Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters

1-Propyl-3-methylimidazolium chloride ([C₃MIm]Cl) ionic liquid and sulfamic acid (NH₂SO₃H), as a synergetic catalytic medium, were used for the transesterification of acetoacetate with alcohols of different structures. It shows the good ability for the chemoselective transesterificatin of β-ketoesters and maintains its catalytic activity in the reuse.     

FREE BOUNDARY PROBLEM ARISING FROM EVAPORATION FROM POROUS MEDIUM

ＦＲＥＥＢＯＵＮＤＡＲＹＰＲＯＢＬＥＭＡＲＩＳＩＮＧＦＲＯＭＥＶＡＰＯＲＡＴＩＯＮＦＲＯＭＰＯＲＯＵＳＭＥＤＩＵＭＹＡＮＧＬＩＰＩＮＧ（杨力平）（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓ，ＴｓｉｎｇｈｕａＵｎｉｖｅｒｓｉｔｙ，Ｂｅ...     

IPv4/IPv6翻译网关的研究

In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.     

Short-range order and F ion diffusion inside the Pb1 − xAlxF2 + x solid solution Part II: Al NMR investigation and proposal of clustering process

A ²⁷Al nuclear magnetic resonance (NMR) investigation at room temperature of the Pb_{1 − x}Al_xF_{2 + x} (0 ≤ x ≤ 0.12) solid solution and of the ordered Pb₉Al₂F₂₄ phase is carried out. Two different types of aluminium ions are identified and their ratio is determined as a function of x. A clustering process based on the formation of column clusters, more and more extended when x increases, is proposed on the basis of results issued from the ¹⁹F (Part I) and ²⁷Al NMR investigations.     

A hybrid finite-element–volume-of-fluid method for simulating free surface flows and interfaces

A numerical technique is developed for the simulation of free surface flows and interfaces. This technique combines the strength on the finite element method (FEM) in calculating the field variables for a deforming boundary and the versatility of the volume-of-fluid (VOF) technique in advection of the fluid interfaces. The advantage of the VOF technique is that it allows the simulation of interfaces with large deformations, including surface merging and breaking. However, its disadantage is that is solving the flow equations, it cannot resolve interfaces smaller than the cell size, since information on the subgrid scale is lost. Therefore the accuracy of the interface reconstruction and the treatment of the boundary conditions (i.e. viscous stresses and surface tension forces) become grid-size-dependent. On the other hand, the FEM with deforming interface mesh allows accurate implementation of the boundary conditions, but it cannot handle large surface deformations occurring in breaking and merging of liquid regions. Combining the two methods into a hybrid FEM-VOF method eliminates the major shortcomings of both. The outcome is a technique which can handle large surface deformations with accurate treatment of the boundary conditions. For illustration, two computational examples are presented, namely the instability and break-up of a capillary jet and the coalescence collision of two liquid drops.     

Synthesis and comparative solution properties of single‐, twin‐, and triple‐tailed associating ionic polymers based on diallylammonium salts

The cycloterpolymerizations of single‐, twin‐, and triple‐tailed hydrophobes with hydrophilic monomer N,N‐diallyl‐N‐carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPEs) in excellent yields. These CPEs, upon the acidic hydrolysis of the pendent ester groups, gave the corresponding pH‐responsive cationic acid salts, which, upon a treatment with sodium hydroxide, were converted to polybetaines (PBs), anionic polyelectrolytes (APEs), and PB/APE polymers containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. At a shear rate of 0.36 s⁻¹ at 30 °C, salt‐free water solutions of the CPEs (2 g/dL) containing 8, 4, and 2.67 mol % of the single‐, twin‐, and triple‐tailed hydrophobes (all having 8 mol % octyloxy tails) had apparent viscosity values of 70, 2800, and 396,000 cps, respectively. The PB/APE polymer with a ratio of 33:67 for the zwitterionic and anionic fractions in the polymer chain gave the highest viscosity value. The superior viscosity behavior of the polymers containing the triple‐tailed hydrophobe was attributed to the blocky nature of the comonomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5480–5494, 2006     

Structural anisotropy in friction‐deposited layers of polystyrene

Friction‐deposited layers of atactic polystyrene (PS) on inert and OH‐grafted gold substrates were the subject of this study to establish a relationship between the friction process and the resulting anisotropy of the transferred polymer chains. We show, by using polarization‐modulation infrared reflection‐absorption spectroscopy that the deposited PS chains involve an anisotropy in which PS main backbone is rather perpendicular to the friction support, fact that is surprising when compared with the majority of polymers where the anisotropy is along the sliding direction. Moreover, our calculation of the orientation angles revealed that PS chains are more perpendicular in the transferred layers than in spin‐coated films. This particular anisotropy is probably due to a parallel reorientation of the phenyl ring on the friction support whatever the surface chemistry is. On the other hand, this study was useful to rectify the assignment of infrared bands unclearly reported in the literature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3272–3281, 2006     

Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006