Hydrolysis of (CH3)3Sn+ in Various Salt Media

The hydrolysis of trimethyltin(IV) has been studied by potentiometry (H⁺ -glass electrode) and calorimetry in various salt media (NaNO₃, NaCl, KCl, Na₂SO₄, and NaNO₃—NaCl mixtures). The effect of ionic strength on the hydrolysis constants is accounted for by a simple Debye–Hückel type equation and by Pitzer equations. The results allow us to obtain H for hydrolysis and the temperature dependence of the Pitzer parameters. The resulting coefficients can be used to examine the speciation of (CH₃)₃Sn⁺ in multicomponent electrolyte solutions, such as natural waters, over a wide range of temperature and ionic strength.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

[Me3NC2H4OH]Zn2Cl5水溶液的激光光解研究

利用时间分辨激光光解技术研究了季铵盐型离子液体[Me₃NC₂H₄OH]Zn₂Cl₅(简写R-Zn₂Cl₅)的光解行为, 研究发现离子液体能被266 nm激光单光子电离, 生成阳离子自由基、[Zn₂Cl₅]^•中性自由基和水合电子, 观察到胆碱激发三线态的存在, 并测定了离子液体光电离的量子产额为0.04. 利用266 nm激光对离子液体、胆碱、氯化锌、氯化钠的光解行为比较, 发现胆碱阳离子的贡献很小, [Zn₂Cl₅]^－阴离子起主要作用. 采用氧化性自由基SO₄^•－引发离子自由基, 揭示其光电离机理, 测定离子液体的动力学反应速率常数, SO₄^•－ 460 nm的衰减速率常数为1.3×10⁹ L•mol^－1•s^－1, 320 nm离子自由基瞬态产物的生成速率常数为1.5×10⁹ L•mol^－1•s^－1, 两者很接近, 说明SO₄^•－自由基的衰减与瞬态自由基的生成是同步的.     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.     

Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

Ionic liquid analogues formed from hydrated metal salts

A dark green, viscous liquid can be formed by mixing choline chloride with chromium(III) chloride hexahydrate and the physical properties are characteristic of an ionic liquid. The eutectic composition is found to be 1:2 choline chloride/chromium chloride. The viscosity and conductivity are measured as a function of temperature and composition and explained in terms of the ion size and liquid void volume. The electrochemical response of the ionic liquid is also characterised and it is shown that chromium can be electrodeposited efficiently to yield a crack-free deposit. This approach could circumvent the use of chromic acid for chromium electroplating, which would be a major environmental benefit. This method of using hydrated metal salts to form ionic liquids is shown to be valid for a variety of other salt mixtures with choline chloride.     

Electroconduction of Potassium Orthophosphate Modified with Triple-Charged Cations

Solid electrolytes in the systems K_{3 – 3x} Me _x PO₄ (Me = Sc, Y, In, La, Nd, Gd, Tb) are synthesized. Their phase composition and the temperature and concentration dependences of their electroconductivity are studied. In all the systems there form solid solutions based on K₃PO₄, which have a high potassium cation conductance. The latter is due to the formation of potassium vacancies at substitutions 3K⁺ Me³⁺ and, at lower temperatures, to stabilization of a high-temperature -modification of potassium orthophosphate. The electroconductivity of synthesized solid solutions, which equals (4–7) × 10^–3 and 10^–1 S cm^–1 at 300 and 700°C, is similar to that of solid electrolytes K_{3 – x} P_{1 – x} E _x ^VIO₄ and K_{3 – 4x} E _x ^IVPO₄.     

Optical and Bioelectrochemical Characterization of Water‐Miscible Ionic Liquids Based Composites of Multiwalled Carbon Nanotubes

Acidic treated multiwalled carbon nanotubes (AMWNTs) were ground with water‐miscible room temperature ionic liquids, 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄), and resulted in AMWNTs‐[bmim]BF₄ composite. Its electrical‐ionic conductivity and optical properties were compared with the other two types of carbon materials‐[bmim]BF₄ composites: pyrolytic graphite powder (PGP), pristine multiwalled carbon nanotubes (PMWNTs), through the ac impedance technology and Raman spectroscopy. The impedance data show that AMWNTs‐[bmim]BF₄ composite exhibits the highest conductivity. Raman spectra study exhibits that the [bmim]BF₄ can form gel with PMWNTs and AMWNTs but only form a viscous liquid with PGP. AMWNTs‐[bmim]BF₄ gel modified GC electrode was applied in direct electrochemistry of heme proteins (Hb and HRP) and it catalysis to the reduction of H₂O₂ was investigated.     

A lyotropic nematic phase of lamellar micelles (N L) obtained by a non-ionic surfactant in aqueous solution

A non ionic surfactant with a rigid rod-like hydrophobic group has been synthesized. Owing to the molecular geometry of the surfactant only lamellar micelles are formed in aqueous solution.This system exhibits a lyotropic nematic phase (N _L), which for the first time has been found for a binary non ionic surfactant/water system.Herrn Professor Dr. H.-G. Kilian mit herzlichen Glückwünschen zum 60. Geburtstag gewidmet.     

Effect of ionic interactions on the oxidation of Fe(II) with H2O2 in aqueous solutions

The oxidation of Fe(II) with H₂O₂ has been measured in NaCl and NaClO₄ solutions as a function of pH, temperature T (K) and ionic strength (M, mol-L^–1). The rate constants, k (M^–1-sec^–1), d[Fe(II)]/DT=-k[Fe(II)][₂O₂]at pH=6.5 have been fitted to equations of the formlog k = log k₀+ AI ^1/2+BI+CI ^1/2/T Where log k₀=15.53-3425/T in water; A=–2.3, –1.35; B=0.334, 0.180; and C=391, 235, respectively, for NaCl (=0.09) and NaClO₄ ( =0.08). Measurements made in NaCl solutions with added anions yield rates in the order B(OH) ₄ ^– >HCO ₃ ^– >ClO ₄ ^– >Cl^–>NO ₃ ^– >SO ₄ ^2– and are attributed to the relative strength of the interactions of Fe²⁺ or FeOH⁺ with these anions. The FeB(OH) ₄ ⁺ species is more reactive while the FeCO ₃ ⁰ , FeCl⁺, FeNO ₃ ⁺ and FeSO ₄ ⁰ species are less reactive than the FeOH⁺ ion pair. The general trend is similar to our earlier studies of the oxidation of Fe(II) with O₂ except for B(OH) ₄ ^– . The effect of pH on the logk was found to be a quadratic function of the concentration of H⁺ or OH^– from pH=4 to 8. These results have been attributed to the different rate constants for Fe²⁺ (k₀) and FeOH⁺ (k₁) which are related to the measured k by, k=k_0Fe + k_1FeOH, where _i is the molar fraction of species i. The rates increase due to the greater reactivity of FeOH⁺ compared to Fe²⁺. k₀ is independent of composition and ionic strength but k₁ is a function of ionic strength and composition due to the interactions of FeOH⁺ with various anions.