Trigonal-planare CuX3-Gruppen in Cu2Mo6X14, X = Cl,Br, I

Trigonal Planar CuX₃-Groups in Cu₂Mo₆X₁₄, X = Cl, Br, I Cu₂Mo₆Cl₁₄ (I), Cu₂Mo₆Br₁₄ (II) and Cu₂Mo₆I₁₄ (III) were synthesized by thermal treatment of corresponding mixtures of copper(I) and molybdenum(II) halides. The crystal structures were determined by single crystal X-ray analyses. I and II show isotypism, cubic, Pn3 (no. 201, sec. setting), Z = 4, I: a = 12.772(3) Å, II: a = 13.350(2) Å. III shows a new structural type, orthorhombic, Pbca (No. 61), Z = 4, a = 16.058(3) Å, b = 10.643(2) Å, c = 16.963(3) Å. Trigonal planar CuX₃ units were found in I? III. Structural behaviour relations are discussed, especially with regard to ionic conductivity.     

A potentiometric investigation of the hydrolysis of chromate (VI) ion in NaCl media to 175°C

The hydrolysis of chromate ion was studied potentiometrically in a concentration cell fitted with hydrogen electrodes by titrating basic NaCl–Na₂CrO₄ solutions with standardized HCl against a NaOH reference solution. The temperature was varied from 25 to 175°C at 25° intervals at the following ionic strengths (I): 0.1140, 0.2346, 0.5337, 0.9988, 2.940, and 5.239 (NaCl). Depending on the ionic strength, the molality of total chromium was varied from 0.001 to 0.100. The resulting titration curves could be resolved best in terms of three equilibria involving the formation of HCrO ₄ ^– (aq), Cr₂O^3– (aq), and CrO₃Cl^– (aq). The equilibrium quotients for all three reactions were fitted as a function of temperature and ionic strength, and the molal thermodynamic parameters that were computed from these relationships are tabulated at specific ionic strengths over the experimental temperature range.     

基于金属介导和离子液体的新型绿原酸印迹整体柱的制备及评价

选用1-乙烯基-3-乙基咪唑四氟硼酸盐([VElm]BF4,一种离子液体)作为功能单体,以Co2+为介导离子,结合1-丁基-3-甲基咪唑四氟硼酸盐([BMIM]BF4)/二甲基亚砜(DMSO)二元致孔体系制备了绿原酸印迹整体柱。经过对制备参数的考察,确定最佳比例为绿原酸:Co2+:[VElm]BF4:EDMA(乙二醇二甲基丙烯酸酯)(摩尔比)=1:1:5:20,[BMIM]BF4:DMSO=3:1(V/V),最大印迹因子达2.10。通过优化色谱条件,最终在乙腈:20 mmol/L乙酸钠缓冲液(pH 4.2)=70:30(V/V)时实现了绿原酸及其类似物的完全分离。由此可见,以离子液体为功能单体及致孔剂,在金属介导策略下制备的分子印迹聚合物可实现绿原酸的特异性识别及分离。     

Determination of ammonia based on the electro-oxidation of hydroquinone in dimethylformamide or in the room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

The results detail a novel methodology for the electrochemical determination of ammonia based on its interaction with hydroquinone in DMF. It has been shown that ammonia reversibly removes protons from the hydroquinone molecules, thus facilitating the oxidative process with the emergence of a new wave at less positive potentials. The analytical utility of the proposed methodology has been examined with a linear range from 10 to 95 ppm and corresponding limit-of-detection of 4.2 ppm achievable. Finally, the response of hydroquinone in the presence of ammonia has been examined in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluormethylsulfonyl)imide, [EMIM][N(Tf)₂]. Analogous voltammetric waveshapes to that observed in DMF were obtained, thereby confirming the viability of the method in either DMF or [EMIM][N(Tf)₂] as solvent.     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

Study of the absorption spectra and ionic equilibria of cationic-anionic polymethine dyes

The absorption spectra of a number of cationic-anionic polymethine dyes in polar, low-polarity, and nonpolar solvents were studied. It was established that in polar solvents the absorption spectra represent the sum of the absorption spectra of the cation and anion, whereas in nonpolar and low-polarity solvents, in many cases the appearance of a short-wave absorption band is observed, due to interaction of the chromophores of the cation and anion in ion pairs. In solvents of intermediate polarity (for example, in chloroform and ethyl acetate), a concentration dependence of the absorption spectra is observed, determined by the equilibria of ionic dissociation. The ionic dissociation constants of a number of cationic-anionic dyes in chloroform and ethyl acetate were determined by a conductometric method. The thermodynamic data obtained are compared with the spectral data.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2524–2532, November, 1992.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl6

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl₆ was studied. The metathesis is preceded by isomerization of hex-1-ene to hex-2-ene, from which the main reaction product, viz., oct-4-ene, is derived. The WCl₆-1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF₄) system efficiently catalyzes metathesis of linear olefin, the ionic liquid serving as the reaction medium by forming a stable homogeneous catalytic system with WCl₆. The yields of the metathesis products increase with increasing reaction temperature. The addition of tin-containing promoters leads to a substantial increase in the reaction rate. In the WCl₆-BMIM·BF₄-SnBu₄ system, the selectivity of the formation of oct-4-ene is significantly enhanced.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2094–2097, October, 2004.     

Regioselective acylation of methyl 2-methyl-4H-thieno[3,2-b]pyrrole-5-carboxylate

The influence of catalysts, acid chlorides, and solvents on the acylation of methyl 2-methyl-4H-thieno[3,2-b]pyrrole-5-carboxylate was studied. The use of AlCl₃ allows the regioselective introduction of the acyl group into position 3 to be performed, whereas the acyl group is regioselectively introduced into position 6 of thienopyrrole when SnCl₄ is used.