Influence of the nature of membrane ionogenic groups on water dissociation and electrolyte ion transport: A rotating membrane disk study

Polarization properties of electromembrane systems (EMS) consisting of a heterogeneous membrane, either the MK-41 phosphonic acid membrane or the MK-40 sulfonic acid membrane, and dilute sodium chloride solutions are investigated with the rotating membrane disk method. For the MK-41/0.01 M NaCl and MK-41/0.001 M NaCl EMS, effective ion transport numbers and partial current-voltage curves (CVC) are measured for sodium and hydrogen ions, and limiting-current densities and the diffusion-layer thickness are calculated as functions of the rotation rate of the membrane disk. With the theory of the overlimiting state of EMS, internal parameters of the systems under investigation—the diffusion-layer thickness, the space-charge distribution, and electric-field strengths in the diffusion layer and in the membrane—are calculated from experimentally obtained CVC and the dependence of effective transport numbers on current density. The catalytic influence of ionogenic groups on the dissociation rate of water is analyzed quantitatively. Partial CVC for H⁺ ions are calculated for the space-charge region in MK-40 and MK-41 membranes. Analogous CVC for bipolar membranes containing sulfonic acid and phosphonic acid groups are compared. The dissociation mechanism of water is the same in all EMS and is independent of the membrane type and the nature of the functional groups.     

Development of polyelectrolyte multilayer-coated electrospun cellulose acetate fiber mat as composite membranes

Electrostatic multilayers of chitosan (CHI)/sodium alginate (SA) and CHI/poly(styrene sulfonate) sodium salt (PSS) were alternatively coated on electrospun cellulose acetate (CA) fiber mat. Morphologies of the composite membranes were characterized by scanning electron microscopy. The morphology of the CHI/SA-coated membrane was denser than the CHI/PSS-coated one. The top layers consisted of carboxyl and sulfonic functional groups for SA and PSS layers, respectively. Amino groups of CHI were only presented in slight quantity. X-ray photoelectron spectroscopy (XPS) confirmed the deposition of the amino groups of CHI on the multilayer membrane surface. These composite membranes were characterized for its water permeability where the water flux decreased with an increase in the number of the bilayers. The water flux was in the range of 60 and 40 L m⁻² h⁻¹ for 15 and 25 bilayered membranes, respectively. The sodium chloride (NaCl) solution flux was lower than the pure water flux due to the effect of osmotic pressure, and it decreased with an increase in the NaCl concentration. The rejection of NaCl increased substantially with the number of the bilayers of the polyelectrolytes multilayers. The level of NaCl rejection from this work was in the range of 6% and 15% for 15 and 25 bilayered membranes, respectively.     

Efficient free energy calculation of water across lipid membranes

An efficient free energy (FE) calculation of a water molecule to go across lipid membranes is presented. Both overlapping distribution and cavity insertion Widom methods are complementarily used. The former is useful for a dense region where water molecules are found, i.e., from the interfacial to bulk water region, while the latter works well in the low density region, i.e., the hydrocarbon region. Since both methods evaluate the excess chemical potential of water, the obtained FE profile is free from the fitting problem usually arisen when a FE difference method is used. A diphytanyl phosphatidylcholine bilayer is used for our test calculations. An excellent and fast convergence of the chemical potential is obtained when each method is applied for the appropriate region. The estimated FE barrier using the Ewald method for the electrostatic interaction is approximately 7.2 kcal/mol, which is higher than that using the interaction cutoff of 20 A by about 0.9 kcal/mol.     

TRAJELIX: A Computational Tool for the Geometric Characterization of Protein Helices During Molecular Dynamics Simulations

Summary We have developed a computer program with the necessary mathematical formalism for the geometric characterization of distorted conformations of alpha-helices proteins, such as those that can potentially be sampled during typical molecular dynamics simulations. This formalism has been incorporated into TRAJELIX, a new module within the SIMULAID framework (http://inka.mssm.edu/~mezei/simulaid/) that is capable of monitoring distortions of alpha-helices in terms of their displacement, global and local tilting, rotation around their axes, compression/extension, winding/unwinding, and bending. Accurate evaluation of these global and local structural properties of the helix can help study possible intramolecular and intermolecular changes in the helix packing of alpha-helical membrane proteins, as shown here in an application to the interacting helical domains of rhodopsin dimers. Quantification of the dynamic structural behavior of alpha-helical membrane proteins is critical for our understanding of signal transduction, and may enable structure-based design of more specific and efficient drugs.     

Highly selective transport of silver ion through a supported liquid membrane using calix[4]pyrroles as suitable ion carriers

Facilitated transport of silver ion across a supported liquid membrane (SLM) by calix[4]pyrroles, as selective ion carriers, dissolved in kerosene has been investigated. The influences of fundamental parameters affecting the transport of silver ion including ion carrier concentration in the membrane phase, thiosulfate concentration in strip phase, picric acid concentration in the feed phase, stirring speed of aqueous phases, type of membrane solvent and time of transport have been studied. In the presence of thiosulfate as a suitable metal ion acceptor in the strip phase and picrate ion as ion pairing agent in the source phase, transport of silver occurs almost quantitatively after 75 min. The selectivity and efficiency of silver transport from aqueous solution containing Cu²⁺, Mg²⁺, Ni²⁺, Ca²⁺, Zn²⁺, Pb²⁺, Co²⁺, Al³⁺, Hg²⁺, Cd²⁺, Fe³⁺, Fe²⁺ and Cr³⁺ were investigated.     

