Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

Electroconduction of Potassium Orthophosphate Modified with Triple-Charged Cations

Solid electrolytes in the systems K_{3 – 3x} Me _x PO₄ (Me = Sc, Y, In, La, Nd, Gd, Tb) are synthesized. Their phase composition and the temperature and concentration dependences of their electroconductivity are studied. In all the systems there form solid solutions based on K₃PO₄, which have a high potassium cation conductance. The latter is due to the formation of potassium vacancies at substitutions 3K⁺ Me³⁺ and, at lower temperatures, to stabilization of a high-temperature -modification of potassium orthophosphate. The electroconductivity of synthesized solid solutions, which equals (4–7) × 10^–3 and 10^–1 S cm^–1 at 300 and 700°C, is similar to that of solid electrolytes K_{3 – x} P_{1 – x} E _x ^VIO₄ and K_{3 – 4x} E _x ^IVPO₄.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.     

A lyotropic nematic phase of lamellar micelles (N L) obtained by a non-ionic surfactant in aqueous solution

A non ionic surfactant with a rigid rod-like hydrophobic group has been synthesized. Owing to the molecular geometry of the surfactant only lamellar micelles are formed in aqueous solution.This system exhibits a lyotropic nematic phase (N _L), which for the first time has been found for a binary non ionic surfactant/water system.Herrn Professor Dr. H.-G. Kilian mit herzlichen Glückwünschen zum 60. Geburtstag gewidmet.     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.     

Partial molal volumes of ions in organic solvents from ultrasonic vibration potential and density measurements. III. Dimethylsulfoxide

The partial molal volumes of Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Cl^–, Br^–, I^–, and NO ₃ ^- in DMSO at 25°C have been determined from ultrasonic vibration potential data and density data for solutions of uni-univalent electrolytes. Hepler's semiemprirical equation has been used to split ionic partial molal volumes into geometric and electrostrictive contributions. The results obtained in this work confirm the conclusion of our previous studies, namely, that the contribution of electrostriction is essentially determined by the properties of that layer of atoms, 0.3 to 0.4 nm thick, in contact with the ion and by the degree of steric hindrance of the poles of the dipole of the solvent molecule. On the other hand, the geometric contribution depends on the size of the solvent molecule and also on the arrangement of the solvent molecules about the ions. It is shown that the geometric contribution to the partial molal volume of ions is largely increased when ions cannot come close enough to the poles of the solvent-molecule dipole, owing to steric hindrance.     

Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

The dissociation quotients of formic acid in sodium chloride solutions to 200°C

The dissociation quotients of formic acid were measured potentiometrically from 25 to 200°C in NaCl solutions at ionic strengths of 0.1, 0.3 1.0, 3.0, and 5.0 mol-kg^–1. The experiments were carried out in a concentration cell with hydrogen electrodes. The resulting molal acid dissociation quotients for formic acid, as well as a set of infinite dilution literature values and a calorimetrically-determined enthalpy of reaction, were fitted by an empirical equation involving an extended Debye Hückel term and seven adjustable parameters involving functions of temperature and ionic strength. This regressional analysis yielded the following thermodynamic quantities for 25°C: logK=–3.755±0.002, H^o=–0.09±0.15 kJ-mol^–1, S^o=–72.2±0.5 J-K^–1-mol^–1, and C _p ^o =–147±4 J-K^–1-mol^–1. The isocoulombic form of the equilibrium constant is recommended for extrapolation to higher temperatures.