综合设计性专业实验:离子液体[BMIM]Br的制备及在柴油脱硫中的应用

在微波辅助下合成、纯化了离子液体溴化1-甲基-3-丁基咪唑[BMIM]Br，测定了产率和纯度，并使用FTIR和1HNMR进行了产物结构表征；以[BMIM]Br为萃取剂对催化裂化和加氢裂化柴油进行超声辅助萃取脱硫，并测定了脱硫率；在反应条件优化、测试方法优化、脱硫选择性等方面设置了多个开放性设计实验。该实验项目融合精细化工和石油化工方向，在促进学生知识体系跨界，全面训练综合实验技能，培养学生解决实际问题能力以及科研能力形成等方面作用明显；实验项目以模块化设置，符合"绿色实验"原则。     

离子液体载催化剂和载试剂在有机合成中的应用

综述了离子液体载催化剂和载试剂在有机合成中的应用进展. 离子液体载催化剂是针对离子液体中催化剂难以回收利用的问题提出来的, 它不仅可以实现均相催化, 而且反应产物容易分离, 催化剂可以循环使用. 离子液体载有机试剂合成, 又称为离子液体相有机合成, 具有固相反应产物纯度高和液相反应反应快的优点. 在离子液体载无机试剂的反应中, 反应物毒性降低, 反应条件温和, 产物选择性好.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

[Me3NC2H4OH]Zn2Cl5水溶液的激光光解研究

利用时间分辨激光光解技术研究了季铵盐型离子液体[Me₃NC₂H₄OH]Zn₂Cl₅(简写R-Zn₂Cl₅)的光解行为, 研究发现离子液体能被266 nm激光单光子电离, 生成阳离子自由基、[Zn₂Cl₅]^•中性自由基和水合电子, 观察到胆碱激发三线态的存在, 并测定了离子液体光电离的量子产额为0.04. 利用266 nm激光对离子液体、胆碱、氯化锌、氯化钠的光解行为比较, 发现胆碱阳离子的贡献很小, [Zn₂Cl₅]^－阴离子起主要作用. 采用氧化性自由基SO₄^•－引发离子自由基, 揭示其光电离机理, 测定离子液体的动力学反应速率常数, SO₄^•－ 460 nm的衰减速率常数为1.3×10⁹ L•mol^－1•s^－1, 320 nm离子自由基瞬态产物的生成速率常数为1.5×10⁹ L•mol^－1•s^－1, 两者很接近, 说明SO₄^•－自由基的衰减与瞬态自由基的生成是同步的.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O₂-responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance.     

Measurements and Utilization of Consistent Gibbs Energies of Transfer of Single Ions: Towards a Unified Redox Potential Scale for All Solvents

Utilizing the “ideal” ionic liquid salt bridge to measure Gibbs energies of transfer of silver ions between the solvents water, acetonitrile, propylene carbonate and dimethylformamide results in a consistent data set with a precision of 0.6 kJ mol⁻¹ over 87 measurements in 10 half-cells. This forms the basis for a coherent experimental thermodynamic framework of ion solvation chemistry. In addition, we define the solvent independent - and the values that account for the electronating potential of any redox system similar to the value of a medium that accounts for its protonating potential. This scale is thermodynamically well-defined enabling a straightforward comparison of the redox potentials (reducities) of all media with respect to the aqueous redox potential scale, hence unifying all conventional solvents′ redox potential scales. Thus, using the Gibbs energy of transfer of the silver ion published herein, one can convert and unify all hitherto published redox potentials measured, for example, against ferrocene, to the scale.     

复合离子液体催化碳四烷基化反应性的研究

合成了一种新型的酸性离子液体催化剂——复合离子液体，该离子液体的阴离子具有双金属的配位中心。同时，研究了复合离子液体催化异丁烷与丁烯烷基化反应的规律。结果表明，在搅拌速率大于1500r/min，反应低于20℃，烃酸比2∶1~3∶1，烷烯比大于15，反应停留5min~10min，使用丁烯-2为碳四烯烃反应原料下，复合离子液体催化碳四烷基化所得烷基化油的研究法辛烷值（RON）最高可达100以上，明显优于常规氯铝酸离子液体催化所得烷基化油的质量。     

Green-synthesized,low-cost tetracyanodiazafluorene (TCAF) as electron injection material for organic light-emitting diodes

As facile,green,low-cost as possible:One more electron-deficient azaacene (TCAF) with deep LUMO (-4.52 eV), strong electronic affinity,excellent yield,and simple purification procedure was successfully created and explored as good electron injection material.It is believed TCAF would be a promising and pervasive acceptor material and bring in more significant achievements to green and sustainable organic electronics including OLEDs,OFETs,OPVs, and perovskite solar cells,etc.