JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

DFT Study on the Structure of Ionic Liquid 1-Ethyl-3-methylimidazolium Hexafluorophosphate

1 INTRODUCTION Ionic compounds generally have high melting points and always exist in solid state since they are main- tained by electrovalent bonds. Ionic Liquids (ILs), which are liquids at or near ambient temperature, have been a class of ionic compounds extensively studied experimentally and theoretically in recent years[1, 2]. ILs consist exclusively of anions and ca- tions and do not contain any neutral molecule. They have many attractive properties, such as low vapor pressure, no…     

Potentiometric measurements of the first hydrolysis quotient of magnesium(II) to 250°C and 5 molal ionic strength (NaCl)

The first molal hydrolysis quotient, Q_1.1, of Mg²⁺ was measured potentiometrically from 1 to 250°C at ionic strengths of 0.11, 0.31, 1.01, and 5.0 mol-kg^-1 in an aqueous NaCl medium using a hydrogen-electrode, concentration cell. Only hydrolysis of the first four percent of the magnesium in solution could be followed before precipitation of brucite, Mg(OH)₂(cr), occurred. The log Q_1.1 values were fitted as a function of temperature and ionic strength using four adjustable parameters. The resulting constants are compared with the limited existing low temperature data. At infinite dilution and 25°C the following quantities are reported: logK _1.1 = -11.68±0.05, †H_so = 70.1±1.2 kJ-mol^-1, †S^o = 11±4 J-K^-1-mol^-1, and †C _p ^o = 0 J-K^-1-mor^-1. At each ionic strength, including the values extrapolated to infinite dilution, the heat capacity change for the hydrolysis reaction was zero,i.e., logQ _1.1 was found to be a linear function of the reciprocal temperature in Kelvin, at least over the measured range of l-250°C. The hydrolysis constants at infinite dilution were modeled to 550°C and two kbar pressure with a function incorporating solvent density using published results obtained at these extreme conditions.     

Incorporating the effect of ionic strength in free energy calculations using explicit ions

The incorporation of explicit ions to mimic the effect of ionic strength or to neutralize the overall charge on a system in free energy calculations using molecular dynamics simulations is investigated. The difference in the free energy of hydration between two triosephosphate isomerase inhibitors calculated at five different ion concentrations is used as an example. We show that the free energy difference can be highly sensitive to the presence of explicit ions even in cases where the mutation itself does not involve a change in the overall charge. The effect is most significant if the molecule carries a net charge close to the site mutated. Furthermore, it is shown that the introduction of a small number of ions can lead to very severe sampling problems suggesting that in practical calculations convergence can best be achieved by incorporating either no counterions or by simulating at high ionic strength to ensure sufficient sampling of the ion distribution.     

Synthesis of amino acid-containing polyacids and their application in self-cured glass-ionomer cement

Six methacrylate or acrylate derivatives of natural amino acids were synthesized and characterized. Based upon these monomers, six terpolymers [poly(acrylic) acid-co-itaconic acid-co-amino acid] were prepared and characterized. The synthesized polymers were used to formulate glass-ionomer cements (GICs) using Fuji II glass filler. The effects of the molecular weight (MW) and powder/liquid (P/L) ratio were evaluated. Scanning electron microscopy (SEM) was used to examine the fracture surfaces of the selected cement specimens. Results show that all the amino acid modified GICs exhibited higher compressive strengths (CS, 193-236 MPa) and much higher flexural strengths (FS, 55-71 MPa) as compared to commercial Fuji II GIC (191 in CS and 16 in FS). Both MW and P/L ratio affected the strength of the formed cement. It was important to find the optimal MW and P/L ratio to obtain the highest FS. In this study, optimized MW (number average) of the polyacids and P/L ratio were around 50,000 and 2.7/1, respectively. The microstructures of the fracture surfaces helped to explain the strength differences among the materials tested in the study. SEM analysis suggests that more integrated microstructures and fewer defects can lead to higher FS.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

头发锌含量测定的应用价值评价

以114例2－5岁儿童为对象，同时取其末梢血和头发，测定锌含量。以全血锌值为标准，评价头锌测定的应用价值。结果显示，头发锌测定的灵敏度可达86．1％，特异度为52．4％，符合率为73．7％。     

Solvation of uranyl(II), europium(III) and europium(II) cations in "basic" room-temperature ionic liquids: a theoretical study

We report a molecular dynamics study of the solvation of UO2(2+), Eu3+ and Eu2+ ions in two "basic" (Lewis acidity) room-temperature ionic liquids (IL) composed of the 1-ethyl-3-methylimidazolium cation (EMI+) and a mixture of AlCl4- and Cl- anions, in which the Cl-/AlCl4- ratio is about 1 and 3, respectively. The study reveals the importance of the [UO2Cl4]2- species, which spontaneously form during most simulations, and that the first solvation shell of europium is filled with Cl- and AlCl4- ions embedded in a cationic EMI+ shell. The stability of the [UO2Cl4]2- and [Eu(III)Cl6]3- complexes is supported by quantum mechanical calculations, according to which the uranyl and europium cations intrinsically prefer Cl- to the AlCl4- ion. In the gas phase, however, [Eu(III)Cl6]3- and [Eu(II)Cl6]4- complexes are predicted to be metastable and to lose two to three Cl- ions. This contrasts with the results of simulations of complexes in ILs, in which the "solvation" of the europium complexes increases with the number of coordinated chlorides, leading to an equilibrium between different chloro species. The behavior of the hydrated [Eu(OH2)8]3+ complex is considered in the basic liquids; the complex exchanges H2O molecules with Cl- ions to form mixed [EuCl3(OH2)4] and [EuCl4(OH2)3]- complexes. The results of the simulations allow us to better understand the microscopic nature and solvation of lanthanide and actinide complexes in "basic" ionic liquids.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

在离子液体中一步法合成吡唑[5,4-b]-γ-吡喃衍生物

芳醛、丙二腈与4,5-二氢-3-甲基-5-氧代-1-苯基吡唑在离子液体[bmim][BF₄]中反应, 合成了2-氨基-4-芳基-3-氰基-5-甲基-7-苯基吡唑[5,4-b]-γ-吡喃衍生物, 该法快速、高效, 是一种洁净的合成方法. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征.