Ionic Interactions of Calcium Sulfate Dihydrate in Aqueous Sodium Chloride Solutions: Solubilities,Densities, Viscosities,Electrical Conductivities,and Surface Tensions at 35 <Superscript>∘</Superscript>C

The thermodynamic, volumetric, transport, and surface properties, solubilities, densities, viscosities, electrical conductivities, and surface tensions of calcium sulfate dihydrate in aqueous sodium chloride solutions have been measured at 35 C, with a view to determine the ionic interactions that occur in these solutions. The experimental density values have been used to calculate the mean apparent molar volumes of the ternary mixtures. Viscosity values have been analyzed using different empirical equations and the experimental values of the viscosity were combined with conductivity to yield the Walden product. Molar surface energies have been computed using experimental surface tension data. The experimental data have been fitted to polynomial equations by a least-squares analysis to obtain the coefficients and their standard errors. Results have been examined in the light of structure making or structure breaking effects of the various ions present in the solutions.     

新型氧离子导体La2Mo1.8Ga0.2O9陶瓷的合成及其电性能

通过高温固相合成法首次合成了La₂Mo_1.8Ga_0.2O₉陶瓷样品. 粉末XRD结果表明, 该样品为单一立方相La₂Mo₂O₉结构. 以陶瓷样品为固体电解质、多孔性铂为电极, 采用交流阻抗谱、气体浓差电池、氧泵等方法研究了样品在600～1000 ℃下各种气氛中的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 氧离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯氧离子导体; 氧泵(氧的电化学透过)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 在氧分压p(O₂)＝10^－5～10⁵ Pa的高氧分压气氛中, 电导率与氧分压变化基本无关, 表明在该氧分压范围内样品为纯离子导体, 这与氧浓差电池电动势测定结果相吻合; 在低氧分压为10^－5～10^－15 Pa范围内, 总电导率随氧分压降低而稍有升高, 表明在该氧分压范围样品为氧离子与电子的混合导体; 在600～1000 ℃下氧离子电导率＞10^－2 S•cm^－1, 显著高于母体La₂Mo₂O₉的氧离子电导率, 1000 ℃时的氧离子电导率为0.07 S•cm^－1.     

Poly(N-vinyl-2-pyrrolidone) and 1-Octyl-2-pyrrolidinone Modified Ionic Microemulsions

The influence of the nonionic polymer poly(N-vinyl-2-pyrrolidone) (PVP) in comparison to the surfactant 1-octyl-2-pyrrolidinone (OP) on the phase behavior of the system SDS/pentanol/xylene/water was studied. In both modified systems a strong increase in the water solubilization capacity was found, accompanied by a change in the spontaneous curvature toward zero. In the polymer-modified system an isotropic phase channel is formed with increasing polymer content that connects the L1 and the L2 phase. The lamellar liquid crystalline phase is destabilized in both cases. In the L1 phase the adsorption of PVP at the surface of the microemulsion droplets and the formation of a cluster-like structure is proven by several methods like ¹³C NMR T₁ relaxation time measurments, zeta potential measurements, and rheology. In the L2 phase a modification of the interface of the inverse droplets is detected by a shift in the percolation boundary (conductivity) and ¹³C NMR T₁ relaxation measurements. The formation of a cluster-like structure can be assumed on the basis of our rheological measurements.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

Ionic Mobility, Phase Transitions, and Superionic Conduction in Solid Solutions (100 ? x)PbF2-xZrF4 and Crystals K2ZrF6, (NH4)2ZrF6, KSnZrF7, and M(NH4)6Zr4F23 (M = Li, Na)

Methods of (¹⁹F, ¹H) NMR and impedance spectroscopy are used to investigate the internal mobility and ionic conduction in solid solutions arising in the system PbF₂-ZrF₄ and polycrystals KSnZrF₇, Li(Na)(NH₄)₆Zr₄F₂₃, and M₂ZrF₆ (M = K, NH₄). Factors responsible for the form of ionic motions and their energetics at 170–550 K are considered. It is established that the phase transitions in these compounds are connected with the crystal transition to a superionic state and that the high ionic (superionic) conductivity of beta phases is due to the diffusion of fluoride ions, ammonium cations, and possibly alkali metal cations. The obtained data testify to a substantial role of chainlike aggregation of anionic groupings and a variableness of structural mechanisms of formation of such chains in fluorozirconates for the development of translational diffusion in these compounds.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 573–582.Original Russian Text Copyright © 2005 by Kavun, Uvarov, Slobodyuk, Goncharuk, Kotenkov, Tkachenko, Gerasimenko, Sergienko.     

Synthesis and properties of chiral ammonium-based ionic liquids

New chiral ammonium-based ionic liquids containing the (1R,2S,5R)-(-)-menthyl group can be easily and efficiently prepared under ambient conditions. The preparation and characterization of trialkyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium salts is reported. The salts have been demonstrated to be air- and moisture-stable under ambient conditions and can be readily used in a variety of standard experimental procedures. The single-crystal X-ray structure of butyldimethyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium chloride has been determined. The chiral, room-temperature ionic liquids have been characterized by physical properties such as specific rotation, density, viscosity, thermal degradation, and glass transition temperature. Trialkyl[(1R,2S,5R)-(-)-menthoxymethyl]ammonium chloride prototype ionic liquids have also been found to exhibit strong antimicrobial and high antielectrostatic activities.     

Molecular Reorientational Dynamics of the Neat Ionic Liquid 1‐Butyl‐3‐methylimidazolium Hexafluorophosphate by Measurement of 13C Nuclear Magnetic Relaxation Data

The reorientational dynamics of the ionic liquid 1butyl‐3‐methylimidazolium hexafluorophosphate ([BMIM]PF₆) were studied over a wide range of temperatures by measurement of ¹³C spin–lattice relaxation rates and NOE factors. The reorientational dynamics were evaluated by performing fits to the experimental relaxation data. Thus, the overall reorientational motion was described by a Cole–Davidson spectral density with a Vogel–Fulcher–Tammann temperature dependence of the correlation times. The reorientational motion of the butyl chain was modelled by a combination of the latter model for the overall motion with a Bloembergen–Purcell–Pound spectral density and an Arrhenius temperature dependence for the internal motion. Except for C2 in the aromatic ring, an additional reduction of the spectral density by the Lipari–Szabo model had to be employed. This reduction is a consequence of fast molecular motions before the rotational diffusion process becomes effective. The C2 atom did not exhibit this reduction, because the librational motion of the corresponding C2? H vector is severely hindered due to hydrogen bonding with the hexafluorophosphate anion. The observed dynamic features of the [BMIM]⁺ cation confirm quantum‐chemical structures obtained in a former study.