Preparation,structure characteristics and separation properties of thin-film composite polyamide-urethane seawater reverse osmosis membrane

A novel thin-film composite (TFC) seawater reverse osmosis membrane was developed by the interfacial polymerization of 5-chloroformyloxyisophthaloyl chloride (CFIC) and metaphenylenediamine (MPD) on the polysulphone supporting membrane. The performance of the TFC membrane was optimized by studying the preparation parameters, which included the reaction time, pH of the aqueous-MPD solution, monomer CFIC concentration, additive isopropyl alcohol content in aqueous solution, curing temperature and time. The reverse osmosis performance of the resulting membrane was evaluated through permeation experiment with synthetic seawater, and the structure of the novel membrane was characterized by using SEM, AFM and XPS. Furthermore, the separation properties of the TFC membrane were tested by examining the reverse osmosis performances of various conditions, the boron rejection performance and the long-term stability. The results show that the desired TFC seawater reverse osmosis membrane has a typical salt rejection of 99.4% and a flux of about 35 L/m² h for a feed aqueous solution containing 3.5 wt.% NaCl at 5.5 MPa, and an attractive boron rejection of more than 92% at natural pH of 7–8; that the novel seawater reverse osmosis membrane appears to comprise a thicker, smoother and less cross-linking film structure. Additionally, the TFC membrane exhibits good long-term stability.     

New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Enantioselective, potentiometric membrane electrodes based on cyclodextrins: application for the determination of R-baclofen in its pharmaceutical formulation

Two enantioselective, potentiometric membrane electrodes based on α- and γ-cyclodextrins were proposed for the assay of R-baclofen. The slopes of the electrodes were 59.50 and 51.00 mV/pR-baclofen for α- and γ-cyclodextrin-based electrodes, respectively. The detection limits of the proposed electrodes were 7 × 10⁻⁹ mol l⁻¹ for α-cyclodextrin-based electrode and 1.44 × 10⁻¹⁰ mol l⁻¹ for γ-cyclodextrin-based electrode. The enantioselectivity was determined over S-baclofen. The proposed electrodes can be employed for the assay of R-baclofen raw materials and its pharmaceutical formulation, Norton-Baclofen^® tablets. The surfaces of the electrodes are stable and easily renewable by polishing on alumina paper.     

Preparation and characterization of mono-valent ion selective polypyrrole composite ion-exchange membranes

Polypyrrole composite cation- and anion-exchange membranes (CEM and AEM), in which polypyrrole (PPY) coated on one surface of the membrane as a thin layer, were prepared by chemical polymerization of pyrrole in the presence of high oxidant concentration (Na₂S₂O₈). Existence of polypyrrole layer on the both types of ion-exchange membranes were confirmed by recording their coating density, SEM images and conductivity. These membranes were extensively characterized by recording their properties such as water uptake, ion-exchange capacity, contact angle, permselectivity and membrane conductivity as a function of polymerization time such as. It was observed that due to coating of PPY for 2 h, membrane permselectivity of CEM for NaCl (0.907) was reduced to 0.873, while it was increased from 0.747 to 0.889 in the case of AEM. Similar behaviors were also obtained for bi-valent electrolytes. Electrodialysis experiments were also conducted with polypyrrole composite ion-exchange membranes using mixed electrolytic systems. Relative dialytic rates for NaCl with respect to other bi-valent electrolyte were varied in between 5 and 8 (depending on bi-valent electrolyte), which suggested the feasible and efficient separation of mono-valent from bi-valent electrolyte. Slower electro-migration of bi-valent electrolyte (CaCl₂, MgCl₂ and CuCl₂) in comparison to NaCl was explained on the basis of synergetic effect of sieving of bulkier bi-valent cations by tight and rigid polypyrrole layer and the difference in electrostatic and hydrophobic–hydrophilic repulsion force between bi-valent cations and mono-valent cation. It was concluded that these composite membranes are suitable for the efficient separation of same type of charged ions by electro-driven separation techniques.     

Performance of the general amber force field in modeling aqueous POPC membrane bilayers

The aim of this work was to answer the question of whether the general amber force field (GAFF) is good enough to simulate fully hydrated POPC membrane bilayers. The test system contained 128 POPC and 2985 TIP3P water molecules. The equilibration was carried out in a nonarbitrary manner to reach the stable liquid-crystalline phase. The simulations were performed by using particle mesh Ewald electrostatics implemented in molecular dynamics packages Amber8 (NPT ensembles) and NAMD2 (NPgammaT ensembles). The computational results were assessed against the following experimental membrane properties: (i) area per lipid, (ii) area compressibility modulus, (iii) order parameter, (iv) gauche conformations per acyl chain, (v) lateral diffusion coefficients, (vi) electron density profile, and (vii) bound water at the lipid/water interface. The analyses revealed that the tested force field combination approximates the experimental values at an unexpectedly good level when the NPgammaT ensemble is applied with a surface tension of 60 mN m(-1) per bilayer. It is concluded that the GAFF/TIP3P combination can be utilized for aqueous membrane bilayer simulations, as it provides acceptable accuracy for biomolecular modeling.