Optical properties of cadmium sulfide nanocrystal film prepared by electrochemical synthesis at liquid-liquid interface

Dendritic nanocrystalline CdS film was deposited at liquid-liquid interface of surfactants and an electrolyte containing 4 mmol L⁻¹ cadmium chloride (CdCl₂) and 16 mmol L⁻¹ thioacetamide (CH₃CSNH₂) with an initial pH value of 5 at 15 °C by electrochemical synthesis. The nanofilm was characterized by transmission electron microscopy (TEM), field emission scanning electron microscope (FE-SEM), atomic force microscopy (AFM), ultraviolet visible (UV-vis) absorption spectroscopy and fluorescence spectroscopy. The surface morphology and particle size of the nanofilm were investigated by AFM, SEM and TEM, and the crystalline size was 30-50 nm. The thickness of the nanofilm calculated by optical absorption spectrum was 80 nm. The microstructure and composition of the nanofilm was investigated by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), showing its polycrystalline structure consisting of CdS and Cd. Optical properties of the nanofilm were investigated systematically by UV-vis absorption and fluorescence spectroscopy. A λ_onset blue shift compared with bulk CdS was observed in the absorption spectra. Fluorescence spectra of the nanofilm indicated that the CdS nanofilm emitted blue and green light. The nanocomposites film electrode will bring about anodic photocurrent during illumination, showing that the transfer of cavities produces photocurrent.     

基于变压红外光谱研究离子液体[MPIM][I]与石墨烯氧化物之间的相互作用

本研究利用红外光谱研究不同压力下离子液体1-Methy1-3-propylimidazolium iodide([MPIM][I])与石墨烯及其氧化物的相互作用.结果表明,[MPIM][I]对压力的变化具有高敏感度,咪唑环与烷基链在0.4 GPa时产生相变化,可明显观察到吸收峰的裂解,且连续加压会导致咪唑环与烷基链的振动频率蓝移.[MPIM][I]与石墨烯作用时加压至2.5 GPa也未观测到相变化的产生,且咪唑环与烷基链的振动频率蓝移趋势也不明显;[MPIM][I]与石墨烯氧化物作用时咪唑环与烷基链的结果与添加石墨烯时几乎相同.石墨烯氧化物具有羟基、羧基、环氧基等共价键结在其表面,这些羟基会扰动[MPIM][I]中的咪唑环与烷基链,导致在常压下振动频率发生蓝移,进而表明石墨烯表面的官能基团会与离子液体产生相互作用.     

基于双目视觉的室内定位标定新方法

随着全球导航卫星系统的发展,位置服务日渐成为人们生活工作之中必不可少的一部分,越来越多的人习惯使用定位技术。随着室内导航应用需求的不断增加,基于多目视觉原理的室内定位导航技术已经成为目前很多技术领域的研究热点,并日趋成熟。在室内导航定位前,相机的标定过程是重中之重,标定精度对最终定位精度有着决定性作用。然而,当有气液界面存在时,由于视线在传播过程中发生折射,现有的线性标定技术不再适用,并成为制约室内特殊场景定位(如水下机器人作业)的主要技术障碍。针对有气液界面的条件提出了一种新的标定方法,对界面位置进行精确定位,并修正了线性针孔模型,能够有效解决有气液界面存在条件下不能准确标定的难题,克服了封闭体内测量时无法进行现场标定的困难。为验证标定方法的可行性与可靠性,进行了数值模拟,模拟结果显示,此方法误差较小,满足室内定位中的标定精度要求。     

舰基遥测综合解调控制系统设计

遥测实时监控是保障试飞安全、提高试飞效率的重要手段。针对舰上特殊的试飞环境限制,现有遥测系统不能适应其任务需求,为完成某型号飞机舰上试飞任务,需要对现有遥测接收系统进行改进,以应对特殊试飞科目下对遥测信号的需求。采用跟踪接收机模块,并开发相应的解调模块,对系统设备进行远程控制解决了远距离数据传输的信号衰减问题;对遥测系统的自动温度控制大大提高了系统设备的环境适应性;通过接口转换实现模拟图像的网络输出、接收机模块和天线的网络串口转换,简化了信号接口类型,降低了信号传输的难度;从而实现小型化的舰基遥测综合解调控制系统设计。     

Current–voltage characteristic of BaTiO3−δ in its mixed n/p regime under oxygen potential gradients

Current (I)–voltage (V) characteristic under oxygen potential gradients was experimentally examined on single crystal BaTiO_3−δ in its mixed ion/electron/hole regime at 1000 °C. The variation of I vs. V appears similar to that of an n/p junction, but with the limiting slope (dI/dV) approaching the maximum and minimum possible equilibrium conductances in the given oxygen potential gradient as increasing forward and reverse bias, respectively. This characteristic has been precisely traced theoretically by using the partial ionic and electronic conductivities of BaTiO_3−δ as measured against uniform oxygen chemical potential in equilibrium state. The nonlinear characteristic is attributed to the redistribution of oxygen chemical potential that is caused by a non-vanishing gradient of the ionic transference number of the oxide under the given oxygen potential gradient. It is demonstrated that the bulk transport properties of a mixed conductor may be tailored by terminal voltage in a chemical potential gradient.     

Monte Carlo study of interfacial silicon suboxide layers and oxidation kinetics

A simple simulation scheme that simultaneously describes the growth kinetics of SiO₂ films at the nanometer scale and the SiO_x/Si interface dynamics (its extent, and spatial/temporal evolution) is presented. The simulation successfully applies to experimental data in the region above and below 10 nm, reproduces the Deal and Grove linear-parabolic law and the oxide growth rate enhancement in the very thin film regime (the so-called anomalous region). According to the simulation, the oxidation is governed mainly by two processes: (a) the formation of a transition suboxide layer and (b) its subsequent drift towards the silicon bulk. We found that it is the superposition of these two processes that produces the crossover from the anomalous oxidation region behavior to the linear-parabolic law.     

Fixed charge and interface traps at heterovalent interfaces between Si(1 0 0) and non-crystalline Al2O3–Ta2O5 alloys

Characterization by Auger electron spectroscopy (AES) and Fourier transformation infrared spectroscopy (FTIR) confirms (Ta₂O₅)_x(Al₂O₃)_1−x alloys are homogeneous pseudo-binary alloys with increased thermal stability with respect to end member oxides, Ta₂O₅ and Al₂O₃. Capacitance–voltage (C–V) and current density–voltage (J–V) data as a function of temperate show that the Ta d-states of the alloys act as localized electron traps, and are at an energy approximately equal to the conduction band offset of Ta₂O₅ with respect to Si.     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

强脉冲X射线辐照在Si-SiO2中感生的界面态及退火消除

 利用强脉冲X射线对Si-SiO₂界面进行了辐照，测量了界面态曲线和退火曲线。实验显示，经过强脉冲X射线对Si-SiO₂界面进行的辐照，在Si-SiO₂界面感生出新的界面态，感生界面态的增加与辐照剂量成正比，并且易出现饱和现象。总结出了感生界面态密度产额Dit随辐照剂量D变化的分布式，并定性分析了Dit随D变化的行为。随后进行的退火实验表明，强脉冲X射线辐照感生出的界面态越多，退火时这些界面态就消除得越快。退火过程显示有滞后现象，即辐照剂量大的阈电压漂移，在退火后恢复的绝对值，要小于辐照剂量小的阈电压漂移。导出了阈电压漂移随退火时间变化的关系，定性解释了滞后现象。