability and the crystallization ability is increased with increasing temperature. The kinetic parameters U^* and K_g were also determined, respectively, by the Hoffman-Lauritzen theory.     

Enhanced thermal properties and flame retardancy from a thermosetting blend of a phosphorus‐containing bismaleimide and epoxy resins

Epoxy resins modified by an organosoluble phosphorus‐containing bismaleimide (3,3′‐bis(maleimidophenyl) ­phenylphosphine oxide; BMPPPO) were prepared by simultaneously curing epoxy/diaminodiphenylmethane (DDM), and BMPPPO. The resulted epoxy resins were found to exhibit glass transition temperatures as high as 212 °C, thermal stability at temperatures over 350 °C, and excellent flame retardancy with Limited oxygen index (LOI) values around 40. Incorporation of BMPPPO into epoxy resins via the thermosetting blend was demonstrated to be an effective way to enhance the thermal properties and flame retardancy simultaneously. Copyright © 2003 John Wiley & Sons, Ltd.     

Blends of starch with ethylene vinyl alcohol copolymers: effect of water,glycerol, and amino acids as plasticizers

Blends of thermoplastic starch with poly(ethylene‐co‐vinyl alcohol) copolymer (EVOH) were melt extruded with water/glycerol as plasticizer and a series of amino acid additives. The biggest factor in end‐use mechanical properties proved to be the relative humidity (RH) during storage. Plasticized starch‐EVOH blends stored at 0 and 50% RH changed significantly over time, with, for example, the tensile strength (TS) of the glycerol‐plasticized blend increasing from 4.7 to 26.3 MPa over 8 weeks when maintained at 0% RH. In contrast, the TS of this same sample stored at 75% RH remained unchanged for 8 weeks. Amino acids provided relatively minor, but significant changes in mechanical properties with time. Based on TS, elongation‐to‐break, and modulus, it may be concluded that β‐alanine, sarcosine, and L ‐proline were more effective than glycerol at maintaining strong flexible blends. Increases in crystallinity and changes in morphology with time, as described by modulated DSC were correlated to these changes in mechanical properties. Published in 2007 by John Wiley & Sons, Ltd.     

Novel polymer blends based on poly(ether-urethane) ionomer and ion-containing styrene copolymer

The structure-property relationships of thermoplastic polymer blends based on poly(ether-urethane) ionomer (PEUI) and ion-containing styrene-acrylic acid copolymer (S-co-AA(K)) have been investigated by using DMTA, DSC and TGA, as well as tensile tests. Convergence of the glass transition temperature (T_g) values of the PEUI and the S-co-AA(K) components in the blends studied, as compared to the individual polymers, was found and explained by improving compatibility of the components due to increasing effective density of physical networks formed by ion-dipole and ion-ion interactions of ionic groups of the components. Character of E'=f(T) and E'=f(T) dependencies confirms the increase of the effective density of physical networks in the compositions studied compared to individual PEUI and S-co-AA(K). Improvement of end-use properties, i.e. thermal stability and tensile properties has been found for the PEUI/S-co-AA(K) compositions with lower content of S-co-AA(K) (i.e. <10 mass%) and explained by formation of additional network of intermolecular ionic bonds between the functional groups of PEUI and S-co-AA(K).