Recycling Chiral Organocatalyst （4S）-Phenoxy-（S）-proline for Direct Asymmetric Aldol Reaction in Ionic Liquid （bmim）PF6

Room temperature ionic liquid (bmim)PF6 was evaluated for recycling an organocatalyst (4S)-phenoxy-(S)-proline for direct asymmetric aldol reactions. The desired aldol products were obtained with good yields up to 93.2% and enantioselectivities up to 88.5%, and isolation of the products by simple extraction allowed recycling the ionic liquid containing the immobilized catalyst in subsequent reactions without significant decrease of yields and enantioselectivities.     

离子液体介质中FeCl3•6H2O催化下芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应

考察了在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])介质中, 芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应. 实验结果表明, 在催化量的FeCl₃•6H₂O存在下, 该反应可高产率地生成氧杂蒽二酮类化合物3; 而在TMSCl/FeCl₃•6H₂O复合催化体系的催化下, 则得到氧杂蒽二酮类化合物的开环衍生物4, 反应具有非常好的选择性. 该论文提供的方法操作简单、产率高、选择性好而且对环境友好. 在反应结束后, 所用催化剂及离子液体都很容易回收, 并能有效重复使用.     

Identification of micro-scale calorimetric devices

Micro-calorimetric devices using Si-based sensors are very useful for the study of gas–solid reactions, in which very low mass of reactants are necessary. But in fact the consequence of using flat detectors is an increase of the uncertainty in the measured energy. In this work a calorimetric gas sensor based on Xensor chip is analysed studying the local x–y contributions of dissipation to the sensitivity related to the value in the centre. We study also the effects of the gas-flow on the sensitivity, comparing the results obtained with two Xensor type chips. Finally we carry out a deeper analysis of the x–y effects on the calorimetric detector for dissipations in the reactant shell extremely close to the detector surface to visualize the link between the power density distribution and the output signal.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

Conductances of some electrolytes in 2-methylpyridine-N-oxide at 55°C

Conductance measurements for fifteen uni-univalent salts in 2-methylpyridine-N-oxide (2-MPO) were made over the concentration range of 2–120×10^–4 mol-dm^–3 at 55°C. All conductance data were evaluated by the Lee-Wheaton equation. The results indicate that all of the salts studied are slightly associated in 2-MPO, which is, nevertheless, a reasonably good ionizing solvent compared to other solvents having a similar value for the dielectric constant. The tetraalkylammonium halides are weaker electrolytes than the tetraphenylborate salts in 2-MPO. Ionic limiting molar conductances were obtained by using as a reference electrolyte tris(iso-pentyl)butylammonium tetraphenylborate. Anions appear to be poorly solvated in this solvent but certain cations, particularly Na⁺ and K⁺, show evidence of specific ion-solvent interaction.This study was presented, in part, at the 6th Central Regional Meeting of the American Chemical Society, Detroit, Michigan, April 1974.     

功能化离子液体中Ag纳米微粒的制备及摩擦学性能研究

合成了1-甲基-3-羟乙基咪唑四氟硼酸盐离子液体([C₂OHmim]BF₄)，用红外光谱表征了其结构。以所合成的离子液体作为还原剂、稳定剂与反应介质制备了Ag纳米微粒，用XRD和TEM对微粒的结构和形貌进行了表征。在四球摩擦磨损实验机上研究了[C₂OHmim]BF₄离子液体及掺入Ag纳米微粒后的离子液体的摩擦学性能。掺入银纳米微粒后，离子液体在高载荷下的润滑性有了大幅的改善。用SEM和XPS分别对磨痕表面的形貌和元素组成、化学状态进行了分析，结果表明：在低、高载荷分别起润滑作用的是有机膜和金属-有机复合膜。     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

EXAFS studies of cobalt oxides and oxide glasses

The exafs of Co²⁺ has been studied in rare earth cobaltites and in sulphate and borate glasses. It has been found that the environment of Co²⁺ ions is very similar in these cases. It appears feasible to study local structures in glasses using probe ion exafs. Communication No. 151 from the Solid State and Structural Chemistry Unit.     

Ion Transfer in CdF<Subscript>2</Subscript>-based Iso- and Polyvalent Solid Solutions

The ionic conductivity of solid solution Cd_0.77Sr_0.23F₂ is 1.6 × 10⁻⁴ S/cm at 500 K. The conduction mechanism changes from a vacancy mechanism to an interstitial one at 523–553 K. In solid solutions Cd_0.9R_0.1F_2.1 (R = La-Lu, Y), the activation enthalpy of conduction decreases from 0.9 to 0.8 eV with decreasing ionic radius of R³⁺, raising the 500-K conductivity from 6 ×10⁻⁶ S/cm for La³⁺to 6 × 10⁻⁵ S/cm for Lu³⁺. For crystalline Cd_0.95In_0.05F_2.05, ionic and electronic conductivities at 313 K equal 5 × 10⁻⁴ and 5 − 10⁻⁶ S/cm.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 627–632.Original Russian Text Copyright © 2005 by Sorokin, Buchinskaya, Sul’yanova, Sobolev.